请稍候… 
我们正在处理您的订单，请稍候
请不要按返回按钮…
请不要按返回按钮…
在此输入您的增值税号，然后单击验证：
您的详细信息已经过验证。增值税号注册至：
,
。
现在，您的订单的增值税税率为零。我们保留在您提出订单请求后验证这些详细信息的权利，并在需要时恢复增值税。
您的增值税详细信息无法识别或无效。您的增值税号必须与上面指定的帐单国家/地区相匹配。当前指定为 。您无需输入增值税号的国家/地区代码部分，因为已在上面的帐单地址详细信息中选择了该部分。
增值税号查询服务目前已离线。请在下面的评论或特殊说明字段中提供您的增值税详细信息，我们将在您提出订单请求后应用增值税折扣。
Category Filter
保时捷 95B Macan 后减震器橡胶防尘罩 - 8K0512137A
8K0512137A/1
产品车辆组
- Porsche 95B.1 Macan Petrol 2.0L 237Bhp 2014-18
- Porsche 95B.1 Macan S Petrol 3.0L V6 340Bhp 2014-18
- Porsche 95B.1 Macan S Diesel 3.0L V6 258Bhp 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 360Bhp 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 400Bhp 2014-18
- Porsche 95B.2 Macan Petrol 2.0L 245Bhp 2019-21
- Porsche 95B.2 Macan S Petrol 3.0L V6 354Bhp 2019-21
- Porsche 95B.2 Macan GTS Petrol 2.9L V6 380Bhp 2019-21
- Porsche 95B.2 Macan Turbo 2.9L V6 440Bhp 2019-21
Information
后减震器橡胶防尘罩。
保时捷 Macan (95B) 车型的后减震器橡胶防尘罩用于保护后减震器轴。这种柔性防尘罩可防止灰尘、湿气和道路碎屑进入减震器活塞杆，从而防止内部密封件过早磨损，并确保悬架系统持久稳定运行。
单价出售，每辆车需要2个，两侧各一个。
适用：
配备标准悬架的汽车
保时捷 95B.1 Macan 2014 - 2018
保时捷 95B.2 Macan 2019 - 2021
保时捷 95B.3 Macan 2021 - 2024
图示编号 6
随着时间的推移，原厂防尘套会因老化、高温和道路污染物的影响而开裂或撕裂，导致减震器轴失去保护。更换防尘套可以保持后悬挂系统的完整性，并有助于延长减震器的使用寿命。
橡胶靴损坏或缺失可能导致：
•污染物进入阻尼器密封区域
•减震器过早磨损或泄漏
•降低行驶舒适性和振动控制
•悬架部件寿命缩短
更换防尘罩可以保护减震器免受环境磨损，并保持后悬架平稳运行。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
8K0512137A
您正在查看的产品与这些编号存在交叉引用关系
保时捷 Macan (95B) 车型的后减震器橡胶防尘罩用于保护后减震器轴。这种柔性防尘罩可防止灰尘、湿气和道路碎屑进入减震器活塞杆，从而防止内部密封件过早磨损，并确保悬架系统持久稳定运行。
单价出售，每辆车需要2个，两侧各一个。
适用：
配备标准悬架的汽车
保时捷 95B.1 Macan 2014 - 2018
保时捷 95B.2 Macan 2019 - 2021
保时捷 95B.3 Macan 2021 - 2024
图示编号 6
随着时间的推移，原厂防尘套会因老化、高温和道路污染物的影响而开裂或撕裂，导致减震器轴失去保护。更换防尘套可以保持后悬挂系统的完整性，并有助于延长减震器的使用寿命。
橡胶靴损坏或缺失可能导致：
•污染物进入阻尼器密封区域
•减震器过早磨损或泄漏
•降低行驶舒适性和振动控制
•悬架部件寿命缩短
更换防尘罩可以保护减震器免受环境磨损，并保持后悬架平稳运行。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
8K0512137A
8K0512137A
您正在查看的产品与这些编号存在交叉引用关系
€7.02
当前 €6.32
库存
相关产品
产品车辆组
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MK1 GT2 2007-09
Information
Shock Absorber Spring Hanger. REAR.
Fits:
Porsche 996 GT2 2001-05
Porsche 996 GT3 2004-05
Porsche 997 GT2 2007-09
Porsche 997 GT3 >>2008
Click 'Zoom in' for large parts diagram.
Diagram ref no 6
Price shown is for each.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
99633352992
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 996 GT2 2001-05
Porsche 996 GT3 2004-05
Porsche 997 GT2 2007-09
Porsche 997 GT3 >>2008
Click 'Zoom in' for large parts diagram.
Diagram ref no 6
Price shown is for each.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
99633352992
99633352992
您正在查看的产品与这些编号存在交叉引用关系
价格: €110.37
库存
产品车辆组
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
Information
Rear shock mount kit.
Fits:
Porsche 996 1999-04
These shock mounts use high strength hardened steel spherical bearings and are direct replacements for the factory mounts. The Teflon lined spherical bearings used in our kit are maintenance-free and require no supplemental lubrication. Included seals prevent contamination from water or grime, thus extending bearing life.
Porsche used spherical bearings on the 997 GT3 and Cup Cars. We went one step further and added larger bearings and weather-seals to ensure longevity.
Fully Weather Sealed
We've designed in weather seals to keep dirt out and extend product life. This is the only shock mount suitable for street or extended track use. Dirt and water contaminate ordinary products and accelerate wear.
Improved Shock / Coilover Performance
The spherical bearings pivot freely and eliminate the deflection that is inherent with the factory rubber bushings. This is important because:
The factory rubber acts as a spring in series with the shock. This rubber spring-action is completely un-damped and reduces the shocks ability to control the tire contact patch. The spherical bearing allows the damper to do its job and control the contact patch.
These will work with stock springs and coilovers.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
2152209
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 996 1999-04
These shock mounts use high strength hardened steel spherical bearings and are direct replacements for the factory mounts. The Teflon lined spherical bearings used in our kit are maintenance-free and require no supplemental lubrication. Included seals prevent contamination from water or grime, thus extending bearing life.
Porsche used spherical bearings on the 997 GT3 and Cup Cars. We went one step further and added larger bearings and weather-seals to ensure longevity.
Fully Weather Sealed
We've designed in weather seals to keep dirt out and extend product life. This is the only shock mount suitable for street or extended track use. Dirt and water contaminate ordinary products and accelerate wear.
Improved Shock / Coilover Performance
The spherical bearings pivot freely and eliminate the deflection that is inherent with the factory rubber bushings. This is important because:
The factory rubber acts as a spring in series with the shock. This rubber spring-action is completely un-damped and reduces the shocks ability to control the tire contact patch. The spherical bearing allows the damper to do its job and control the contact patch.
These will work with stock springs and coilovers.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
2152209
2152209
99633305903
您正在查看的产品与这些编号存在交叉引用关系
价格: €631.80
由供应商供货