请稍候… 
我们正在处理您的订单，请稍候
请不要按返回按钮…
请不要按返回按钮…
在此输入您的增值税号，然后单击验证：
您的详细信息已经过验证。增值税号注册至：
,
。
现在，您的订单的增值税税率为零。我们保留在您提出订单请求后验证这些详细信息的权利，并在需要时恢复增值税。
您的增值税详细信息无法识别或无效。您的增值税号必须与上面指定的帐单国家/地区相匹配。当前指定为 。您无需输入增值税号的国家/地区代码部分，因为已在上面的帐单地址详细信息中选择了该部分。
增值税号查询服务目前已离线。请在下面的评论或特殊说明字段中提供您的增值税详细信息，我们将在您提出订单请求后应用增值税折扣。
前下拉杆。保时捷 928 1986-95 - 92834306991
92834306991/2
产品车辆组
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Information
前部下拉链接。
这款前下拉杆可让您的保时捷 928 保持精准的操控和平衡。这款稳定杆专为 1986-1995 款车型设计。
每件均已售出。
每辆车需要 x2。
适合左手和右手。
适合:
故障症状/磨损的下拉链接：
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
92834306991
您正在查看的产品与这些编号存在交叉引用关系
这款前下拉杆可让您的保时捷 928 保持精准的操控和平衡。这款稳定杆专为 1986-1995 款车型设计。
每件均已售出。
每辆车需要 x2。
适合左手和右手。
适合:
- 保时捷 928S2 4.7L 1984-86
- 保时捷 928S4 5.0L 1987-92
- 保时捷928GT 5.0L 1989-91
- 保时捷928GTS 5.4L 1992-95年
图表参考编号 17
本产品的作用：
- 下拉杆（也称为稳定杆连杆或稳定杆）将前防倾杆/稳定杆连接到悬架臂或转向节。
- 转弯时，防倾杆通过在车辆两侧传递扭矩来抵抗车身侧倾。下拉杆将扭矩从防倾杆传递到两侧的悬架。
- 功能正常的下拉杆可确保杆有效抵抗倾斜，并且前端保持稳定且反应灵敏。
- 它必须允许一定程度的铰接（运动），以便当悬挂上下移动时，杆仍然可以保持其连接而不会受到束缚。
故障症状/磨损的下拉链接：
- 在颠簸或不平坦的路面上行驶时，前方发出咔嗒声或敲击声
- 转弯时车身过度侧倾——倾斜阻力较小
- 前端操控松散或模糊——汽车可能感觉不够灵敏或稳定
- 如果稳定杆没有固定住，轮胎磨损会不均匀
- 稳定杆效果变差——您可能会注意到横向稳定性下降
- 恢复稳定杆的功能，使汽车在转弯时保持更平稳，提高抓地力和可预测性
- 消除因磨损或松动的连杆而导致的前悬架噪音和松弛
- 保持操控平衡——故障的掉落链接可能导致双方行为不平衡
- 防止相关悬挂部件的额外磨损，以弥补故障链接
- 安全性和驾驶员信心——在动态驾驶、转弯或紧急操作中尤为重要
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
92834306991
92834306901
92834306991
您正在查看的产品与这些编号存在交叉引用关系
价格: €85.73
库存
相关产品
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
- Porsche 912E 4CYL 1976
Information
Sway bar mounting backer plate kit
1 kit required per car
Fits
Porsche 911 - 1974 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
For Retro-Fitting the Through Body Anti Roll Bar
Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.
Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
2270024
您正在查看的产品与这些编号存在交叉引用关系
1 kit required per car
Fits
Porsche 911 - 1974 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
For Retro-Fitting the Through Body Anti Roll Bar
Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.
Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
2270024
2270024
90134370303
91434307500
90134370301
90134370302
90134370303
90134370304
91134370306
91134379202
91134370310
91134379203
91134370313
您正在查看的产品与这些编号存在交叉引用关系
价格: €64.90
库存
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
- Porsche 912E 4CYL 1976
Information
Front QuickChange™ Blade Style Sway bar
1 kit required per car
Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
Front and Rear QuickChange™ Blade Style Sway Bar System
Blade style adjustable sway bar (anti roll bar) system is the ultimate choice for performance and tuning. This superior-quality system delivers unique features and advantages that are without rival. It is simply the best.The blade style adjuster mechanism varies roll stiffness with the angle of the blade. Set it vertically for full-stiff, horizontal for full-soft, and intermediate angles for other stiffness levels.
Blade style adjustment offers advantages over traditional adjustable sway bars including faster adjustment and superior geometry.
The rear sway bars fit 66mm bolt spacing on the sway bar mounts as equipped on 1978-1989 911 cars. 1965-1977 cars can be upgraded to the later 66mm type mounts
Perfect Geometry
Fixed-length arms ensure the angle of the drop links are not changed with stiffness adjustment. Geometry and kinematic behavior is always perfect. The bar always rotates freely, with low-friction, and without binding in all adjustment positions.
Traditional sway bars adjust roll stiffness by changing the length of the lever arm, at the same time changing the angle of the drop link. This can cause poor force-transmission angles in some positions. The result can be binding, high-friction, and excessive load on the mounts to the chassis.
Lightweight
Hollow bar reduces weight.
Fast and Easy Adjustment
No need to jack up the car or remove the wheels. Reach under the car, loosen one bolt to rotate the blade type adjuster. The angle of the blade defines the stiffness.
Literally about 1 minute to adjust, faster with practice.Infinitely variable adjustment lets you dial in the precise roll stiffness.
For track cars this fast-adjustment can be invaluable when time in the pits or paddock is short. Adjusting traditional sway bars is a lengthy process – jack up car, remove wheels, adjust, re-install wheels.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
227002
您正在查看的产品与这些编号存在交叉引用关系
1 kit required per car
Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
Front and Rear QuickChange™ Blade Style Sway Bar System
Blade style adjustable sway bar (anti roll bar) system is the ultimate choice for performance and tuning. This superior-quality system delivers unique features and advantages that are without rival. It is simply the best.The blade style adjuster mechanism varies roll stiffness with the angle of the blade. Set it vertically for full-stiff, horizontal for full-soft, and intermediate angles for other stiffness levels.
Blade style adjustment offers advantages over traditional adjustable sway bars including faster adjustment and superior geometry.
The rear sway bars fit 66mm bolt spacing on the sway bar mounts as equipped on 1978-1989 911 cars. 1965-1977 cars can be upgraded to the later 66mm type mounts
Perfect Geometry
Fixed-length arms ensure the angle of the drop links are not changed with stiffness adjustment. Geometry and kinematic behavior is always perfect. The bar always rotates freely, with low-friction, and without binding in all adjustment positions.
Traditional sway bars adjust roll stiffness by changing the length of the lever arm, at the same time changing the angle of the drop link. This can cause poor force-transmission angles in some positions. The result can be binding, high-friction, and excessive load on the mounts to the chassis.
Lightweight
Hollow bar reduces weight.
Fast and Easy Adjustment
No need to jack up the car or remove the wheels. Reach under the car, loosen one bolt to rotate the blade type adjuster. The angle of the blade defines the stiffness.
Literally about 1 minute to adjust, faster with practice.Infinitely variable adjustment lets you dial in the precise roll stiffness.
For track cars this fast-adjustment can be invaluable when time in the pits or paddock is short. Adjusting traditional sway bars is a lengthy process – jack up car, remove wheels, adjust, re-install wheels.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
227002
90134370303
91434307500
90134370301
90134370302
90134370303
90134370304
91134370306
91134379202
91134370310
91134379203
91134370313
2270020
2270022
您正在查看的产品与这些编号存在交叉引用关系
价格低至: €1,652.00
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
- Porsche 912E 4CYL 1976
Information
Sway bar backdate mounting kit
1 kit required per car
Fits
Porsche 911 - 1969 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
For Retro-Fitting the Through Body Anti Roll Bar
Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.
When installing many thru-body type front sway bars onto cars originally equipped with an under-body type sway bar. U tabs are welded to stock control arms in place of the 'loop' style bushing holders used on cars originally equipped with under body type front sway bars.
• Required For Through-Body Sway bar Conversions
• Not required for Elephant Racing Blade Type Sway bars
• Welding required for proper installation
Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
2270025_2270024
您正在查看的产品与这些编号存在交叉引用关系
1 kit required per car
Fits
Porsche 911 - 1969 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
For Retro-Fitting the Through Body Anti Roll Bar
Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.
When installing many thru-body type front sway bars onto cars originally equipped with an under-body type sway bar. U tabs are welded to stock control arms in place of the 'loop' style bushing holders used on cars originally equipped with under body type front sway bars.
• Required For Through-Body Sway bar Conversions
• Not required for Elephant Racing Blade Type Sway bars
• Welding required for proper installation
Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
2270025_2270024
2270025_2270024
90134370303
91434307500
90134370301
90134370302
90134370303
90134370304
91134370306
91134379202
91134370310
91134379203
91134370313
您正在查看的产品与这些编号存在交叉引用关系
价格: €84.96
由供应商供货