请不要按返回按钮…
在此输入您的增值税号，然后单击验证：
您的详细信息已经过验证。增值税号注册至：
,
。
现在，您的订单的增值税税率为零。我们保留在您提出订单请求后验证这些详细信息的权利，并在需要时恢复增值税。
您的增值税详细信息无法识别或无效。您的增值税号必须与上面指定的帐单国家/地区相匹配。当前指定为 。您无需输入增值税号的国家/地区代码部分，因为已在上面的帐单地址详细信息中选择了该部分。
增值税号查询服务目前已离线。请在下面的评论或特殊说明字段中提供您的增值税详细信息，我们将在您提出订单请求后应用增值税折扣。
- Porsche 991.1 GT3 RS 4.0L (500 Bhp) 2015-16
Fits:
Porsche 991.1 GT3 RS
Front splitters are very effective at producing front end downforce without significantly increasing drag and this is done by creating a large pressure delta between the top and bottom surfaces. We then incrementally improved the front splitter by adding design tweaks to the underside of the splitter to improve flow with our carbon splitter diffusers. All of this adds up to a front splitter kit for the 991.1 GT3RS that creates a large amount of additional front end downforce.
The splitter is produced from a carbon thermoplastic, which is the same material used in high forms of Motorsports. The material is not brittle, so no more issues with cracking like carbon fiber and ABS. It will not grab and bend under the car like aluminum units either. It is a great splitter material.
Bracketry was designed from scan data, precision cut and bent to ensure repeatability. The carbon diffusers were developed in CFD to promote flow and improve downforce generation. The splitter was designed to balance out large rear wings, more specifically our V1x for the chassis.
Kit Includes
- Carbon Polyweave Splitter
- Polyweave Grind Strake x 4
- Carbon Splitter Diffuser x 2
- Sheet Aluminum Diffuser Block Off x 2
- Sheet Metal Bracket Kit x 13
- Steel Cross Beam Tube
- Clevis x 4
- Splitter Support Rod Assy x 2
- Hardware Kit, Including all Hardware Necessary for a Seamless Install
Features
Greatly Increases Front End Downforce
Produces High Downforce for Large Rear Wings
Capable of Handling 300+ Lbs
Constructed From Carbon Thermoplastic, Which Offers Strength, Low Weight, Durability, and a Great Appearance
Same Material Used in Various Forms of Racing, Including Indy Car, NASCAR, and F1
Non-Invasive / Easy Install
Specifications
Front Splitter is Manufactured From Carbon Thermoplastic, Offering Superior Strength, Weight, Durability, and Appearance to Many Other Options
Will Not Grab and Bend Surfaces Like Aluminum Units
Will Not Crack and Break Like Carbon and ABS Units
Abrasive Resistant While Stiff
CNC Cut and Bent Brackets
Stainless Hardware Throughout
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
前保险杠由玻璃纤维制成（轻质部件）
适合：
保时捷 924 Carrera GT
保时捷 924 Carrera GT 前保险杠 - 带有所有原装安装点和进气口，以适应 924 制动风管
请注意：此部件属于特殊订单条款。将按订单生产，可能需要 6-8 周以上。如果不需要，则不能取消或退货。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
TK250a
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
前保险杠由玻璃纤维制成（轻质部件）
适合：
保时捷 924 Carrera GTR
924 Carrera GTR 前保险杠采用一体式设计，简化了组装。
请注意：此部件属于特殊订单条款。将按订单生产，可能需要 6-8 周以上。如果不需要，则不能取消或退货。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
TK275
您正在查看的产品与这些编号存在交叉引用关系