All Silencers / Mufflers
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)


- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)

Fits:
Porsche 911 GT3 RS (991.2) with OPF/GPF 2019 - 2020
Porsche 911 Speedster with OPF/GPF 2019 - 2020
Evolution Header Set (Titanium) must be mounted together with:
• Slip-On Line (Titanium) system S-PO/TI/15
or
• Slip-On Race Line (Titanium) system S-PO/TI/8.
An additional original Porsche stock bracket (Porsche p/n: 99111147391) is required for mounting the Akrapovič exhaust system. Please read the instructions carefully before the start of the installation.
Evolution Header Set converts the slip-on system into a full system designed to give noticeably increased power at higher revs. Handcrafted titanium headers incorporate 100 cpsi sports catalytic convertors and side mufflers—all designed to increase power and torque—the Evolution Header Set utilizes integrated catalytic convertors and the functionality of the exhaust valves to deliver an out-and-out attack on the senses. With the valves in the open position, it delivers a sportier and hard-hitting sound, but also has the option of a lower sound level when the valves are closed, perfect for use in more everyday locations. Offering an increased weight savings in the area behind the engine and the rear axle, the reduction will enhance the handling and improve performance.
When installing Akrapovič aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovič aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.
THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
E-PO
The product you are viewing cross references to these numbers





- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
Fits:
Porsche 997.1 GT3 3.6L 2007>>
Porsche 997.2 GT3 3.8L 2010>>
Porsche 991 (911) GT3 2014>>
Porsche 991 (911) GT3 RS 2014>>
Akrapovič's Slip-On Line represents the first step in the exhaust system tuning process and the muffler can easily be installed onto the Porsche GT3's original system. Built from hi-grade titanium and finished with two eye-catching double round tailpipes, this entry system makes the GT3 more powerful and lighter, and gives the car that unique Akrapovič sound. Designed to make the car stand out from the crowd and increase its appeal even more, the visual delight of the Akrapovič Slip-On can be further enhanced with the addition of an optional carbon- fibre rear diffuser. Beautifully handcrafted from the finest materials and designed to enrich the exclusive look of the titanium exhaust system, the diffuser is a must-have extra for any discerning owner.
TECHNICAL DATA
* measured with: Porsche 911 GT3 RS (991) 2014
Maximum power:
- kW: plus 4.5 at 7800 rpm
- HP (m): plus 6.1 at 7800 rpm
- HP (i): plus 6 at 7800 rpm
Maximum torque:
- Nm: plus 4.9 at 8100 rpm
- lb-ft: plus 3.6 at 8100 rpm
Weight:
- minus 1.1 kg / 2.4 lb
*** Mandatory Extra Part Required
Tail pipe set (Titanium) - part no TP-PO991RS/H/T
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
MTP-PO997GT3H
The product you are viewing cross references to these numbers





- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)

Superb dual-tone sports car sound; throaty and deep at idle and medium speeds
FEATURES:
• Fits all Porsche 991.2 GT3 / GT3 RS vehicles 2017+
• Mini Maxflo mufflers are radius stress relieved, hydro-formed cases that are pulse TIG welded using 2000 degree ceramic fiber and stainless steel wool packing.
• Constructed from high quality 14-16 gauge, C.N.C. mandrel bent T304L stainless steel
• Retains Sport Mode button functionality when used in conjunction with factory side mufflers
• Simple bolt-on installation
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9912GT3CMAX
The product you are viewing cross references to these numbers





- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
DesignTek Titanium sports exhaust system.

Fits:
Porsche 991.1 Turbo
Porsche 991.2 Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3601173170
The product you are viewing cross references to these numbers





- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)

FEATURES:
• Fits all Porsche 991.2 Carrera base models equipped with standard exhaust; does not fit with PSE (2016+); only fits S models as part of a complete exhaust package.
• Greatly improves horsepower and torque
• Dramatic improvement in sports car sound and power throughout the RPM range
• Constructed from high-quality .065" thick T304L stainless steel for optimum flow and maximum durability
• Designed and built in-house at Fabspeed in our full precision machine shop
• Direct bolt-on replacement for the factory center muffler
• All Fabspeed performance products are backed by the Fabspeed Limited Lifetime Warranty
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.





- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)

High quality SUS304 stainless steel exhaust rear section compatible with OE rear mufflers. Complimented by black chrome tail pipe in ⌀89mm
Designed for maximum flow and no restriction.
Reduced back pressure and better scavenging. More torque and horsepower across the RPM band.
Fits:
Porsche 991 GT3 3.8L 476 Bhp 2013 - 2017 (A175 engine)
Porsche 991 GT3 RS 4.0L 507 Bhp 2013 - 2017 (A175 engine)
Porsche 911 R 4.0L 507Bhp 2014-2017 (A176 engine)
Please note: This will not fit cars:
- with engine codes DNSA / DNSB - 4.0L with 520 Bhp
- released after 06/2017 with engine codes DGG / DGGA / DGGB
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606609136
The product you are viewing cross references to these numbers





- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
Porsche 991.2 3.0L cars without switchable exhaust system (PSE)
The silencers in this exhaust are linked to one another, creating a greater balance between the two silencers which improves flow, performance and provides a sports sound. It is a performance exhaust with a louder note and boasts significant power gains over OE system. This is race / offroad use only.
Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only.





- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)

High performance free-flowing X-pipe with catalyst bypass and tips replaces the heavy and restrictive factory rear mufflers and catalytic converters for improved power and fantastic sound.
FEATURES:
• Fits all 991.2 Turbo / Turbo S vehicles (2017+)
• NOTE: Fabspeed's Supersport X-Pipe RACE application includes cat bypass pipes with O2 bungs in the factory position, and is recommended for Off-Road Track Use Only
• Dramatic improvement in sports car sound and power throughout the RPM range
• Includes Deluxe Quad Style Tips in Polished Chrome finish; also available with polished GT2 Style Tips
• Constructed from high-quality 14-16ga C.N.C. mandrel-bent T304L stainless steel for optimum flow and maximum durability
• Simple bolt-on installation; no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9912TSSRX
The product you are viewing cross references to these numbers





- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
High performance free-flowing X-pipe with sport catalytic converters and tips replaces the heavy and restrictive factory rear mufflers and catalytic converters for improved power and fantastic sound; includes 200-cell HJS Sport Cats and Deluxe Quad-Style Tips.
FEATURES:
• Fits: all 991.2 Turbo / Turbo S vehicles (2017+)
• NOTE: Fabspeed's Supersport X-Pipe STREET application includes high performance 200-cell HJS Sport Catalytic Converters for improved flow and exhaust sound
• Dramatic improvement in sports car sound and power throughout the RPM range
Includes Deluxe Quad Style Tips in Polished Chrome finish; also available with polished GT2 Style Tips
• Constructed from high-quality 14-16ga C.N.C. mandrel-bent T304L stainless steel for optimum flow and maximum durability
• Simple bolt-on installation; no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty
Fabspeed's 200-cell high-flow catalytic converters are not C.A.R.B. certified and are for Off-Road Use ONLY in the state of California
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9912TSSSX
The product you are viewing cross references to these numbers





- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)

Fits:
Porsche 991.2 Carrera (except Turbo / GT3 / R)
For cars with Sport exhaust fitted or cars with sport exhaust bumper conversion (centre exit pipes)
Not suitable for cars built after April 2018 which have PPF fitted.
Please note: This system does not come with valve control system as you can use existing wiring from your sport exhaust. If you wish to have a wireless remote control kit you need to order one here in the basket stage.
Please note: These catalytic bypasses will make your car sound a lot louder than with stock cats. This exhaust is intended for offroad use and will be very loud . We recommend to use sport exhaust if you are concerned about decibel levels.
Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606009106
The product you are viewing cross references to these numbers





- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)

Fits:
Porsche 991.2 Carrera (except Turbo / GT3 / R)
For cars with Sport exhaust fitted or cars with sport exhaust bumper conversion (centre exit pipes)
Not suitable for cars built after April 2018 which have PPF fitted.
Please note: This system does not come with valve control system as you can use existing wiring from your sport exhaust. If you wish to have a wireless remote control kit you need to order one here in the basket stage.
Please note: These catalytic bypasses will make your car sound a lot louder than with stock cats. This exhaust is intended for offroad use and will be very loud . We recommend to use sport exhaust if you are concerned about decibel levels.
Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606009105
The product you are viewing cross references to these numbers





- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)

Optimized design that replaces the heavy and restrictive factory side mufflers for improved exhaust flow, increased sound and weight savings.
Utilizing premium Helical valves along with the addition of O2 bungs, Fabspeed's Side Muffler Bypass Pipes provide the ultimate track solution for the 991.2 GT3 / GT3 RS. When accompanied with our new Long Tube Competition Headers, our Side Muffler Bypass Pipes allow the maximum amount of exhaust flow possible from the 991.2 GT3 / GT3 RS engine.
HELICAL VALVES
We chose to use Helical Valves on our 991.2 GT3 / GT3 RS track exhaust systems for their unprecedented quality - which have been proven by many OEM manufacturers such as McLaren, Ferrari, Lamborghini, and many more. Helical valves are an integral part of our Side Muffler Bypass pipes, opening and closing with precision to control the gas flow and optimizing engine back-pressure for improved performance. Helical's extensive experience in high-volume OEM automotive applications has led to standard features such as an extremely durable pneumatic actuator, precision flat sealing faces inside the valve, stiffening ribs and high-temperature bearings at both ends of the butterfly spindle.
O2 BUNGS
We relocated the O2 bungs from the collector of the headers to the Side Muffler Bypass Pipes in order to maintain factory-like functionality with our Long Tube Competition Headers - allowing them to read all cylinders while maximizing the performance of the collector. This design will replace our existing SMBP's allowing you to upgrade to our Long Tube Race Header design at any time in the future.
FEATURES:
• Fits all Porsche 991.2 GT3 / GT3 RS vehicles (2017+)
• Highest quality Helical valves
• Includes O2 bungs for factory like functionality when paired with Fabspeed Long Tube Competition Race Headers
• Saves 34 lbs from the rear of the vehicle
• Replicates aggressive CUP car sound for the street
14-16ga T304 Stainless Steel construction
• Simple bolt-on installation
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty.
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9912GT3SMB
The product you are viewing cross references to these numbers





- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
Fits:
Porsche 991.2 Carrera (except Turbo / GT3 / R)
For cars with Sport exhaust fitted or cars with sport exhaust bumper conversion (centre exit pipes)
Not suitable for cars built after April 2018 which have PPF fitted.
Please note: This system does not come with valve control system as you can use existing wiring from your sport exhaust. If you wish to have a wireless remote control kit you need to order one here 9996001111
For Wiring Diagram please CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606009103
The product you are viewing cross references to these numbers





- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
Only for cars with Porsche Sports Exhaust (PSE)

Fits
Porsche 991.2 Carrera with PSE
Porsche 991.2 Carrera S with PSE
Porsche 991.2 GTS with PSE
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
INSTALLATION
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual. Replaces rear silencer/muffler
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips
EXHAUST FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION
2 + 2 CENTRAL
There are two pairs of tailpipes with a gap between them, in the centre of the rear bumper
MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
ECU REMAPPING
ENGINE LIGHT
Replacement or removal of components such as catalytic converters, GPFs and electric actuators may cause the engine warning light to come on.
In this case, the installer must reprogram the software to eliminate the light
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TSPO991T16.003.A
The product you are viewing cross references to these numbers





- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)

Fits
Porsche 911 (991.3) GT3 2019
Porsche 911 (991.3) Speedster 2019
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
INSTALLATION
Must be installed with OE headers for GPF (Gasoline Particulate Filter)
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
SOUND - STRAIGHT PIPE
The straight pipe version guarantees a direct path from the engine, removing all factors which may affect the acoustic tuning
END TIPS DESIGN - OBLIQUE CUT
Oblique-cut tailpipe with internal rolled lip
END TIPS DIMENSION- 100mm
The value refers to the external dimensions of the exhaust end tip
EXHAUST AND END TIPS FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION - 2 CENTRAL
The end tips emerge from the centre
MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 76
This is the diameter in mm of the main pipe of the exhaust system
EXHAUST VALVE
ELECTRIC
The exhaust system is complete with electric valve. The electric actuator is not included and the standard actuator already installed on the car must be used. Control of the original valve is still provided
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TSPO991GT3RS19.001.A
The product you are viewing cross references to these numbers





- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)

Fits
Porsche 911 turbo 991.1
Porsche 911 turbo S 991.1
Porsche 911 turbo 991.2
Porsche 911 turbo S 991.2
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
INSTALLATION
This kit includes the central silencer without bypass valves and replaces the catalytic converters and the rear silencer. The kit is compatible with all 991.1 and 991.2 turbo and turbo S models
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
ECU REMAPPING
ENGINE LIGHT
Replacement or removal of components such as catalytic converters, GPFs and electric actuators may cause the engine warning light to come on. In this case, the installer must reprogram the software to eliminate the light
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system
CATALYTIC CONVERTER REMOVAL
Complete removal of the catalytic converter minimises exhaust back pressure and delivers optimum results in terms of performance and weight reduction
NO EXHAUST BYPASS VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the driver via the specific control systems is no longer possible
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TSPO991T13.001.A
The product you are viewing cross references to these numbers



Title: Upgrading Your Porsche's Exhaust System: Original Porsche vs. Aftermarket Mufflers and Sports Exhaust
Keywords: Porsche, exhaust mufflers, sports exhaust, upgrade, replacement, technical specifications, known issues, Design911, professional advice
Summary:
Original Porsche Exhaust Mufflers:
Designed and manufactured by Porsche for specific models
Engineered to meet stringent quality standards
Precisely tuned for optimal performance and sound
Maintains the authenticity and originality of your Porsche
Compatible with existing components and systems
Aftermarket Exhaust Mufflers:
Produced by third-party manufacturers specializing in performance upgrades
Offer a wide range of options for customization
Can enhance exhaust note, performance, and aesthetics
May provide better flow dynamics for improved engine efficiency
Consider compatibility and fitment with your Porsche model
Sports Exhaust Systems:
Designed to maximize performance and enhance the driving experience
Typically include larger diameter pipes, sportier mufflers, and optimized airflow
Offer increased horsepower and torque
Produce a more aggressive and exhilarating exhaust sound
Check local regulations regarding noise restrictions
When considering purchasing an exhaust muffler or sports exhaust for your Porsche, several factors should be considered. Firstly, determine your specific requirements, whether it's a slight improvement in sound or a significant performance boost. Research the technical specifications and compatibility of the chosen exhaust system with your Porsche model. Consider your budget and the reputation of the manufacturer or retailer. It's crucial to ensure the product is backed by warranties or guarantees.
At Design911, we can assist you in finding the correct exhaust part for your Porsche. Our knowledgeable team can offer professional advice based on your requirements and guide you through the selection process. We stock a wide range of original Porsche parts as well as reputable aftermarket options, ensuring you have access to high-quality choices. Trust Design911 to help you enhance your Porsche's performance and provide an unmatched driving experience.
Note: The summary provided above is a general overview of the benefits and considerations related to upgrading the exhaust system of a Porsche vehicle. It's always recommended to consult with a professional and consider individual vehicle specifications and regulations before making any modifications.