Powerflex Black Series Bushes

Powerflex Black Series Replacement A-frame Arm Top & Bottom Bush.
Fits OE Wishbone Front (A-Frame) part numbers 91134190100 / 91134190200.

SET OF 4 BUSHES



Fits:
Does not fit models made before 1969, fits all models 1969 to 1989.
Porsche 911 1969-89
Porsche 912
Porsche 914 1970-76

Fits to No. 14 on the diagram

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-401BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Stabilizer Bar Bush Rear.
Sold as a pack of 4 bushes

Replacement for Porsche parts No. 90133379304.



Rear stabilizer bar bush - 16mm.
Rear drop link bush - 16mm.
Fits - left and right side.

Fits:
Porsche 911 1965-68 L / T / TU Rear 4 required per car
(Stabiliser bar and Drop link)

Porsche 914 1970-76 Rear 2 required per car
(Stabiliser bar)

Diagram Ref No 2.
Click 'Zoom in' for large parts diagram.


Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-412-16BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Torsion bar rubber mount, Front 13 mm
Sold as a pair

OEM Part Number: 90134379202



Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76

Note: Please check bar diameter before ordering.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.


Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-1403-13BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Torsion bar rubber mount, Front 14 mm

OEM Part Number: 90134379202



Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76

Note: Please check bar diameter before ordering.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.


Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-1403-14BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Torsion bar rubber mount, Front 15 mm
Sold as a pair

OEM Part Number: 90134379202



Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76

Note: Please check bar diameter before ordering.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.


Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-1403-15BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Torsion bar rubber mount, Front 16 mm
Sold as a pair

OEM Part Number: 90134379202



Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76

Note: Please check bar diameter before ordering.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.


Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-1403-16BLK

The product you are viewing cross references to these numbers

Powerflex replacement front drop link bracket bushes, the smaller round type that fit at the top & bottom of the drop link.

SET OF 4. Complete with metal inserts



Fits:
Porsche 911 1965-69
Porsche 911 1970-73
Porsche 911 1974-77
Porsche 930 1975-77
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Diagram Ref No. 34 and 35

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-402BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Front anti roll bar bush 23.5mm.
Sold as a pair

OEM Part Number: 99634379212

Note: Please check anti roll bar diameter before ordering.



Fits:
Porsche 986 Boxster 2.5L 1997-99 *M030 FRONT
Porsche 986 Boxster 2.7L 2000>> *M030 FRONT
Porsche 986 Boxster S 3.2L 2000>> **I029 FRONT

Porsche 987 Boxster 2.7L 2005-08 TIPTRONIC **I029 FRONT

Porsche 996 Carrera 1998-05 C2 COUPE TIPTRONIC FRONT
Porsche 996 Carrera 1998-05 C2 COUPE *M030 FRONT
Porsche 996 Carrera 1998-05 CABRIO FRONT
Porsche 996 Carrera 1998-05 TARGA MANUAL FRONT
Porsche 996 Carrera 1998-05 C4 *M030 FRONT
Porsche 996 Carrera 2001-05 C4S FRONT
Porsche 996 Turbo 2001-05 Standard Chassis FRONT

Porsche 997 MKI Carrera 2005-08 C2 MANUAL **I029 FRONT
Porsche 997 MKI Carrera 2005-08 C4 WITH PASM FRONT
Porsche 997 MKI Carrera 2005-08 C4S WITH PASM FRONT
Porsche 997 MKI Carrera 2005-08 TARGA WITH PASM FRONT
Porsche 997 MKI Turbo 2008-09 FRONT

* M030 - Cars with Sport-type chassis
** I029 - Cars with Standard chassis


Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-501-23.5BLK

The product you are viewing cross references to these numbers

Front strut top mount bush
Sold as a pair (both strut tops)

Fits onto part number: 91134101800



Fits:
Porsche 911 1965-1989
Porsche 914 1970-1976

Click 'Zoom in' for large parts diagram.
Fits to No 9 on the diagram.


Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-406BLK

The product you are viewing cross references to these numbers

Powerflex Black series front wishbone (A-Frame) rear rubber bush.
Sold as a pair (both arms)



Fits:
Porsche 911/911S 1965-1967

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-1402BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Stabilizer Bar Bush Rear.
Stabilizer Bar Bush Rear - 18mm.
Drop Link Bush Rear - 18mm.
Fits - left and right side.



SET OF 4

Replacement for Porsche parts No. 91133379302.

Fits:
Porsche 911 1974-77 Rear
Porsche 911 Turbo 1975-77
Porsche 914 1970-76 Rear

Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.


Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-412-18BLK

The product you are viewing cross references to these numbers

Powerflex Black series Front Control Arm Bushing. Bushing on the front side of the front control arm.

Sold as a pair (both arms)



OEM Part Number: 91434142200, 91434142201

Fits:
Porsche 911/911S 1965-1967
Porsche 912 1965-1967

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-1401BLK

The product you are viewing cross references to these numbers