Inlet Manifold
Air intake pipe to throttle body gasket. Porsche 911 65-73
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 914 (1970-1976)
Fits:
Porsche 911 1965-69 L / T / TU / S WEBER Carburettor cars
Porsche 911 1970-73 T / T-V ZENITH Carburettor cars
Porsche 914-6 1970-76
Click 'Zoom in' for large parts diagram.
Diagram ref no 3
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110839801
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Air intake pipe to throttle body gasket. Porsche 911 65-73
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 914 (1970-1976)
Fits:
Porsche 911 1965-69 L / T / TU / S WEBER Carburettor cars
Porsche 911 1970-73 T / T-V ZENITH Carburettor cars
Porsche 914-6 1970-76
Diagram ref no 3
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110839801
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Air intake pipe to throttle body gasket. Porsche 911 69-77
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Fits:
Porsche 911 1969>> E / S
Porsche 911 1970-73 T-E / E / S
Porsche 911 1974-77 911/83
Click 'Zoom in' for large parts diagram.
Diagram ref no 23
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91111019101
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Air intake pipe to throttle body gasket. Porsche 911 69-77
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Fits:
Porsche 911 1969>> E / S
Porsche 911 1970-73 T-E / E / S
Porsche 911 1974-77 911/83
Click 'Zoom in' for large parts diagram.
Diagram ref no 23
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91111019101
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Air intake velocity stack set. Porsche 911 S
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Set contains 6 stacks
Fits:
Porsche 911S - 1970 to 1973
42mm velocity stack for Porsche 911 S engines, 2.2ltr and 2.4ltr - Not for Sportomatic
This high-quality aluminum velocity stack, with a diameter of 42mm, is specially designed for use in Porsche 911 S engines built between 1970 and 1973.
The funnel set ensures a precise fit and compatibility with the corresponding vehicle models.
Made from durable materials and manufactured to the highest quality standards, this funnel provides optimum performance for your Porsche 911 S.
The 42mm diameter allows for efficient airflow.
Diagram ref no 30
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91111032203
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Fuel injection throttle body kit with air horns. Porsche 911 2.0ltr / 2.7ltr
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911 2.0ltr - 1965 to 1968
Porsche 911 2.2ltr - 1969 to 1971
Sizes Porsche 911 intake manifolds
Carburetor/Bosch MFI Ø32mm engine side - Ø40mm ITB side. Recommended for early 2.0ltr / 2.2ltr engines
Injectors options that can be used - 260cc / 300cc / 380cc / 420cc / 480cc / 520cc
This is a direct replacement kit for replacing carburetors while keeping the OEM look in your engine bay.
The intake manifolds and riser plates are manufactured out of a single piece of 6082 aluminum and come in 2 styles. These differ in design due to the shape of the mounting flange for the cylinder head. The intake manifold can be used as replacement parts for the OEM part when damaged or has to be replaced*.
The ITBs are manufactured out of cast aluminum, whist the fuel rails are made out of aluminum 6060 extrusion profile and come with AN6 ORB connection for the fuel lines. The direct mount fuel pressure regulator is directly mounted to the fuel rails, so in this case you don’t need to drill additional holes in the engine bay for mounting a fuel pressure regulator.
The throttle linkage and all mounting hardware is made from stainless steel and the pivoting point of the throttle linkage is a ball and socket design for smooth operation. The levers allow you to adjust and finetune mechanical movement of the ITBs
The dimensions of the assembly are the same as the OEM carburetor setup and the riser plate comes with same mounting holes as the OEM carburetors, in this way you are able to use the OEM air filter box and OEM airhorns. Also the riser plates come with mounting options for an air intake temperature sensor, this is nicely hidden away between the ITBs. The diameter for the ITBs in the riser plate is 45mm. There is also an option for using airhorns, In this case you don’t need the riser plates.
The crank sensor and trigger wheel kit are additional and this type of kit is needed when using ITBs like these. Besides switching to ITBs you will need a stand alone ECU to get the fuel injection to work. Our kit only works with engines like the 3.0ltr that came with a “ big distributor”. You can leave the distributor or you can remove this unit when you are going to use a discoil type of ignition. In for case an adapter is included in the crank sensor kit. The pulley comes in 2 dimensions to choose from, a Ø116mm pulley and Ø126,5mm pulley.
Fuel injectors, fuel lines, standalone ECU, wiring harness are NOT included in the kit.
*In case of using as a replacement part 3 mounting holes for the carburetors or ITBs need to be re thread with a timesert or helicoil. Otherwise it is impossible to mount a threaded stud.
Kit Includes
2 x Full billet, hard anodised intake manifolds
6 x ITB complete with lever assembly
6 x Airhorns 45mmØx30mm
2 x Fuel rail with mounting hardware
1 x Throttle linkage with 2 throttle connection rods
1 x Direct mount fuel pressure regulator
2 x Riser plates with 1 air temperature sensor (for use with OEM air filter box)
1 x Crank sensor and trigger wheel kit (optional)
All needed gaskets and mounting hardware.
Shop Securely
12 Month Warranty
Worldwide Delivery
.jpg?width=197 "Injection intake manifold. Porsche 911E / 911S 1969 - 90111003101, 90111004301")
Injection intake manifold. Porsche 911E / 911S 1969
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Sold separately - 2 per car
Fits:
Porsche 911E 2.0ltr - 1969 only
Porsche 911S 2.0ltr - 1969 only
OPTIONS:
1. 90111004301 - 911E with 901 110 317 0R cast into the body
2. 90111003101 - 911S with 901 110 309 0R cast into the body
Intake manifold for the 1969 model year Porsche 911E and 911S only.
The 1969 model year 911E and 911S were the first 911 models with the mechanical piston pump injection system (MFI).
The diameter is 36mm to the throttle body and 38mm to the velocity stack and the pitch of the studs to the throttle body is 66 mm.
These intake manifolds are identical on the left and right and are sold separately - 2 required per car
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9011100
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Seal for intake manifold. Porsche 911 65-73 / 914-6
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Sold each.
Fits:
Porsche 911 E 1969-71
Porsche 911 /L/TU/T
Porsche 911 T / 911 T-V
Porsche 911 T-E/E 1972-73
Porsche 914-6 1970-76
Diagram ref no 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110839104
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Seal for intake manifold. Porsche 911 65-73 / 914-6
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Sold each.
Fits:
Porsche 911 E 1969-71
Porsche 911 / L / TU / T
Porsche 911 T / 911 T-V
Porsche 911 T-E / E 1972-73
Porsche 914-6 1970-76
Diagram ref no 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110839104
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Velocity stack 38mm. Porsche 911 1965-76
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Sold each - 6 required per car
Fits:
Porsche 911 - 1965 to 1969
Porsche 911 E Sportomatic - 1970 to 1973
Enhance the engine compartment of your Classic Porsche with a high-quality reproduction of a long-discontinued Porsche part.
Designed using SolidWorks CAD and precisely molded for a perfect fit with a period correct look
HDPE construction with reinforced mounting tabs
These velocity stacks will fit the following applications:
3 barrel Weber and Zenith Carburetors
Porsche Mechanical Fuel Injection Throttle Bodies
Will not fit PMO Induction Carburetors or EFI Systems
Measures 2” Tall with a 38mm Bore
Sold Individually, Order (6) and Make Your Engine Look Like New
Click 'Zoom in' for large parts diagram.
Diagram ref no 30
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91111032202
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Velocity stack 42mm. Porsche 911 1965-76
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Sold each - 6 required per car
Fits:
Porsche 911S - 1970 to 1973
Enhance the engine compartment of your Classic Porsche with a high-quality reproduction of a long-discontinued Porsche part.
Designed using SolidWorks CAD and precisely molded for a perfect fit with a period correct look
HDPE construction with reinforced mounting tabs
These velocity stacks will fit the following applications:
3 barrel Weber and Zenith Carburetors
Porsche Mechanical Fuel Injection Throttle Bodies
Will not fit PMO Induction Carburetors or EFI Systems
Measures 2” Tall with a 42mm Bore
Sold Individually, Order (6) and Make Your Engine Look Like New
Diagram ref no 30
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91111032203
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Velocity stack 46mm. Porsche 911 1965-76
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Sold each - 6 required per car
Fits:
Porsche 911 - 1965 to 1973
Porsche 911 2.7 Carrera MFI - 1974 to 1976
Enhance the engine compartment of your Classic Porsche with a high-quality reproduction of a long-discontinued Porsche part.
Designed using SolidWorks CAD and precisely molded for a perfect fit with a period correct look
HDPE construction with reinforced mounting tabs
These velocity stacks will fit the following applications:
3 barrel Weber and Zenith Carburetors
Porsche Mechanical Fuel Injection Throttle Bodies
Will not fit PMO Induction Carburetors or EFI Systems
Measures 2” Tall with a 46mm Bore
Sold Individually, Order (6) and Make Your Engine Look Like New
Click 'Zoom in' for large parts diagram.
Diagram ref no 30
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91111032201
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
