Top Mounts KIT Sealed Camber Plates for Porsche 997 4WD - SUSPENSIONKIT21
SUSPENSIONKIT21
Vehicle Group
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
Information
Top Mounts KIT
Ultimate replacement for factory rubber bush mount. Compatible with OE and aftermarket struts. Mounting holes allow for more than 1 deg of extra negative camber. CNC machined 6061 black anodized aluminum construction with stainless steel hardware. Reduces front wheel camber changes during hard cornering to maintain optimum tire contact for improved traction.
Ultimate replacement for factory rubber bush mount. Compatible with OE and aftermarket struts. Mounting holes allow for more than 1 deg of extra negative camber. CNC machined 6061 black anodized aluminum construction with stainless steel hardware. Reduces front wheel camber changes during hard cornering to maintain optimum tire contact for improved traction.
Fits:
Porsche 997.1 C4 / C4S
Porsche 997.2 C4 / C4S
About kit
This kit is comprised of the following items:
1 x Front monoball shock top mount - Set of 2 for Porsche 996 / 997 C4 (360250996F4
1 x Rear monoball shock top mount - Set of 2 for Porsche 997 (360250997R
€765.82
Now €727.53
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Related products
Rennline Sealed Front Camber Plates SET OF 2 for Porsche 996 2WD / 986 Boxster
Code: S20
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
Information
Rennline Sealed Front Camber Plates.
SET OF 2
Fits
Porsche 996 C2 3.4L / 3.6L 1998-2005 (2 Wheel Drive)
Porsche 986 Boxster 1997-04
Under extreme conditions, such as road racing and autocross, negative camber is required to keep as much of the tire's contact patch on the road as possible. Stock suspension mounts will not allow you to achieve the necessary amount of negative camber required for this type of performance driving. Rennline's sealed camber plates incorporate FK motorsports spherical bearings and eliminate the indistinct feedback associated with factory rubber mounts. Comes as a set of two. Why are Rennline's strut mounts the best ?
* Drastically increased bearing life due to the integrated factory GT3 weather seals.
* FK Motorsport Teflon-lined spherical bearings.
* Rigid bearing mount, not clipped in like some products available.
* Specially machined upper nut to allow clearance for maximum negative camber settings.
* Allows for up to 1.25 degrees of added negative camber.
* Special tool included to hold strut shaft from turning when tightening upper nut.
* Can be used with all factory and aftermarket struts, Including factory non adjustable units.
* Webbed machined base for light weight and superior strength.
* Fully rebuildable
* CNC machined 6061 anodized aluminum construction with stainless steel hardware.
Note: When using factory non adjustable struts with factory spring seats, weather seal must be remove
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S20
The product you are viewing cross references to these numbers
SET OF 2
Fits
Porsche 996 C2 3.4L / 3.6L 1998-2005 (2 Wheel Drive)
Porsche 986 Boxster 1997-04
Under extreme conditions, such as road racing and autocross, negative camber is required to keep as much of the tire's contact patch on the road as possible. Stock suspension mounts will not allow you to achieve the necessary amount of negative camber required for this type of performance driving. Rennline's sealed camber plates incorporate FK motorsports spherical bearings and eliminate the indistinct feedback associated with factory rubber mounts. Comes as a set of two. Why are Rennline's strut mounts the best ?
* Drastically increased bearing life due to the integrated factory GT3 weather seals.
* FK Motorsport Teflon-lined spherical bearings.
* Rigid bearing mount, not clipped in like some products available.
* Specially machined upper nut to allow clearance for maximum negative camber settings.
* Allows for up to 1.25 degrees of added negative camber.
* Special tool included to hold strut shaft from turning when tightening upper nut.
* Can be used with all factory and aftermarket struts, Including factory non adjustable units.
* Webbed machined base for light weight and superior strength.
* Fully rebuildable
* CNC machined 6061 anodized aluminum construction with stainless steel hardware.
Note: When using factory non adjustable struts with factory spring seats, weather seal must be remove
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S20
99734301801
99634398037
The product you are viewing cross references to these numbers
€810.66
Now €770.13
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
QuickChange camber plates. Porsche 996 C2 / 997 C2 / 986 / 987
Code: 2152205
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 GT3 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche 914 (1970-1976)
Information
QuickChange™ Camber Plates.
Sold per kit, 1 kit req'd per car.
Porsche 996 / 997 C2 models 1999-2012
Porsche 986 / 987 1997-12
Elephant Racing's QuickChange™ Camber plates offer true ease of adjustment. The "slider" design allows a full range of adjustment without the need for removing and rotating the plate for C2, C4, and Turbo models.
More Camber
Range of adjustment is extreme, with 19mm of added travel. This delivers over 2 degrees of added camber, allowing even DOT-R tires and slicks to produce maximum grip.
QuickChange Camber Plate for C4 and Turbo Models
The Quickchange camber plates are available for C2, C4 and Turbo models and work with stock-type springs and coilovers. They will not raise ride height when used with stock-type springs.
Higher Performance
Spherical bearings further improve performance. The spherical bearings pivot freely, but eliminate the deflection that is inherent with the factory rubber bushings. This is important for two reasons;
– The factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.
– The factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.
Fully Weather Sealed
The included spherical bearings are oversized, maintenance-free, and PTFE lined – they never need lubrication.
Integrated weather seals on both bottom and top of the spherical bearing extend bearing life. Dirt and water enter competing non-sealed products to accelerate bearing wear. Worse yet are bottom-only seals that can actually trap water that enters the open bearing top!
Our weather seals are fully compatible with coilovers and stock type springs.
Use Stock Springs or Coilovers
Fully compatible with stock springs and aftermarket lowering springs. Also supports coilovers that use and upper spring perch.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2152205
The product you are viewing cross references to these numbers
Sold per kit, 1 kit req'd per car.
Porsche 996 / 997 C2 models 1999-2012
Porsche 986 / 987 1997-12
Elephant Racing's QuickChange™ Camber plates offer true ease of adjustment. The "slider" design allows a full range of adjustment without the need for removing and rotating the plate for C2, C4, and Turbo models.
More Camber
Range of adjustment is extreme, with 19mm of added travel. This delivers over 2 degrees of added camber, allowing even DOT-R tires and slicks to produce maximum grip.
QuickChange Camber Plate for C4 and Turbo Models
The Quickchange camber plates are available for C2, C4 and Turbo models and work with stock-type springs and coilovers. They will not raise ride height when used with stock-type springs.
Higher Performance
Spherical bearings further improve performance. The spherical bearings pivot freely, but eliminate the deflection that is inherent with the factory rubber bushings. This is important for two reasons;
– The factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.
– The factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.
Fully Weather Sealed
The included spherical bearings are oversized, maintenance-free, and PTFE lined – they never need lubrication.
Integrated weather seals on both bottom and top of the spherical bearing extend bearing life. Dirt and water enter competing non-sealed products to accelerate bearing wear. Worse yet are bottom-only seals that can actually trap water that enters the open bearing top!
Our weather seals are fully compatible with coilovers and stock type springs.
Use Stock Springs or Coilovers
Fully compatible with stock springs and aftermarket lowering springs. Also supports coilovers that use and upper spring perch.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2152205
2152205
99734301801
99634398037
The product you are viewing cross references to these numbers
€712.72
Now €677.08
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Strut top mount monoball cartridge. Porsche 986/987/996/997
Code: 2011002
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
Information
Strut top mount monoball cartridge.
1 kit required per axle
Fits
Porsche 986 Boxster - Front and Rear
Porsche 987 Boxster - Front and Rear
Porsche 987 Cayman - Front and Rear
Porsche 996 - Front Only
Porsche 997 - Front Only
Cartridges install easily to replace rubber bushings for 996/997/Boxster/Cayman. An excellent alternative to our QuickChange Camber Plates for cars that don't need more camber but still want the handling precision of a spherical bearing monoball. Spherical bearings improve performance. The spherical bearings pivot freely, but eliminate the deflection that is inherent with the factory rubber bushings.
Eliminating Deflection Is Important For Two Reasons
• The factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.
• The factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2011002
The product you are viewing cross references to these numbers
1 kit required per axle
Fits
Porsche 986 Boxster - Front and Rear
Porsche 987 Boxster - Front and Rear
Porsche 987 Cayman - Front and Rear
Porsche 996 - Front Only
Porsche 997 - Front Only
Cartridges install easily to replace rubber bushings for 996/997/Boxster/Cayman. An excellent alternative to our QuickChange Camber Plates for cars that don't need more camber but still want the handling precision of a spherical bearing monoball. Spherical bearings improve performance. The spherical bearings pivot freely, but eliminate the deflection that is inherent with the factory rubber bushings.
Eliminating Deflection Is Important For Two Reasons
• The factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.
• The factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2011002
2011002
99634301804
99734301801
99734301800
99734301801
99634398008
99634398037
98633305903
98733305900
98633305904
98733305900
98633305906
The product you are viewing cross references to these numbers
€460.20
Now €437.19
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery