do not press the back button…
-
Engine Parts
-
- Engine Rebuild Parts Oil System Parts Fuel System Parts Gaskets & Sets Radial Seal / RMS / Camshaft / Balance shaft Belts / Tensioners / Rollers Chains & Tensioners Engine Bearings / Shells Engine Valves / Guides / Springs Rocker Arms & Tappets Engine Bolts / Studs Engine Mounts Engine Cylinders / Liners / Pistons Connecting Rod Cylinder Head / Camshaft Carrier Camshaft gears / sprockets and fixings Crankcase Parts Crankshaft & Parts Turbo Chargers / Intercoolers & Parts Specialist Tools
-
Brakes
-
- Brakes Brake Pads & Disc Package Brake Disc Standard Brake Pads Standard SPORTS Brake Disc Brembo Standard brakes Brembo Racing brakes TEXTAR Brakes PAGID Racing Brakes Manthey Racing Brake Pads Zimmermann Brakes Giro Slotted Brake Disc SHW Performance Brakes EBC Brakes Replacement for Ceramic Disc Brake Pad Wear Sensors Brake Pad Anti-vibration shims Caliper Bolts / Disc Screws Pin Kit and Guide Plates Performance Brake Hoses Standard Brake Hoses Caliper and Brake Lines Brake Calipers All Categories
-
-
Suspension & Steering
-
- Steering Parts Steering Gaiter Track Rods Power Steering Pipes / Hoses / Radiators
-
-
Transmission
-
- Gearbox / Transmission Clutch Kits Clutch Kits - High Performance Clutch Release Bearings Gearbox Parts Driveshafts & Parts Gasket Sets / Gaskets / Seals / Lock Nuts Gearbox Mounts Gearshift Control Parts Flywheel / Torque CV Joints Kits CV Boots and Kits Cardan Shaft / Prop Shaft Transmission Parts Gearbox / Differential Oil Gearbox Sump / Oil Pan Front Differential Rear Differential Transmission Cooling
-
-
Cooling & Heating
-
- Heating / Air Conditioning Air con condensers & desiccators Air con pipes Compressors Blower Motors & Fans Heater hoses & pipes Temperature Sensors / Switches
-
-
Electrical & Lighting
-
Body & Exhaust
-
- Chassis / Bodywork Restoration Chassis / Repair Panels Front Lid Damper Rear Lid Damper Bonnets / Locks & Latches Boots / Rear Lid / Locks and Latches Bumpers Front Bumpers Rear Door Handles | Locks | Keys Door Panels | Hinges | Striker Plates Window Lifters | Motors Wings Front & Parts Wings Rear & Parts Side Sill Panels Mirrors & Parts Stone Chip Foils / Stickers Undertrays Chassis & Engine Front Wiper Arms & Blades Rear Wiper Arms & Blades Wheel Arch Liners & Covers Roof - Cabrio / Targa / Coupe / Speedster Roll Cages Plastic Covers All Categories
-
-
Lubricants & Fluids
-
- Service Parts Service Kits Oil Filters Air Filters Pollen/Particle Filters Belts All Types Spark Plugs Ignition Coils Front Wiper Arms & Blades Rear Wiper Arms & Blades Gearbox Service Parts Engine Oil & Lubricants - Mobil Engine Oil & Lubricants - Total Engine Oil & Lubricants - Castrol Engine Oil & Lubricants - Motul Engine Oil & Lubricants - Millers Oils NanoDrive Engine Oil & Lubricants - Millers Oils Fuel Additives Garage PPE
-
-
All Parts
-
- Parts Accessories Chassis / Bodywork Brakes Clothing & Gifts Electrical & Relays Engine Cooling Engine Electrical Engine Rebuild Parts Engine Tuning Exhausts Exterior Styling / Spoilers Gearbox / Transmission Heating / Air Conditioning Hydraulics Interior & Accessories Incar / Multimedia Lighting Mats & Carpets Motorsport and Off-Road Pedal Cluster Rubber Seals Seats & Seat Belts All Categories
-
- Back to main website
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
DesignTek Carbon Ceramic Front Brake Discs, 410x36mm. Porsche 991 GT2 / GT3 / 992 Turbo / GTS ❭ 36040092GTSCF
- Porsche 991.1 GT3 3.8L (475Bhp) 2014-16
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Turbo 3.8L 2020-24
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
Brake Disc Ø: 410mm
Brake Disc Thickness: 36mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Front Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche 991.1 GT3 3.8L (475Bhp) 2014-16
Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
Porsche 992.1 Turbo 3.8L 2020-24
Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics.
Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Front Brake Discs offer a premium, precision-engineered solution.
Product Features:
- Carbon ceramic construction for high heat tolerance and fade-resistant braking
- Direct OE replacement fitment for vehicles originally equipped with carbon ceramic systems
- Lightweight design reduces unsprung and rotating mass for quicker response
- Exceptional thermal stability and wear resistance
- Designed for use with OE and compatible aftermarket calipers
- Pairs perfectly with DesignTek CCB-compatible brake pads (recommended)
- Ideal for high-performance road use and track performance driving
Important Fitment & Usage Notes:
- Carbon ceramic discs must be used with CCB-compatible brake pads — not standard iron-disc pads
- Compatible with OE and selected aftermarket calipers that are designed for carbon ceramic use
- Not suitable for use with pads or calipers that aren’t expressly rated for carbon ceramic applications
- Before ordering, please confirm caliper compatibility and pad selection to ensure optimal performance and safety.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040092GTSCF
The product you are viewing cross references to these numbers
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Vented, Perforated, Two-piece floating brake disc, Coated
Outer diameter: 350 mm
Brake Disc Thickness: 34 mm

- Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
The compound brake disc developed by Zimmermann accommodates the increased demands incurred by engine tuning and optimised chassis structures.
Your advantages:
• Excellent deceleration action and no distortion of friction ring at high temperatures
• Substantial weight saving and therefore less unsprung mass
• Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
• „Hot spots" prevented by optimised design of ventilation channels
• 1:1 exchange of original disc possible
• Not subject to registration: general ABE certification supplied with disc
• No conversion required for brake tuning
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9P161530
The product you are viewing cross references to these numbers
- Porsche Boxster Spyder 718 4.0L (420 Bhp)
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
- Porsche 992.1 Turbo S 3.8L 2020-24
- Porsche 992.1 Turbo Cabriolet 3.8L 2020-24
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
Vented, Perforated, Two-piece floating brake disc, Coated
Outer diameter: 380 mm
Brake Disc Thickness: 30 mm

Not for cars with ceramic brake (PCCB)
Porsche 982SP (718) Boxster Spyder 2019>> - REAR
Porsche 982 (718) Cayman GT4 2019>> - REAR
Porsche 992.1 Carrera GTS - REAR
Porsche 992.1 Carrera 4 GTS - REAR
Porsche 992.1 turbo - REAR
The compound brake disc developed by Zimmermann accommodates the increased demands incurred by engine tuning and optimised chassis structures.
Your advantages:
• Excellent deceleration action and no distortion of friction ring at high temperatures
• Substantial weight saving and therefore less unsprung mass
• Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
• „Hot spots" prevented by optimised design of ventilation channels
• 1:1 exchange of original disc possible
• Not subject to registration: general ABE certification supplied with disc
• No conversion required for brake tuning
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9GT61560
The product you are viewing cross references to these numbers
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Turbo 3.8L 2020-24
- Porsche 992.1 Turbo S 3.8L 2020-24
- Porsche 992.1 Turbo Cabriolet 3.8L 2020-24
- Porsche 992.1 Turbo S Cabriolet 3.8L 2020-24
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L Cabriolet 2024>>
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
Brake Disc Ø: 390mm
Brake Disc Thickness: 32mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Rear Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
Porsche 992.1 Turbo 3.8L 2020-24
Porsche 992.1 Turbo S 3.8L 2020-24
Porsche 992.1 Turbo Cabriolet 3.8L 2020-24
Porsche 992.1 Turbo S Cabriolet 3.8L 2020-24
Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
Porsche 992.2 Carrera 2 GTS 3.6L Cabriolet 2024>>
Porsche 992.2 Carrera 4 GTS 3.6L Cabriolet 2024>>
Porsche Cayman GT4 3.8L 2015-16
Porsche Cayman GT4 718 4.0L
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics. Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Rear Brake Discs offer a premium, precision-engineered solution.
Product Features:
- Carbon ceramic construction for high heat tolerance and fade-resistant braking
- Direct OE replacement fitment for vehicles originally equipped with carbon ceramic systems
- Lightweight design reduces unsprung and rotating mass for quicker response
- Exceptional thermal stability and wear resistance
- Designed for use with OE and compatible aftermarket calipers
- Pairs perfectly with DesignTek CCB-compatible brake pads (recommended)
- Ideal for high-performance road use and track performance driving
Important Fitment & Usage Notes:
- Carbon ceramic discs must be used with CCB-compatible brake pads — not standard iron-disc pads
- Compatible with OE and selected aftermarket calipers that are designed for carbon ceramic use
- Not suitable for use with pads or calipers that aren’t expressly rated for carbon ceramic applications
- Before ordering, please confirm caliper compatibility and pad selection to ensure optimal performance and safety.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040092TCR
The product you are viewing cross references to these numbers
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed