价格匹配保证
全球配送
12 个月保修
旋翼臂/点集
按品牌过滤

代码: 91160293600

产品车辆组
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Information
Contact beaker point for Ignition Distributor no: 91160202103, 91160202703, 91160203105 and 91160203106.

Fits:
Porsche 911 1972-77
Click 'Zoom in' for large parts diagram.
Diagram ref no 8
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91160293600
您正在查看的产品与这些编号存在交叉引用关系

Fits:
Porsche 911 1972-77
Click 'Zoom in' for large parts diagram.
Diagram ref no 8
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91160293600
91160293600
您正在查看的产品与这些编号存在交叉引用关系
价格: €23.46
库存




代码: 91160292801/1

产品车辆组
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Information
Rotor arm 6500 RPM.

Fits:
Porsche 911 2.7L 1974-77
The "rotor" head is attached to the top of the distributor shaft which is driven by a gear on the engine's camshaft and thus synchronized to it. This rotor is pressed against a carbon brush on the centre terminal of the distributor cap which connects to the ignition coil either through the top and wired directly to the coil in HEI systems, or via the centre terminal in points ignition systems and remotely connected to the coil.
The rotor is constructed such that the centre tab is electrically connected to its outer edge so that voltage coming in to the centre post travels through the carbon point to the outer edge of the rotor. As the camshaft rotates, the rotor spins and its outer edge passes each of the internal plug terminals to fire each spark plug.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91160292801
您正在查看的产品与这些编号存在交叉引用关系

Fits:
Porsche 911 2.7L 1974-77
The "rotor" head is attached to the top of the distributor shaft which is driven by a gear on the engine's camshaft and thus synchronized to it. This rotor is pressed against a carbon brush on the centre terminal of the distributor cap which connects to the ignition coil either through the top and wired directly to the coil in HEI systems, or via the centre terminal in points ignition systems and remotely connected to the coil.
The rotor is constructed such that the centre tab is electrically connected to its outer edge so that voltage coming in to the centre post travels through the carbon point to the outer edge of the rotor. As the camshaft rotates, the rotor spins and its outer edge passes each of the internal plug terminals to fire each spark plug.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91160292801
91160292500
91160292800
91160292900
90160292800
1234332198
91160292801
您正在查看的产品与这些编号存在交叉引用关系
€122.85
当前 €117.94
库存




代码: 91160292801/2

产品车辆组
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Information
Rotor arm (6500 RPM).
Fits:
Porsche 911 2.7L 1974-77
The "rotor" head is attached to the top of the distributor shaft which is driven by a gear on the engine's camshaft and thus synchronized to it. This rotor is pressed against a carbon brush on the centre terminal of the distributor cap which connects to the ignition coil either through the top and wired directly to the coil in HEI systems, or via the centre terminal in points ignition systems and remotely connected to the coil.
The rotor is constructed such that the centre tab is electrically connected to its outer edge so that voltage coming in to the centre post travels through the carbon point to the outer edge of the rotor. As the camshaft rotates, the rotor spins and its outer edge passes each of the internal plug terminals to fire each spark plug.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91160292801
您正在查看的产品与这些编号存在交叉引用关系

Fits:
Porsche 911 2.7L 1974-77
The "rotor" head is attached to the top of the distributor shaft which is driven by a gear on the engine's camshaft and thus synchronized to it. This rotor is pressed against a carbon brush on the centre terminal of the distributor cap which connects to the ignition coil either through the top and wired directly to the coil in HEI systems, or via the centre terminal in points ignition systems and remotely connected to the coil.
The rotor is constructed such that the centre tab is electrically connected to its outer edge so that voltage coming in to the centre post travels through the carbon point to the outer edge of the rotor. As the camshaft rotates, the rotor spins and its outer edge passes each of the internal plug terminals to fire each spark plug.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91160292801
91160292500
91160292800
91160292900
90160292800
91160292801
您正在查看的产品与这些编号存在交叉引用关系
€38.03
当前 €36.13
库存




代码: 91160292801

产品车辆组
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Information
转子臂(6500 RPM)。

适合:
保时捷 911T/S SPM 1969
保时捷 911T 1970-73
保时捷 911T 1974-77 *适用于分销商 9160202103 / 91160202107
“转子”头安装在分电器轴的顶部,分电器轴由发动机凸轮轴上的齿轮驱动,从而与其同步。该转子压在分电器盖中心端子上的碳刷上,该碳刷通过顶部连接到点火线圈,在 HEI 系统中直接连接到线圈,或者通过点火系统中的中心端子连接到线圈,并远程连接到线圈。
转子的结构使得中心片与其外缘电连接,这样进入中心柱的电压就通过碳点传到转子的外缘。当凸轮轴旋转时,转子旋转,其外缘经过每个内部插头端子,点燃每个火花塞。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91160292801
您正在查看的产品与这些编号存在交叉引用关系

适合:
保时捷 911T/S SPM 1969
保时捷 911T 1970-73
保时捷 911T 1974-77 *适用于分销商 9160202103 / 91160202107
“转子”头安装在分电器轴的顶部,分电器轴由发动机凸轮轴上的齿轮驱动,从而与其同步。该转子压在分电器盖中心端子上的碳刷上,该碳刷通过顶部连接到点火线圈,在 HEI 系统中直接连接到线圈,或者通过点火系统中的中心端子连接到线圈,并远程连接到线圈。
转子的结构使得中心片与其外缘电连接,这样进入中心柱的电压就通过碳点传到转子的外缘。当凸轮轴旋转时,转子旋转,其外缘经过每个内部插头端子,点燃每个火花塞。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91160292801
91160292500
91160292800
91160292900
90160292800
91160292801
您正在查看的产品与这些编号存在交叉引用关系
价格: €61.95
库存




代码: 91160293000
产品车辆组
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Information
Rotor Arm
or 
Fits:
Porsche 911 3.0L Carrera 1974-77 200Bhp Cars
The "rotor" head is attached to the top of the distributor shaft which is driven by a gear on the engine's camshaft and thus synchronized to it. This rotor is pressed against a carbon brush on the center terminal of the distributor cap which connects to the ignition coil either through the top and wired directly to the coil in HEI systems, or via the center terminal in points ignition systems and remotely connected to the coil.
The rotor is constructed such that the center tab is electrically connected to its outer edge so that voltage coming in to the center post travels through the carbon point to the outer edge of the rotor. As the camshaft rotates, the rotor spins and its outer edge passes each of the internal plug terminals to fire each spark plug.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91160293000
您正在查看的产品与这些编号存在交叉引用关系


Fits:
Porsche 911 3.0L Carrera 1974-77 200Bhp Cars
The "rotor" head is attached to the top of the distributor shaft which is driven by a gear on the engine's camshaft and thus synchronized to it. This rotor is pressed against a carbon brush on the center terminal of the distributor cap which connects to the ignition coil either through the top and wired directly to the coil in HEI systems, or via the center terminal in points ignition systems and remotely connected to the coil.
The rotor is constructed such that the center tab is electrically connected to its outer edge so that voltage coming in to the center post travels through the carbon point to the outer edge of the rotor. As the camshaft rotates, the rotor spins and its outer edge passes each of the internal plug terminals to fire each spark plug.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91160293000
91160293000
您正在查看的产品与这些编号存在交叉引用关系
价格低至: €27.60




代码: 91160292900

产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Information
Rotor arm (7300 rpm)

Fits:
Porsche 911 S 1965-77
The "rotor" head is attached to the top of the distributor shaft which is driven by a gear on the engine's camshaft and thus synchronized to it. This rotor is pressed against a carbon brush on the center terminal of the distributor cap which connects to the ignition coil either through the top and wired directly to the coil in HEI systems, or via the center terminal in points ignition systems and remotely connected to the coil.
The rotor is constructed such that the center tab is electrically connected to its outer edge so that voltage coming in to the center post travels through the carbon point to the outer edge of the rotor. As the camshaft rotates, the rotor spins and its outer edge passes each of the internal plug terminals to fire each spark plug.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91160292900
您正在查看的产品与这些编号存在交叉引用关系

Fits:
Porsche 911 S 1965-77
The "rotor" head is attached to the top of the distributor shaft which is driven by a gear on the engine's camshaft and thus synchronized to it. This rotor is pressed against a carbon brush on the center terminal of the distributor cap which connects to the ignition coil either through the top and wired directly to the coil in HEI systems, or via the center terminal in points ignition systems and remotely connected to the coil.
The rotor is constructed such that the center tab is electrically connected to its outer edge so that voltage coming in to the center post travels through the carbon point to the outer edge of the rotor. As the camshaft rotates, the rotor spins and its outer edge passes each of the internal plug terminals to fire each spark plug.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91160292900
91160292900
1234332206
您正在查看的产品与这些编号存在交叉引用关系
价格: €88.25
库存




代码: 91160292900/1

产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Information
Rotor arm (7300 rpm)

Fits:
Porsche 911 S 1965-77
The "rotor" head is attached to the top of the distributor shaft which is driven by a gear on the engine's camshaft and thus synchronized to it. This rotor is pressed against a carbon brush on the center terminal of the distributor cap which connects to the ignition coil either through the top and wired directly to the coil in HEI systems, or via the centre terminal in points ignition systems and remotely connected to the coil.
The rotor is constructed such that the centre tab is electrically connected to its outer edge so that voltage coming in to the centre post travels through the carbon point to the outer edge of the rotor. As the camshaft rotates, the rotor spins and its outer edge passes each of the internal plug terminals to fire each spark plug.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91160292900
您正在查看的产品与这些编号存在交叉引用关系

Fits:
Porsche 911 S 1965-77
The "rotor" head is attached to the top of the distributor shaft which is driven by a gear on the engine's camshaft and thus synchronized to it. This rotor is pressed against a carbon brush on the center terminal of the distributor cap which connects to the ignition coil either through the top and wired directly to the coil in HEI systems, or via the centre terminal in points ignition systems and remotely connected to the coil.
The rotor is constructed such that the centre tab is electrically connected to its outer edge so that voltage coming in to the centre post travels through the carbon point to the outer edge of the rotor. As the camshaft rotates, the rotor spins and its outer edge passes each of the internal plug terminals to fire each spark plug.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91160292900
91160292900
1234332206
您正在查看的产品与这些编号存在交叉引用关系
€76.05
当前 €73.01
库存



显示从1到7(共7个产品)
也可在这些页面找到
您可能也喜欢
流行车型