Track rod. Porsche 924S / 944 - 94434703329
94434703329/2
产品车辆组
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 Turbo 2.5L 8V 1985-88
Information
Track rod. Porsche 924S / 944
Fits:
Porsche 924s Cars with Power Steering
Porsche 944 upto 1986 Cars with Power Steering
The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.
Price is for each
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
94434703329
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 924s Cars with Power Steering
Porsche 944 upto 1986 Cars with Power Steering
The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.
Price is for each
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
94434703329
94434703320
1209401
94434703329
您正在查看的产品与这些编号存在交叉引用关系
€80.73
当前 €76.69
库存
安全购物
12 个月保修
全球交付
相关产品
Racing bump steer kit. Porsche 911 / 930 / 914 / 912
代码: 211090
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
- Porsche 912E 4CYL 1976
Information
Spring plate bush kit
1 kit required per car
Fits
Porsche 911 - 1965 to 1989
Porsche 930 turbo - 1975 to 1989
Porsche 914 - 1970 to 1976
Porsche 912 - 1976 to 1976
Precision Steering Under Pressure
Our top-performing bump steer solution is super strong and provides the sharpest, most predictable steering response. It eliminates steering knuckle twist induced toe steer and can be used on raised spindles of any height.
Double steering knuckle – Holds tie rod end between two steering knuckles to eliminate knuckle flex regardless of bump steer spacer length.
Long bump steer spacers (required with raised spindles) place bending loads that twist stock steering knuckles. Twist causes undesired toe steer.
Second steering knuckle is welded to the strut body
Bump steer adjustable – allows massive bump steer adjustment range in .125 inch increments. Double shear mounting provides solid support for even the longest bump steer spacing.
Rod End – Weather sealed precision rods ends included work with regular turbo tie rods. Included boots to seal out dirt and and water for extended life.
Our purpose-made rod ends are extra long to ensure proper threaded engagement with standard turbo tie rods
Spindle height – Kits available for 19mm, 30mm, 40mm spindle height.
Kits are easily modified for use with essentially any spindle height.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
211090
您正在查看的产品与这些编号存在交叉引用关系
1 kit required per car
Fits
Porsche 911 - 1965 to 1989
Porsche 930 turbo - 1975 to 1989
Porsche 914 - 1970 to 1976
Porsche 912 - 1976 to 1976
Precision Steering Under Pressure
Our top-performing bump steer solution is super strong and provides the sharpest, most predictable steering response. It eliminates steering knuckle twist induced toe steer and can be used on raised spindles of any height.
Double steering knuckle – Holds tie rod end between two steering knuckles to eliminate knuckle flex regardless of bump steer spacer length.
Long bump steer spacers (required with raised spindles) place bending loads that twist stock steering knuckles. Twist causes undesired toe steer.
Second steering knuckle is welded to the strut body
Bump steer adjustable – allows massive bump steer adjustment range in .125 inch increments. Double shear mounting provides solid support for even the longest bump steer spacing.
Rod End – Weather sealed precision rods ends included work with regular turbo tie rods. Included boots to seal out dirt and and water for extended life.
Our purpose-made rod ends are extra long to ensure proper threaded engagement with standard turbo tie rods
Spindle height – Kits available for 19mm, 30mm, 40mm spindle height.
Kits are easily modified for use with essentially any spindle height.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
211090
2110902
2110903
2110904
91134703100
91134703100
91134732204
93034732200
93034703101
您正在查看的产品与这些编号存在交叉引用关系
价格低至: €445.71
安全购物
12 个月保修
全球交付
螺栓固定式可调式转向套件。保时捷 911 / 930 / 914 / 912 / 944
代码: 2110901
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 914 (1970-1976)
- Porsche 912E 4CYL 1976
Information
螺栓固定可调式转向缓冲套件
每辆车需要 1 套
#大象赛跑#
适合
保时捷 911 - 1969 年至 1989 年
保时捷 930 Turbo - 1975 年至 1989 年
保时捷 914 - 1970 年至 1976 年
保时捷 912 - 1976 年至 1976 年
保时捷 944 - 1985 年至 1991 年
可调节、螺栓固定且密封
完全可调，以 0.125 英寸为增量，增加 0.5 至 1.25 英寸的间距。
转向节间隙可调——完全可调，间隙范围为0.5英寸至1.25英寸，增量为0.125英寸。轭式垫片可夹紧原厂转向节，增强强度。
杆端– 包含全天候密封的精密杆端，可与常规涡轮拉杆配合使用。橡胶套可有效防止灰尘和水进入，延长杆端使用寿命。
我们特制的杆端特别长，以确保与标准涡轮拉杆正确螺纹啮合
主轴高度– 适用于从库存到 19 毫米的主轴高度。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
2110901
您正在查看的产品与这些编号存在交叉引用关系
每辆车需要 1 套
#大象赛跑#
适合
保时捷 911 - 1969 年至 1989 年
保时捷 930 Turbo - 1975 年至 1989 年
保时捷 914 - 1970 年至 1976 年
保时捷 912 - 1976 年至 1976 年
保时捷 944 - 1985 年至 1991 年
可调节、螺栓固定且密封
完全可调，以 0.125 英寸为增量，增加 0.5 至 1.25 英寸的间距。
转向节间隙可调——完全可调，间隙范围为0.5英寸至1.25英寸，增量为0.125英寸。轭式垫片可夹紧原厂转向节，增强强度。
杆端– 包含全天候密封的精密杆端，可与常规涡轮拉杆配合使用。橡胶套可有效防止灰尘和水进入，延长杆端使用寿命。
我们特制的杆端特别长，以确保与标准涡轮拉杆正确螺纹啮合
主轴高度– 适用于从库存到 19 毫米的主轴高度。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
2110901
2110901
91134703100
91134703100
91134732204
93034732200
93034703101
94434733301
94434733305
您正在查看的产品与这些编号存在交叉引用关系
€479.70
当前 €455.71
由供应商供货
安全购物
12 个月保修
全球交付
涡轮转向横拉杆端部凸块转向套件适用于保时捷 911 / 912 / 930 / 914
代码: 93034732200/3
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
- Porsche 912E 4CYL 1976
Information
涡轮转向杆端部碰撞转向套件。
成套出售 - 每辆车需要 1 套
适合
保时捷 911 / 930 涡轮增压 1965-89
保时捷 912 1965-69
保时捷 914 1970-76
降低30mm
橡胶靴已安装在外壳中 - 该部件已防尘防水，因此无需额外的靴子。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
93034732200
您正在查看的产品与这些编号存在交叉引用关系
成套出售 - 每辆车需要 1 套
适合
保时捷 911 / 930 涡轮增压 1965-89
保时捷 912 1965-69
保时捷 914 1970-76
降低30mm
橡胶靴已安装在外壳中 - 该部件已防尘防水，因此无需额外的靴子。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
93034732200
93034732200
93034703101
您正在查看的产品与这些编号存在交叉引用关系
€239.85
当前 €227.86
库存
安全购物
12 个月保修
全球交付