请稍候… 
我们正在处理您的订单，请稍候
请不要按返回按钮…
请不要按返回按钮…
在此输入您的增值税号，然后单击验证：
您的详细信息已经过验证。增值税号注册至：
,
。
现在，您的订单的增值税税率为零。我们保留在您提出订单请求后验证这些详细信息的权利，并在需要时恢复增值税。
您的增值税详细信息无法识别或无效。您的增值税号必须与上面指定的帐单国家/地区相匹配。当前指定为 。您无需输入增值税号的国家/地区代码部分，因为已在上面的帐单地址详细信息中选择了该部分。
增值税号查询服务目前已离线。请在下面的评论或特殊说明字段中提供您的增值税详细信息，我们将在您提出订单请求后应用增值税折扣。
Category Filter
适用于保时捷 911 的带行程测量的上止点指示器 - SR09
SR09
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
适用于保时捷 911 的带行程测量的上止点指示器
对于无需使用我们“死点式”上止点指示器 (SR022/23) 的发动机，您可以使用我们易于使用、高精度的带行程计的上止点指示器来测量活塞的精确位置。这些指示器采用 6061 铝合金精密制造，并经过硬质涂层处理以增强耐磨性，同时配备经 ASME/ANSI 认证的行程计，确保了其卓越的精度。不建议将其用于风冷 911 车型的半球形缸盖上。
适用于 10 毫米、12 毫米或 14 毫米火花塞孔。
单独出售。
对于无需使用我们“死点式”上止点指示器 (SR022/23) 的发动机，您可以使用我们易于使用、高精度的带行程计的上止点指示器来测量活塞的精确位置。这些指示器采用 6061 铝合金精密制造，并经过硬质涂层处理以增强耐磨性，同时配备经 ASME/ANSI 认证的行程计，确保了其卓越的精度。不建议将其用于风冷 911 车型的半球形缸盖上。
适用于 10 毫米、12 毫米或 14 毫米火花塞孔。
单独出售。
价格低至: €280.36
相关产品
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MK1 GT2 2007-09
Information
Stomski Racing SR124 Engine case splitter for Porsche 911
No more hammering, chiseling, swearing, heating, prying or praying to get an 911 engine case apart. STOMSKI RACING'S SR124 ELEGANTLY and GENTLY separates the engine case halves and not only shortens the process of engine tear-down, but it also protects what doubtlessly is an expensive asset- the engine case itself. The rare #s matching early 911S sand-cast aluminum case, or the impossible to find 911 GT3 RSR case, or the early magnesium case that seems so fragile, all can NOW be protected from the threat of the block of wood and lead hammer, or the torch, or the pry-bar and chisel.
SR124 includes a CNC precision machined aluminum platform that you bolt to four head studs (ideally over #2 or #5) using the included thumbscrews. An over-sized drive-screw (stainless steel) is then threaded through the platform to mate with a high-load bearing in our specially designed rod cap that presses against the wrist pin of #2 or #5 connecting rod that is at bottom-dead-center. As you slowly use a wrench or ratchet to tighten the drive-screw, the torque of the SR124 splitter is evenly distributed through the entire crankshaft, pressing against ALL 8 main bearings. Once the slack is taken up, only GENTLE effort on the drive screw is required to split even the most belligerent of cases.
The SR124 platform is designed to work on all Mezger 911s (2.0 through 997) and includes Delrin inserts/sleeves that protect the head studs from scratches or dings.
No more hammering, chiseling, swearing, heating, prying or praying to get an 911 engine case apart. STOMSKI RACING'S SR124 ELEGANTLY and GENTLY separates the engine case halves and not only shortens the process of engine tear-down, but it also protects what doubtlessly is an expensive asset- the engine case itself. The rare #s matching early 911S sand-cast aluminum case, or the impossible to find 911 GT3 RSR case, or the early magnesium case that seems so fragile, all can NOW be protected from the threat of the block of wood and lead hammer, or the torch, or the pry-bar and chisel.
SR124 includes a CNC precision machined aluminum platform that you bolt to four head studs (ideally over #2 or #5) using the included thumbscrews. An over-sized drive-screw (stainless steel) is then threaded through the platform to mate with a high-load bearing in our specially designed rod cap that presses against the wrist pin of #2 or #5 connecting rod that is at bottom-dead-center. As you slowly use a wrench or ratchet to tighten the drive-screw, the torque of the SR124 splitter is evenly distributed through the entire crankshaft, pressing against ALL 8 main bearings. Once the slack is taken up, only GENTLE effort on the drive screw is required to split even the most belligerent of cases.
The SR124 platform is designed to work on all Mezger 911s (2.0 through 997) and includes Delrin inserts/sleeves that protect the head studs from scratches or dings.
价格: €416.02
由供应商供货
产品车辆组
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 / GT3 RS 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche 997 MKII GT2 RS 2011-13
Information
Stomski Racing 正时链条固定带/支架用于在保时捷 911 曲轴箱组装过程中固定链条。提供两种型号：SR222 适用于所有 911 发动机，SR222-GT3 适用于 996/997 GT2、GT3 和 TT 发动机。单独出售。
适用：
- 保时捷 996 C2 3.4L 1997-08/01
- 保时捷 996 C4 3.4L 1997-08/01
- 保时捷 996 C2 3.6L 09/01-2005
- 保时捷 996 C4 3.6L 09/01-2005
- 保时捷 996 C4S 3.6L 09/01-2005
- 保时捷 996 TURBO 2000-05
- 保时捷 996 GT2 2001-05
- 保时捷 996 GT3 MKI 1999-02
- 保时捷 996 GT3 MKII 2003>>
- 保时捷 996 GT3 RS 2003-04
- 保时捷 997 MK1 卡雷拉 2 3.6L 2005-08
- 保时捷 997 MK1 卡雷拉 2S 3.8L 2005-08
- 保时捷 997 MK1 卡雷拉 4 3.6L 2005-08
- 保时捷 997 MK1 卡雷拉 4S 3.8L 2005-08
- 保时捷 997 MK1 TURBO 2007-09
- 保时捷 997 MK1 GT3 / GT3 RS 2007-09
- 保时捷 997 MK1 GT2 2007-09
- 保时捷 997 MKII 卡雷拉 C2 3.6L 2009-12
- 保时捷 997 MKII 卡雷拉 C4 3.6L 2009-12
- 保时捷 997 MKII Carrera C2S 3.8L 2009-12
- 保时捷 997 MKII Carrera C4S 3.8L 2009-12
- 保时捷 997 MKII GT3 / GT3 RS 2010-11
- 保时捷 997 MKII Turbo 2010-13
- 保时捷 997 MKII GT2 RS 2011-13
适用于 911 / 964 / 993 发动机的 SR222。
订购前请确认配件是否适用于您的具体车辆（型号、年份、发动机）。
本产品的功能
这款车间工具用于在曲轴箱各部分组装时支撑正时链条。它的长度、弧形轮廓和张力均经过精心设计，旨在辅助组装操作；它并非替换正时链条或链条张紧器。
函数
在发动机组装过程中支撑链条。
帮助曲轴箱各部分在链条的支撑下连接在一起。
技术细节
制造商：Stomski Racing。
结构：钢结构。
版本：SR222 和 SR222-GT3，尺寸不同，适用于其指定的发动机应用。
数量：单个出售。
价格: €85.01
库存
产品车辆组
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII GT3 / GT3 RS 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche 997 MKII GT2 RS 2011-13
Information
Cylinder press for Porsche 996/997 GT3
Here is the ultimate tool to press the cylinders in and out of the water jacket on GT3, Turbo, and RS/RSR 996/997 engines.
This kit includes everything you need to safely, accurately, quickly, and conveniently perform this critical task.
Each kit contains:
• ring compressor (1 @102.7)*,
• Delrin cylinder spacers (4),
• complete stainless steel/AL press,
• aluminum cylinder bushing,
• bolts, and a sturdy storage case.
*100mm ring compressor (1) available separately.
Here is the ultimate tool to press the cylinders in and out of the water jacket on GT3, Turbo, and RS/RSR 996/997 engines.
This kit includes everything you need to safely, accurately, quickly, and conveniently perform this critical task.
Each kit contains:
• ring compressor (1 @102.7)*,
• Delrin cylinder spacers (4),
• complete stainless steel/AL press,
• aluminum cylinder bushing,
• bolts, and a sturdy storage case.
*100mm ring compressor (1) available separately.
价格: €985.80
由供应商供货