请不要按返回按钮…
在此输入您的增值税号，然后单击验证：
您的详细信息已经过验证。增值税号注册至：
,
。
现在，您的订单的增值税税率为零。我们保留在您提出订单请求后验证这些详细信息的权利，并在需要时恢复增值税。
您的增值税详细信息无法识别或无效。您的增值税号必须与上面指定的帐单国家/地区相匹配。当前指定为 。您无需输入增值税号的国家/地区代码部分，因为已在上面的帐单地址详细信息中选择了该部分。
增值税号查询服务目前已离线。请在下面的评论或特殊说明字段中提供您的增值税详细信息，我们将在您提出订单请求后应用增值税折扣。
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911 1967-73 LHD Cars
For cars WITHOUT heater or A/C unit in the smugglers box
Do you find the steering in your 911 too heavy whilst parking or taking hairpin turns? Have you fitted wider tires, a smaller diameter steering wheel or a more direct steering rack? This is the solution, a speed sensitive power steering unit that offers maximum assistance at low speeds and minimum at high speeds, therefore the steering "feel" remains.
Speed sensitive power steering is operated via a mechanical speed sensor fitted between the speedo cable and speedo-head that is supplied in the kit.
It is possible to switch off the system. It is also possible to fit an on/off switch in the ignition switched 15+ thin red cable which will you to switch the system on or off at any time when driving. This will not damage the power steering in any way.
You can connect the blue speed sensor wire to the speedometer, this will reduce the assistance when you drive faster.
If this has been connected and you find the steering too light, you can place a “torque limiter” between the torsion sensor and the ECU which will allow you to adjust the power steering from 100% to nearly 0% to select exactly the amount of assistance you prefer.
Please note: Special Order Product allow 3 - 4 weeks for delivery
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
EZPSKITLHDFNOAC
您正在查看的产品与这些编号存在交叉引用关系
