Additives & Boosters


BG244 will restore performance, improve MPG and reduce emissions.
Regular use of BG244 (approximately every 10,000 miles) will reduce deposit build up in the diesel particulate filter, reducing maintenance costs.
BG 244 for diesel engines.
Designed for all types diesel engine including PD (Unit Injector) and common rail, BG 244 (BG244) quickly and effectively cleans diesel fuel injectors. It smoothes engine idle and helps prevent costly repairs. In only a few short miles of driving, engine response is restored.
One can (325mL) of BG 244 treats up to 60 litres diesel fuel. To maintain fuel system cleanliness and engine performance, add BG 244 to fuel tank at 7,500 to 9,000 mile (12,000?14,500 km) intervals. Catalytic converter, oxygen sensor and diesel particulate filter safe.
This product is perfectly safe for all diesel engines including those with turbo chargers and particulate filter systems.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BG245
The product you are viewing cross references to these numbers





Compression will increase with removal of these deposits. BG109 also lowers exhaust emissions, eliminates oil consumption associated with sludge and other deposit build up and improves overall power and economy. Safe for use in petrol, diesel and rotary engines










Modern operating conditions of a car in the urban cycle (warm-ups, start-stop, short trips, extended intervals between oil changes) and high operating temperatures lead to a rapid depletion of the required additive package in the engine oil. This leads to the accumulation of more unburned fuel and other combustion products in the engine oil, which leads to the rapid oxidation of engine oils. Oxidation causes oil to thicken and deposits in the crankcase, oil filter, oil passages and other critical internal engine surfaces.
BG Advanced Formula MOA® Engine Oil Conditioner is designed to maximize the performance of synthetic and mineral engine oils and extend engine oil life.
The product prevents oxidation and an increase in the viscosity of the engine oil even under high load conditions.
Keeps compression rings, lifters, tensioners and other engine components clean for long engine life and lowers maintenance costs.
Excellent for gasoline engine use.
Compatible with synthetic and mineral motor oils.
Benefits:
increases the strength of the oil film
prevents oxidation and oil thickening
prevents the formation of sludge and varnish deposits when driving in the urban cycle
protects against rust and corrosion
provides increased power and performance
reduces harmful emissions into the atmosphere
Excellent long-term protection of engine parts against wear!
Used by:
Restoring the elasticity of the elements of the oil system of a gasoline engine
Restoring the elasticity of the elements of the oil system of a diesel engine
Engine oil protection
Mode of application:
For continuous engine protection, add one can (325 ml) of 4-5 liters of engine oil at every oil change
Add to the crankcase in the event of a drop in the oil level to enhance its properties between replacements
Do not overfill the crankcase





177 ml
• Reduces temperatures in Transmission,
• Reduces wear,
• Reduces noise in Limited Slip, differentials,
• Improves manual transmission characteristics,
• Reduces maintenance costs,
• Improves water separation,
• Extends oil life





Fuel Additive (Performance Additive)
250ML
Description
High specification diesel fuel treatment for enhanced combustion efficiency and engine cleanliness.
Application
For use in all diesel vehicles including modern Euro IV/V compliant engines. Empty complete contents into fuel tank before filling to ensure thorough mixing. One bottle treats 60 litres of fuel.
User Benefits
• Suitable for all diesel engines, especially Euro IV emission-compliant vehicles.
• Enhanced detergency package for quicker clean up and prolonged injector cleanliness.
• Increases Cetane rating of diesel by up to 5 numbers, which also provides a tangible improvement to vehicle performance.
• Improved combustion and engine cleanliness drastically reduces emissions of hydrocarbons (HC) and carbon dioxide.
Typical Characteristics:
- Specific Gravity (at 15°C) - 0.84
- Kinematic Viscosity (at 40°C, cSt)- 2.5
- Flash Point - 75°C
- Colour Appearance Odour - Pale Brown





Fuel Additive (Performance Additive)
250ML
Description
An octane booster and detergent package adding 3 octane numbers to unleaded fuel.
Application
For use in all petrol engined vehicles. Add the contents of the bottle to 60 litres of petrol.
User Benefits
• Increases octane rating of fuel by up to 3 numbers. Increases power and mpg. Improved efficiency and cleanliness of petrol injectors
• Better cleanliness of carburettor internal components and jets. Improved inlet manifold and valve cleanliness condition. Reduces combustion chamber deposits
• Helps to control corrosion in the fuel system. Maintains catalyst efficiency and helps to invigorate catalytic convertors. Improved combustion and engine cleanliness drastically reduces emissions of hydrocarbon (HC), carbon dioxide (CO2 ) and nitrous oxide (NOx)
• Ideal for use as a pre-MOT test clean-up treatment
Typical Characteristics:
- Specific Gravity (at 15°C) - 0.84
- Kinematic Viscosity (at 40°C, cSt) - 2.5
- Flash Point - 6.6°C
- Colour Appearance Odour - Pale Brown





Fuel Additive (Performance Additive)
500ml
Description
An octane booster and detergent package adding 2 octane numbers to unleaded fuel.
Application
For use in all petrol engines. By addition to fuel in the ratio 1 part to 1000 parts (1ml/l).
User Benefits
• Increases octane rating of fuel by 2 numbers. Improved efficiency and cleanliness of petrol injectors and carburettor jets
• Efficient detergent package to clean and maintain �as new conditions� within the engine and fuel system. Reduces combustion chamber deposits and improves inlet manifold and valve cleanliness
• Reduces emissions of hydrocarbons (HC) and carbon dioxide. Maintains catalyst efficiency and may invigorate catalytic convertors
• Tests show sharper performance, smoother running engines and improved fuel consumption
Typical Characteristics:
- Specific Gravity (at 15°C) - 0.943
- Kinematic Viscosity (at 40°C, cSt) - 16.6
- Flash Point - 66°C
- Colour Appearance Odour - Pale Yellow/Orange






MOTUL Engine Flush is suitable for all types of gasoline and diesel engines, whether naturally aspirated or turbocharged, and is compatible with after-treatment systems, regardless of the fuel type.
It effectively cleans deposits and clogging which appear in the engine, allowing the expelled micro-particles to be flushed out during the oil change.
During the cleaning process it provides optimal lubrication, helping to prevent engine wear, reduce fuel consumption and lower emissions.
Easy to use:
Simply add to warm engine oil before each oil change, let the engine idle for about 15 minutes, then drain the oil and replace the oil and oil filter.






Effectively Cleans Dirt and Clogs in the Fuel System
- Performance Restoration: Restores the engine's original power and performance.
- Efficiency: Reduces fuel consumption and lowers exhaust emissions.
- Universal Compatibility: Suitable for all types of gasoline engines.
Description:
MOTUL Fuel Injector Cleaner Gasoline is a powerful curative additive formulated for use in all types of gasoline engines, whether equipped with injection systems or carburetors, naturally aspirated or turbocharged, and with or without a catalytic converter. It is compatible with all gasoline fuels, including leaded, unleaded, LPG, Ethanol, and biofuels, and works seamlessly with E10 fuels (10% Ethanol).
This additive effectively cleans dirt and clogs throughout the fuel system, addressing issues like injector nozzle fouling, condensation, gumming in injectors or carburetors, and deposits in combustion chambers and on inlet valves.
MOTUL Fuel Injector Cleaner Gasoline also ensures excellent lubrication during the cleaning process, preventing removed micro-particles from redepositing.












Increases RON by Up to 2 Points, Enhancing Engine Knock Resistance and Combustion Stability
- Boosts Performance: Improves engine power and enhances driving pleasure.
- Enhanced Start-ups and Acceleration: Provides smoother and more responsive driving.
- Ideal for Low-Quality Fuels and Winter Conditions: Especially recommended for use with lower fuel quality and in colder seasons.
Description:
MOTUL Octane Booster Gasoline is an octane index enhancer designed for all types of gasoline engines, including indirect or direct injection, carbureted, turbocharged, or naturally aspirated, with or without catalytic converters. It is compatible with all gasoline fuels, including leaded, unleaded, LPG, Ethanol, and biofuels. By increasing the octane number (RON – Research Octane Number) by up to 2 points,
MOTUL Octane Booster Gasoline improves combustion, enhances performance, and prevents engine knocking and abnormal combustion events.





Uses combustion enhancer CE+ which helps the fuel to burn more completely reducing CO2 emissions and diesel noise. It helps the engine to run more smoothly, increasing acceleration and reducing black smoke.
Benefits & Features:
• Cleans injectors and restores spray pattern
• Improves the ignition quality and combustion of diesel fuel
• Facilitates cold starting
• Reduces diesel knocking noises and soot particulates
• Cleaner fuel reduces black exhaust smoke
• Cleans and protects the entire fuel system against rust and corrosion
• Prevents fouling of the fuel filter
• Recommended for all diesel engines with or without a turbo charger
• Lubricates pumps and injectors and compensates for the reduced lubrication of low sulphur diesel
Directions of use:
Pour contents of bottle into fuel tank then fill tank with fuel. For best results use at each tank fill or monthly intervals. This product will not harm engine fuel if overdosed.





An iron based organometallic additive for all diesels fitted with a Diesel Particulate Filter. It aids filter regeneration by lowering the combustion temperature of soot deposits. This extends filter life, lowers soot emissions and improves performance.
Benefits & Features:
• Clears and regenerates blocked soot filters without dismantling
• Complete burn-off of soot particles during driving
• Avoids frequent maintenance costs related to the manual regeneration of the blocked soot filter
• Especially suited for city driving cycles
• Can be used in combination with built-in regeneration systems
• Ultra-fast result
Directions of use:
Pour contents of bottle into fuel tank then fill tank with fuel as normal. For best results use at every vehicle service.





Is a specially formulated oil additive for petrol and diesel engines. It lubricates the valves as well as helping to remove deposits that cause noise and effect engine efficiency.
Benefits & Features:
• Suitable for petrol and diesel engines
• Restores efficient working of hydraulic valve lifters
• Lubricates and releases sticking valves
• Reduces valve train noise
• Restores lost power
• Is safe for use with catalytic converters and turbochargers
• 100% oil soluble - contains no solid particles
• Compatible with mineral and synthetic engine oils
Directions of use:
Pour contents of bottle into the engine oil when engine is warm. For best results use at every vehicle service.





Effectively finds and seals leaks in the radiator and cooling system. The formulation remains active, preventing future leaks and build-up of rust and corrosion. Seals all leaks in coolant system; Radiator, Heater Matrix, Core Plugs, Thermostat Housings and more.
Benefits & Features:
• Stops radiator and cooling leaks
• Seals existing & prevents future leaks
• Conditions cooling system
• Inhibits rust and corrosion
• Lubricates water pump seal
• Helps prevent clogging
Directions of use:
Run the engine to warm the coolant system. After shaking the bottle well, pour the contents into the radiator. Run the engine for a few minutes to allow the system to circulate & seal leaks. Top up the coolant if required. Treats a cooling system of up to 12 litres.


