Price Match Guarantee
Worldwide Delivery
12 Month Warranty
Shock Absorber Parts REAR
Refine by Car Type
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster Spyder 3.8L 2016
Filter by brand
Rear Suspension Overhaul Kit - Shock Absorbers, Springs, Mounts & Hardware - for Porsche 986 Boxster 2.5L/2.7L 1997-2002
Code: SUSPENSIONKIT986-RR
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
Information
Refresh your 986 Boxster's rear suspension with this comprehensive kit, including new standard replacement shock absorbers, coil springs, top mounts, dust covers, bump stops, and essential fasteners.
Suitable for all 986 Boxster 2.5L / 2.7L models with a 5-speed manual transmission, excluding those with sports suspension (PR 030).
Porsche 986 Boxster 2.5L 1997-99
Porsche 986 Boxster 2.7L 2000-02
Kit Contents:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SUSPENSIONKIT986-RR
The product you are viewing cross references to these numbers
Suitable for all 986 Boxster 2.5L / 2.7L models with a 5-speed manual transmission, excluding those with sports suspension (PR 030).
Porsche 986 Boxster 2.5L 1997-99
Porsche 986 Boxster 2.7L 2000-02
Kit Contents:
2x OE Match Shock Absorbers (Standard Replacement)
2x OE Match Top Mounts
6x OE Match M8 Lock Nuts for Top Mounts
2x OE Match Shock Absorber Compensating Plates (3mm)
4x OE Match Upper & Lower Stop Plates / Washers
2x OE Match Coil Springs (Standard Replacement)
1x OE Match Bump Stop & Dust Cover Kit
2x OE Match M14 x 1.5 Nuts for Shock Absorbers
2x Genuine Porsche Shock Absorber Compensating Plates (6mm)
2x Genuine Porsche Coil Spring Support Rings
2x Genuine Porsche Seal Rings for Top Mounts
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SUSPENSIONKIT986-RR
98633330101
98633350501
98633305104
98633305106
98633305120
98633353104504
98633305903
98633305904
98633305906
98733305900
98633328501
98633350402
99634310702
99634310703
98633350902
98633350403
90038001209
90038001201
PAF912799
PAF103353
90038000509
90038000501
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Shock Absorber Rear. Porsche 986 BOXSTER 1997-2000 Cars WITHOUT Sport Suspension 98633305120 (98633305120/1
2 x Rear Coil Spring for Porsche 986 Boxster 2.5L / 2.7L (5-Speed Manual / Without Sports Suspension) 1997-2002 (98633353104504/1
1 x Shock absorber bump stops and dust covers. Porsche 986 / 987 / 987C (98633350501/2
2 x Compensating plate. Porsche 986 Boxster / 987 Boxster / 987C Cayman (98633350402/1
2 x Compensating plate. Porsche 986 Boxster / 987 Boxster / 987C Cayman (98633350403
2 x Shock Absorber Ring. Porsche 986 / 987 / 987C (98633350902
2 x Shock Absorber Sealing Ring Porsche 986 Boxster (98633328501
2 x Shock absorber supporting mount rear. Porsche Boxster / Cayman (98733305900/2
6 x Exhaust hexagon nut. Porsche 996 / 997 (90038000501/1
4 x Shock absorber stop disk. Porsche 986 Boxster / 996 (99634310703/1
Price: €797.49
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Shock Absorber Mounting Overhaul Kit REAR Porsche 986 Boxster
Code: SUSPENSIONKIT14
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
Information
Shock Absorber Mounting Overhaul Kit REAR
Price is for EACH SIDE so for both sides you will need to order 2 kits. Please also add top mounts if you required them
Including shock absorber Bellow, Bump Stop, supporting plate, Compensating plate, Washers & Nut.
Fits:
Porsche 986 Boxster 1997-04
Parts Diagram ref No's 3, 4, 5, 7, 8, 9, 10.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SUSPENSIONKIT14
The product you are viewing cross references to these numbers
Price is for EACH SIDE so for both sides you will need to order 2 kits. Please also add top mounts if you required them
Including shock absorber Bellow, Bump Stop, supporting plate, Compensating plate, Washers & Nut.
Fits:
Porsche 986 Boxster 1997-04
Parts Diagram ref No's 3, 4, 5, 7, 8, 9, 10.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SUSPENSIONKIT14
90038001201
99634310703
9863328501
9863350902
98633350402
98733350400
98633350403
98633330101
98633350501
PAF103353
98633328501
98633350902
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Shock absorber hexagon nut. Porsche 996 / 997 / Boxster / Cayman (PAF103353
2 x Shock Absorber Stop Disk. Porsche 986 Boxster / 996 Genuine Porsche (99634310703
1 x Shock Absorber Sealing Ring Porsche 986 Boxster (98633328501
1 x Shock Absorber Ring. Porsche 986 / 987 / 987C (98633350902
1 x Compensating Plate. Porsche 986 Boxster / 987 Boxster / 987C Cayman (98633350402
1 x Compensating plate. Porsche 986 Boxster / 987 Boxster / 987C Cayman (98633350403
1 x Shock absorber additional spring. Porsche 986 Boxster / 987 Boxster (98633330101
1 x Shock Absorber Rear Bellow. Porsche 986 / 987 / 987C (98633350501
Price: €309.67
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Shock Absorber Mounting Overhaul Kit REAR Porsche 986 Boxster
Code: SUSPENSIONKIT14X
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
Information
Shock Absorber Mounting Overhaul Kit REAR
Price is for BOTH SIDES
Please also add top mounts if you required them
Including shock absorber Bellow, Bump Stop, supporting plate, Compensating plate, Washers & Nut.
Fits:
Porsche 986 Boxster 1997-04
Parts Diagram ref No's 3, 4, 5, 7, 8, 9, 10.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SUSPENSIONKIT14X
The product you are viewing cross references to these numbers
Price is for BOTH SIDES
Please also add top mounts if you required them
Including shock absorber Bellow, Bump Stop, supporting plate, Compensating plate, Washers & Nut.
Fits:
Porsche 986 Boxster 1997-04
Parts Diagram ref No's 3, 4, 5, 7, 8, 9, 10.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SUSPENSIONKIT14X
90038001201
99634310703
9863328501
9863350902
98633350402
98733350400
98633350403
98633330101
98633350501
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Shock absorber hexagon nut. Porsche 996 / 997 / Boxster / Cayman (PAF103353
4 x Shock absorber stop disk. Porsche 986 Boxster / 996 (99634310703/1
2 x Shock Absorber Sealing Ring Porsche 986 Boxster (98633328501
2 x Shock Absorber Ring. Porsche 986 / 987 / 987C (98633350902
2 x Compensating Plate. Porsche 986 Boxster / 987 Boxster / 987C Cayman (98633350402
2 x Compensating plate. Porsche 986 Boxster / 987 Boxster / 987C Cayman (98633350403
1 x Shock absorber bump stops and dust covers. Porsche 986 / 987 / 987C (98633350501/2
€363.53
Now €345.35
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Shock absorber supporting mounts rear. Porsche Boxster / Cayman
Code: 98733305900/2KIT
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Information
Shock absorber supporting mounts, rear.
SET OF 2
Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster MKI & MKII 2005>>
Porsche 987C Cayman MKI & MKII 2005>>
Click 'Zoom in' for large parts diagram.
Diagram ref no 2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98733305900
The product you are viewing cross references to these numbers
SET OF 2
Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster MKI & MKII 2005>>
Porsche 987C Cayman MKI & MKII 2005>>
Click 'Zoom in' for large parts diagram.
Diagram ref no 2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98733305900
12-272365
987-333-059-00
98633305903
98633305904
98633305906
48726
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Shock absorber supporting mount rear. Porsche Boxster / Cayman (98733305900/2
€107.10
Now €101.74
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Compensating plate / Spring support. Porsche 986 Boxster 98633350405
Code: 98633350405
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
Information
Compensating plate / Spring support
Rear
Fits:
Porsche 986 Boxster 1997-04
Click 'Zoom in' for large parts diagram.
Diagram ref no 3
Rear
Fits:
Porsche 986 Boxster 1997-04
Click 'Zoom in' for large parts diagram.
Diagram ref no 3
Price: €19.68
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Compensating Plate. Porsche 986 Boxster / 987 Boxster / 987C Cayman
Code: 98633350402
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
Information
Compensating Plate. 3 mm
Rear
Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-08
Porsche 987C Cayman 2005-08
Click 'Zoom in' for large parts diagram.
Diagram ref no 3
Old Porsche part numbers:
- 98633350402
- 98733350400
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98633350402
The product you are viewing cross references to these numbers
Rear
Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-08
Porsche 987C Cayman 2005-08
Click 'Zoom in' for large parts diagram.
Diagram ref no 3
Old Porsche part numbers:
- 98633350402
- 98733350400
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98633350402
98633350402
The product you are viewing cross references to these numbers
Price: €45.82
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Compensating plate. Porsche 986 Boxster / 987 Boxster / 987C Cayman
Code: 98633350402/1
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
Information
Compensating plate. 3 mm
Rear
Fits:
Porsche 986 Boxster 1997-04
Porsche 987.1 Boxster 2005-08
Porsche 987C.1 Cayman 2005-08
Click 'Zoom in' for large parts diagram.
Diagram ref no 3
Old Porsche part numbers:
- 98633350402
- 98733350400
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98633350402
The product you are viewing cross references to these numbers
Rear
Fits:
Porsche 986 Boxster 1997-04
Porsche 987.1 Boxster 2005-08
Porsche 987C.1 Cayman 2005-08
Click 'Zoom in' for large parts diagram.
Diagram ref no 3
Old Porsche part numbers:
- 98633350402
- 98733350400
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98633350402
98633350402
The product you are viewing cross references to these numbers
€23.74
Now €22.55
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Compensating plate. Porsche 986 Boxster / 987 Boxster / 987C Cayman
Code: 98633350403
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
Information
Compensating plate. 6 mm
Rear
Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-08
Porsche 987C Cayman 2005-08
Click 'Zoom in' for large parts diagram.
Diagram ref no 3
Size: 6.0mm
Please select below
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98633350403
The product you are viewing cross references to these numbers
Rear
Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-08
Porsche 987C Cayman 2005-08
Click 'Zoom in' for large parts diagram.
Diagram ref no 3
Size: 6.0mm
Please select below
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98633350403
98633350403
The product you are viewing cross references to these numbers
Price: €9.04
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
KYB K-Flex Coil spring REAR. Porsche 986 Boxster 2.5L / 2.7L 96-04
Code: RA7173
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster 986 2.7L 2003-04
Information
KYB K-Flex Coil spring, REAR axle.
for Tiptronic / automatic transmission
Fits:
Tiptronic / automatic transmission
For vehicles without sports suspension
Porsche Boxster (986) 2.5L 1996-99
Porsche Boxster (986) 2.7L 1999-04
Please Note:
The springs are priced / boxed individually.
Role of coil spring:
• Support the vehicles weight and absorb the impact of the road condition
• Increase the life of the shock absorber and other suspension components including tyres
• Together with shock absorbers they make up the vehicles suspension system which keeps the tyres in contact with the road.
Why change Coil Springs?:
• To return the vehicle to the correct ride height
• To maintain tyre contact with the road surface
• To improve road handling
• To improve wheel alignment
• To save money by increasing shock absorber life
When should Coil Springs be changed?
• When broken – always replace in axle pairs
• When fatigued (sagging) – always replace in axle pairs
• Shock absorbers should also be replaced at the same time – always replace in axle pairs.
SPECIFICATION:
• Hot & Cold coiling technology
• Manufactured to ISO 9001 standards
• Shot-peening significantly increases the fatigue life of the spring
• Surface preparation and coating ensures excellent corrosion resistance
• Side load technology (banana springs) available
• Full range of OE design taper wire miniblock technology available (RJ Series). Alternatively, a competitively priced aftermarket constant wire design is available (RX Series)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
RA7173
The product you are viewing cross references to these numbers
for Tiptronic / automatic transmission
Fits:
Tiptronic / automatic transmission
For vehicles without sports suspension
Porsche Boxster (986) 2.5L 1996-99
Porsche Boxster (986) 2.7L 1999-04
Please Note:
The springs are priced / boxed individually.
Role of coil spring:
• Support the vehicles weight and absorb the impact of the road condition
• Increase the life of the shock absorber and other suspension components including tyres
• Together with shock absorbers they make up the vehicles suspension system which keeps the tyres in contact with the road.
Why change Coil Springs?:
• To return the vehicle to the correct ride height
• To maintain tyre contact with the road surface
• To improve road handling
• To improve wheel alignment
• To save money by increasing shock absorber life
When should Coil Springs be changed?
• When broken – always replace in axle pairs
• When fatigued (sagging) – always replace in axle pairs
• Shock absorbers should also be replaced at the same time – always replace in axle pairs.
SPECIFICATION:
• Hot & Cold coiling technology
• Manufactured to ISO 9001 standards
• Shot-peening significantly increases the fatigue life of the spring
• Surface preparation and coating ensures excellent corrosion resistance
• Side load technology (banana springs) available
• Full range of OE design taper wire miniblock technology available (RJ Series). Alternatively, a competitively priced aftermarket constant wire design is available (RX Series)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
RA7173
98633353105504
56110
The product you are viewing cross references to these numbers
€55.93
Now €53.13
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery
Rear Coil Spring Seat/Spacer - 3mm - for Porsche 987-2 Boxster & Cayman 2009-2012
Code: 98733350900
Vehicle Group
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Information
Rear coil spring seat / compensating plate - 3mm.
Sold individually; x2 required per vehicle.
Porsche 987-2 Boxster 2009-12
Porsche 987-2 Cayman 2009-12
Diagram ref. 4.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98733350900
The product you are viewing cross references to these numbers
Sold individually; x2 required per vehicle.
Porsche 987-2 Boxster 2009-12
Porsche 987-2 Cayman 2009-12
Diagram ref. 4.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98733350900
98733350900
The product you are viewing cross references to these numbers
Price: €16.68
Arriving soon
Shop Securely
12 Month Warranty
Worldwide Delivery
Rear Monoball Shock Mount - Set Of 2 for Porsche Boxster 986 / 987
Code: 986RSMT
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
Information
Rear Monoball Shock Mount - Set of 2 for Porsche Boxster 986 / 987
The compliant factory rubber bushing is replaced with a precision Teflon-lined spherical bearing for increased suspension rigidity, quicker steering response, and better handling. The spherical bearing is made to our specific specifications, and will not wear out and rattle like others on the market. The housing is CNC machined from 6061-T6 aluminum billet, providing high-strength, light weight, and a perfect match to the factory mounting surface. The spherical bearing is securely clamped into the billet housing. Other designs use a small retainer ring to trap the bearing in a bore, which could cause annoying rattling and possible failure. The spring load is distributed on the housing, not the monoball, for increased monoball life. These are the only upper mounts on the market that are fully compatible with all factory and aftermarket style upper spring seats.
Precision monoball bearing, positively clamped in position.
CNC machined housings.
No bearing noise.
Spring load distributed on housing.
Fully compatible with factory and aftermarket spring seats.
Fits
Porsche Boxster 986
Porsche Boxster 987
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
986RSMT
The product you are viewing cross references to these numbers
The compliant factory rubber bushing is replaced with a precision Teflon-lined spherical bearing for increased suspension rigidity, quicker steering response, and better handling. The spherical bearing is made to our specific specifications, and will not wear out and rattle like others on the market. The housing is CNC machined from 6061-T6 aluminum billet, providing high-strength, light weight, and a perfect match to the factory mounting surface. The spherical bearing is securely clamped into the billet housing. Other designs use a small retainer ring to trap the bearing in a bore, which could cause annoying rattling and possible failure. The spring load is distributed on the housing, not the monoball, for increased monoball life. These are the only upper mounts on the market that are fully compatible with all factory and aftermarket style upper spring seats.
Precision monoball bearing, positively clamped in position.
CNC machined housings.
No bearing noise.
Spring load distributed on housing.
Fully compatible with factory and aftermarket spring seats.
Fits
Porsche Boxster 986
Porsche Boxster 987
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
986RSMT
986RSMT
98733305900
The product you are viewing cross references to these numbers
€603.33
Now €573.16
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery
Rear Monoball Shock Mount FLAT STYLE. Porsche 986/987/981 Tarett
Code: 98XRSMT
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster Spyder 3.8L 2016
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Information
Rear Monoball Shock Mount. Sold as pair.
FLAT STYLE
Fits:
Porsche 986 / 987 / 981 / 982
The compliant factory rubber bushing is replaced with a precision Teflon-lined spherical bearing for quicker steering and shock response, and increased suspension precision resulting in better handling. The spherical bearing is made to our specific specifications, and will not wear out and rattle like others on the market. The housing is CNC machined from 6061-T6 aluminum billet, providing high strength, light weight, and a perfect match to the factory mounting surface. The spherical bearing is securely clamped into the billet housing. Other designs use a small retainer ring to trap the bearing in a bore, which tend to cause annoying rattling and possible failure.
Available in two styles, domed and flat.
• The domed style is designed to replace the OEM mount and is compatible with any strut designed for use with the OEM mount. This would include Bilstein and KW among others. The spring load is distributed on the housing, not the monoball, for increased monoball life. These are the only upper mounts on the market that are fully compatible with all factory and aftermarket style upper spring seats.
• The flat mounts are designed for use with race style struts that are intended to be used with a flat mount. This would include JRZ, Moton, MCS, and AST among others.
Note: that the two are not interchangeable. Please consult Tarett Engineering if you are unsure which is appropriate for your application.
• Precision monoball bearing, positively clamped in position.
• CNC machined housing.
• No bearing noise.
• Spring load distributed on housing
• Fully compatible with factory and aftermarket spring seats.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98XRSMT
The product you are viewing cross references to these numbers
FLAT STYLE
Fits:
Porsche 986 / 987 / 981 / 982
The compliant factory rubber bushing is replaced with a precision Teflon-lined spherical bearing for quicker steering and shock response, and increased suspension precision resulting in better handling. The spherical bearing is made to our specific specifications, and will not wear out and rattle like others on the market. The housing is CNC machined from 6061-T6 aluminum billet, providing high strength, light weight, and a perfect match to the factory mounting surface. The spherical bearing is securely clamped into the billet housing. Other designs use a small retainer ring to trap the bearing in a bore, which tend to cause annoying rattling and possible failure.
Available in two styles, domed and flat.
• The domed style is designed to replace the OEM mount and is compatible with any strut designed for use with the OEM mount. This would include Bilstein and KW among others. The spring load is distributed on the housing, not the monoball, for increased monoball life. These are the only upper mounts on the market that are fully compatible with all factory and aftermarket style upper spring seats.
• The flat mounts are designed for use with race style struts that are intended to be used with a flat mount. This would include JRZ, Moton, MCS, and AST among others.
Note: that the two are not interchangeable. Please consult Tarett Engineering if you are unsure which is appropriate for your application.
• Precision monoball bearing, positively clamped in position.
• CNC machined housing.
• No bearing noise.
• Spring load distributed on housing
• Fully compatible with factory and aftermarket spring seats.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98XRSMT
981RSMT
98733305900
The product you are viewing cross references to these numbers
€427.21
Now €405.85
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery
Schock absorber Centring ring 3.0mm, Rear axle. Porsche 981/982 Boxster and Cayman
Code: 98133350900
Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster Spyder 3.8L 2016
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Information
Schock absorber centring ring, 3.0mm.
Identification: yellow
Rear axle.
Fits:
Porsche 981 Boxster 2012-16
Porsche 981SP Boxster Spyder 2016
Porsche 981C Cayman 2014-16
Porsche 982 Boxster 2017-21
Porsche 982C Cayman 2017-21
Click 'Zoom in' for large parts diagram.
Diagram ref no 4
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98133350900
The product you are viewing cross references to these numbers
Identification: yellow
Rear axle.
Fits:
Porsche 981 Boxster 2012-16
Porsche 981SP Boxster Spyder 2016
Porsche 981C Cayman 2014-16
Porsche 982 Boxster 2017-21
Porsche 982C Cayman 2017-21
Click 'Zoom in' for large parts diagram.
Diagram ref no 4
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98133350900
98133350900
The product you are viewing cross references to these numbers
Price: €16.42
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Shock absorber additional spring. Porsche 986 Boxster / 987 Boxster
Code: 98633330101
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
Information
Shock absorber additional spring.
Rear axle.
Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005
Click 'Zoom in' for large parts diagram.
Diagram ref no 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98633330101
The product you are viewing cross references to these numbers
Rear axle.
Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005
Click 'Zoom in' for large parts diagram.
Diagram ref no 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98633330101
98633330101
The product you are viewing cross references to these numbers
Price: €46.21
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Shock absorber additional spring. Porsche 986 Boxster / 987 Boxster 98633330101
Code: 98633330101/1
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
Information
Shock absorber additional spring.
Rear axle.
Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005
Click 'Zoom in' for large parts diagram.
Diagram ref no 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98633330101
The product you are viewing cross references to these numbers
Rear axle.
Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005
Click 'Zoom in' for large parts diagram.
Diagram ref no 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98633330101
98633330101
The product you are viewing cross references to these numbers
€11.84
Now €11.25
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Shock Absorber Additional Spring. Porsche 987 Boxster / 987C Cayman
Code: 98733330101
Vehicle Group
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Information
Shock Absorber Additional Spring.
Porsche 987 MKII Boxster 2009>>
Porsche 987C MKII Cayman 2009>>
Click 'Zoom in' for large parts diagram.
Diagram ref no 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98733330101
The product you are viewing cross references to these numbers
Porsche 987 MKII Boxster 2009>>
Porsche 987C MKII Cayman 2009>>
Click 'Zoom in' for large parts diagram.
Diagram ref no 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98733330101
98733330101
The product you are viewing cross references to these numbers
Price: €43.67
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery
Also found on these pages
You may also like
-
Anti Roll Bar
-
Anti Roll Bar Bushes
-
Anti Roll Bar Bracket
-
Drop Links & Bushes FRONT
-
Drop Links & Bushes REAR
-
Shock Absorbers FRONT
-
Shock Absorber Parts FRONT
-
Shock Absorbers REAR
-
Coil Springs FRONT
-
Coil Springs REAR
-
Track Control Arms FRONT
-
Track Control Arm REAR
-
Wheel Bearings & Kits
-
Hub Nut
-
Wishbones & bushes
-
Rear Trailing Arm
-
Cross Member & Parts
-
Duct Spoiler & Air Scoop
-
Wheel Hub / Carrier
-
Side section / Sub frame
-
Porsche Dynamic Chassis Control - PDCC -
-
SuperPro Polyurethane Bushes
-
Powerflex Black Series Bushes
-
Powerflex Polyurethane Bushes
Popular Models
