Replacement for Ceramic Disc

Brake Disc / Rotor Slotted 2-pc FRONT




Fits:
Porsche 996 GT3 MK1 and MK2 with PCCB
Porsche 996 GT2 with PCCB
Porsche 996 GT3
Porsche 996 GT2
Porsche 997.1 GT3 without PCCB
Porsche 997.1 GT2 without PCCB



Kit Contains:
Brake Disc 350MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. 

This product is a special order item, allow 5 - 7 working days for delivery.

PAGID RSC-1 Compound Brake Pads

NEWLY DEVELOPED BRAKE PADS FOR CERAMIC DISCS.

This Product Fits:

Porsche 986 Boxster S 3.2 99-05 Front
Porsche 987 Boxster S 3.2 05>> Front
Porsche 987C Cayman 06>> Front
Porsche 996 3.4/3.6 97-05 Front
Porsche 997 3.6L C2/C4* 05-09 Front
*Not S 3.8L
Porsche 997 3.6L C2/C4* 09>> Front
*Not S 3.8L


Porsche 996 C4S 02-05 Rear
Porsche 996 GT2 02-05 Rear
Porsche 996 GT3 MKI 99-01 Rear
Porsche 996 GT3 / GT3 RS MKII 02-05 Rear
Porsche 996 3.6LTurbo 02-05 Rear
Porsche 997 3.8L C2S/C4S 05-09 Rear

Porsche 718 Boxster 2.0ltr 2016>> [ceramic brakes] REAR
Porsche 718 Boxster T 2.5ltr 2019>> [ceramic brakes] REAR
Porsche 718 Boxster S 2.5ltr 2016>> [ceramic brakes] REAR
Porsche 718 Boxster GTS 2.5ltr 2020>> [ceramic brakes] REAR
Porsche 718 Boxster GTS 4.0ltr 2020>> [ceramic brakes] REAR
Porsche 718 Spyder 4.0ltr 2020>> [ceramic brakes] REAR

Porsche 718 Cayman 2.0ltr 2016>> [ceramic brakes] REAR
Porsche 718 Cayman T 2.5ltr 2019>> [ceramic brakes] REAR
Porsche 718 Cayman S 2.5ltr 2016>> [ceramic brakes] REAR
Porsche 718 Cayman GTS 2.5ltr 2020>> [ceramic brakes] REAR
Porsche 718 Cayman GTS 4.0ltr 2020>> [ceramic brakes] REAR

PAGID Racing RSC compounds are developed to comply with the latest requirements in ceramic composite brake disc technology and meet or surpass all current ecological standards of the automotive industry.

RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage.

• MEDIUM FRICTION COEFFICIENT
• GOOD ALLROUND PERFORMANCE CHARACTERISTICS
• DISC FRIENDLY

APPLICATION RANGE: Race and track day compound for all known types of ceramic brake discs.


Information about Friction vs Temperature


Information about Racing Compound Characteristics

Information about Brake Pad Size

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

E2405RSC1

The product you are viewing cross references to these numbers

NEWLY DEVELOPED BRAKE PADS FOR CERAMIC RACING DISC.

This Product Fits:

Porsche 996 GT3 MKII 02-05 Front
Porsche 996 GT2 02-05 Front
Porsche 997 Turbo 06>> Front
Porsche 997 GT3 06>> Front
Porsche 997 GT3 RS 06>> Front
Porsche Carrera GT 03>> Front

Porsche Carrera GT 03>> Rear


PAGID Racing RSC compounds are developed to comply with the latest requirements in ceramic composite brake disc technology and meet or surpass all current ecological standards of the automotive industry.

RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage.

• MEDIUM FRICTION COEFFICIENT
• GOOD ALLROUND PERFORMANCE CHARACTERISTICS
• DISC FRIENDLY

APPLICATION RANGE: Race and track day compound for all known types of ceramic brake discs.


Information about Friction vs Temperature

Information about Racing Compound Characteristics

Information about Brake Pad Size

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

E2707RSC1

The product you are viewing cross references to these numbers

NEWLY DEVELOPED BRAKE PADS FOR CERAMIC RACING DISC.

This Product Fits:

Porsche 996 GT3 MKII 02-05 Front
Porsche 996 GT2 02-05 Front
Porsche 997 Turbo 06>> Front
Porsche 997 GT3 06>> Front
Porsche 997 GT3 RS 06>> Front
Porsche Carrera GT 03>> Front

Porsche Carrera GT 03>> Rear


PAGID Racing RSC compounds are developed to comply with the latest requirements in ceramic composite brake disc technology and meet or surpass all current ecological standards of the automotive industry.

RSC 3 is a low metallic resin bonded material containing steel fibers. This material is specifically developed for above mentioned applications.

• HIGH FRICTION COEFFICIENT
• EXCELLENT FADE RESISTANCE
• LONG PAD LIFE

APPLICATION RANGE: Special race compound for ceramic discs with low content of fibers in the friction surface for sprint and endurance circuit racing.


Information about Friction vs Temperature

Information about Racing Compound Characteristics

Information about Brake Pad Size

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

E2707RSC3

The product you are viewing cross references to these numbers

RALLY, SPRINT AND STOCK CAR
RACING BRAKE PADS

PAGID RST-4 Compound Brake Pads

This Product Fits:

Porsche 986 Boxster S 3.2 99-05 Front*
Porsche 987 Boxster S 3.2 05>> Front
Porsche 987C Cayman 06>> Front
Porsche 996 3.4/3.6 97-05 Front*
Porsche 997 3.6L C2/C4* 05-09 Front
*Not S 3.8L
Porsche 997 3.6L C2/C4* 09>> Front
*Not S 3.8L


Porsche 996 C4S 02-05 Rear*
Porsche 996 GT2 02-05 Rear*
Porsche 996 GT3 MKI 99-01 Rear*
Porsche 996 GT3 / GT3 RS MKII 02-05 Rear*
Porsche 996 3.6LTurbo 02-05 Rear*
Porsche 997 3.8L C2S/C4S 05-09 Rear
*These cars will require new brake pad sensors 99761267701. Please add them to your basket.

PAGID Racing RST compounds are developed to comply with the latest requirements for rally, sprint and stock car racing. They meet or surpass all current ecological standards of the automotive industry.

RST 4 is a semi metallic resin bonded material containing steel fibers. This material has a medium friction level and high temperature resistance.

• MEDIUM FRICTION COEFFICIENT
• GOOD INITIAL BITE
• MILD PROGRESSIVE TORQUE CURVE
• HIGH HEAT TOLERANCE WITH CONSISTENT FEEL

APPLICATION RANGE: Formula cars and open wheel racing. Rear axle material for Rally (tarmac and gravel) and for all front engine cars. Also used in NASCAR on long ovals.

Information about Friction vs Temperature


Information about Brake Pad Size

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

S2405T04001

The product you are viewing cross references to these numbers

Replacement for CERAMIC Discs - DRILLED
Made of HTCIC (High-Tech-Cast Iron-Carbon)



Characteristics "Drilled":

Drilled brake discs lead off the emerging braking heat faster than undrilled discs because of the high ventilation at the bigger radiation surface.

The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2103121

The product you are viewing cross references to these numbers

Replacement for CERAMIC Discs - WAVE
Made of HTCIC (High-Tech-Cast Iron-Carbon)



Characteristics "WAVE":

Lowest weight and maximum deceleration values because of biggest radiation surface and also optimum brake pad cleaning milling (ursprünglich: vent) make this disc a vantage for motorsport use with varying conditions.

Delivery period: approx. 20 working days

The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2103123

The product you are viewing cross references to these numbers

Replacement for CERAMIC Discs - WET
Made of HTCIC (High-Tech-Cast Iron-Carbon)



Characteristics "WET":

Profiled brake discs disperse the water film from the brake disc surface within fractions of a second and provide a very short response time also in case of pouring rain.

Delivery period: approx. 20 working days

The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2103122

The product you are viewing cross references to these numbers