Price Match Guarantee
Worldwide Delivery
12 Month Warranty
Performance Friction Brakes
Filter by brand
PFC Track & Race Brake Front Pads Porsche 996 C4S, 996TT, 996 GT3 , 997 S
Code: 7818.
Vehicle Group
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
Information
PERFORMANCE FRICTION Fast Road & Race Brake Pads For Porsche 7818 / E2474 / T5110. Replacement OE Part No 99635194912.
This Product Fits:
Porsche 996 C4S 02-05 Front
Porsche 996 GT3 MKI 99-01 Front
Porsche 996 Turbo 02-05 Front
Porsche 997 3.8L C2S/C4S 2005>> Front
Porsche 997 3.8L MK11 C2S/C4S 2009>> Front
Please note: These pads have the clip cut out for the brake sensor but there is no hole drilled in the pad to accept the wire. As this is track and racing pad it is not common practice to fit the sensors. If you insist on fitting the sensors, you will have to drill a hole for the wire to slot in.
The absolute best brakes on the market Performance Friction brakes are the standard of excellence in high-performance vehicles, and street vehicles.
Track days and street upgrades for nearly every make and model are manufactured to meet or exceed OE specifications. Whether you're driving a brand new Porsche or a vintage collectible, we've got the brakes to fit your needs. Design 911 offer a wide range of Performance Friction brake pads for all Porsche models from 1970-2010, also in the program are a range of Two-piece floating street upgrade disc and replacement steel disc for cars with Porsche Ceramic Composite Brakes (PCCB).
Information about Racing Compound Characteristics
Information about Brake Pad Size
Sold as set of 4 pads for one axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
7818.
The product you are viewing cross references to these numbers
This Product Fits:
Porsche 996 C4S 02-05 Front
Porsche 996 GT3 MKI 99-01 Front
Porsche 996 Turbo 02-05 Front
Porsche 997 3.8L C2S/C4S 2005>> Front
Porsche 997 3.8L MK11 C2S/C4S 2009>> Front
Please note: These pads have the clip cut out for the brake sensor but there is no hole drilled in the pad to accept the wire. As this is track and racing pad it is not common practice to fit the sensors. If you insist on fitting the sensors, you will have to drill a hole for the wire to slot in.
The absolute best brakes on the market Performance Friction brakes are the standard of excellence in high-performance vehicles, and street vehicles.
Track days and street upgrades for nearly every make and model are manufactured to meet or exceed OE specifications. Whether you're driving a brand new Porsche or a vintage collectible, we've got the brakes to fit your needs. Design 911 offer a wide range of Performance Friction brake pads for all Porsche models from 1970-2010, also in the program are a range of Two-piece floating street upgrade disc and replacement steel disc for cars with Porsche Ceramic Composite Brakes (PCCB).
Information about Racing Compound Characteristics
Information about Brake Pad Size
Sold as set of 4 pads for one axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
7818.
7818.08.17.44
7818.11.17.44
The product you are viewing cross references to these numbers
Prices from: €340.16
Shop Securely
12 Month Warranty
Worldwide Delivery
PFC Track & Race Brake Pads Porsche FRONT 986 S, 996, 997, REAR 996 C4S, 996TT
Code: 0776.
Vehicle Group
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Information
PERFORMANCE FRICTION Fast Road & Race Brake Pads For Porsche 0776 / E2405 / T5104.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0776.
The product you are viewing cross references to these numbers
Replacement OE Part No 99635294903 / 99735193904.
This Product Fits:
Porsche 986 Boxster S 3.2 99-05 Front
Porsche 987 Boxster S 3.2 05>> Front*
Porsche 987C Cayman 06>> Front*
Porsche 996 3.4/3.6 97-05 Front
Porsche 997 3.6L C2/C4* 05-09 Front*
*Not S 3.8L 
Porsche 996 C4S 02-05 Rear
Porsche 996 GT2 02-05 Rear
Porsche 996 GT3 MKI 99-01 Rear
Porsche 996 GT3 MKII 02-05 Rear
Porsche 996 3.6LTurbo 02-05 Rear
Porsche 997 3.8L C2S/C4S 05-09 Rear
The absolute best brakes on the market Performance Friction brakes are the standard of excellence in high-performance vehicles, and street vehicles.
Track days and street upgrades for nearly every make and model are manufactured to meet or exceed OE specifications. Whether you're driving a brand new Porsche or a vintage collectible, we've got the brakes to fit your needs. Design 911 offer a wide range of Performance Friction brake pads for all Porsche models from 1970 - 2010, also in the program are a range of Two-piece floating street upgrade disc and replacement steel disc for cars with Porsche Ceramic Composite Brakes (PCCB).
Information about Racing Compound Characteristics
Information about Brake Pad Size
Sold as set of 4 pads for one axle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0776.
99635294903
0776.08.17.44
0776.11.17.44
99735193904
99635294904
The product you are viewing cross references to these numbers
Prices from: €373.06
Shop Securely
12 Month Warranty
Worldwide Delivery
Titanium Brake Pad Heat Shields Size: E2405/T5104. Porsche 986/987 Boxster / 987C Cayman / 996 / 997 (OE Part No 99635294903 / 99735193904)
Code: TS-917-4
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Information
Titanium Brake Pad Heat Shields.
This Product Fits:
Porsche 986 Boxster S 3.2 99-05 Front
Porsche 987 Boxster S 3.2 05>> Front
Porsche 987C Cayman 06>> Front
Porsche 996 3.4/3.6 97-05 Front
Porsche 997 3.6L C2/C4* 05-09 Front
*Not S 3.8L
Porsche 997 3.6L C2/C4* 09>> Front
*Not S 3.8L
Porsche 996 C4S 02-05 Rear
Porsche 996 GT2 02-05 Rear
Porsche 996 GT3 MKI 99-01 Rear
Porsche 996 GT3 MKII 02-05 Rear
Porsche 996 3.6LTurbo 02-05 Rear
Porsche 997 3.8L C2S/C4S 05-09 Rear
The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material has low thermal conductivity. This means that it is very bad at transferring heat, which is fantastic if you are trying to keep your fluid cool.
The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:
Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk
You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from losing the pedal due to boiling at the wrong time and making the day very expensive.
Water jet cut to exact size, no cutting, grinding, or swearing involved.
Price is per axle (four pieces)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TS-917-4
The product you are viewing cross references to these numbers
This Product Fits:
Porsche 986 Boxster S 3.2 99-05 Front
Porsche 987 Boxster S 3.2 05>> Front
Porsche 987C Cayman 06>> Front
Porsche 996 3.4/3.6 97-05 Front
Porsche 997 3.6L C2/C4* 05-09 Front
*Not S 3.8L
Porsche 997 3.6L C2/C4* 09>> Front
*Not S 3.8L
Porsche 996 C4S 02-05 Rear
Porsche 996 GT2 02-05 Rear
Porsche 996 GT3 MKI 99-01 Rear
Porsche 996 GT3 MKII 02-05 Rear
Porsche 996 3.6LTurbo 02-05 Rear
Porsche 997 3.8L C2S/C4S 05-09 Rear
The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material has low thermal conductivity. This means that it is very bad at transferring heat, which is fantastic if you are trying to keep your fluid cool.
The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:
Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk
You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from losing the pedal due to boiling at the wrong time and making the day very expensive.
Water jet cut to exact size, no cutting, grinding, or swearing involved.
Price is per axle (four pieces)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TS-917-4
23329
07.B314.15
07B31415
99635294903
99735193904
The product you are viewing cross references to these numbers
€88.35
Now €83.93
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Titanium Brake Pad Heat Shields Size: E2474/T5110 (OE Part No 99635194912)
Code: TS-916-4
Vehicle Group
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
Information
Titanium Brake Pad Heat Shields.
This Product Fits:
Porsche 996 C4S 02-05 Front
Porsche 996 GT3 MKI 99-01 Front
Porsche 996 Turbo 02-05 Front
Porsche 997 3.8L C2S/C4S 05-09 Front
Porsche 997 3.8L C2S/C4S 09>> Front
The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material has low thermal conductivity. This means that it is very bad at transferring heat, which is fantastic if you are trying to keep your fluid cool.
The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:
Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk
You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from losing the pedal due to boiling at the wrong time and making the day very expensive.
Water jet cut to exact size, no cutting, grinding, or swearing involved.
Price is per axle (four pieces)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TS-916-4
The product you are viewing cross references to these numbers
This Product Fits:
Porsche 996 C4S 02-05 Front
Porsche 996 GT3 MKI 99-01 Front
Porsche 996 Turbo 02-05 Front
Porsche 997 3.8L C2S/C4S 05-09 Front
Porsche 997 3.8L C2S/C4S 09>> Front
The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material has low thermal conductivity. This means that it is very bad at transferring heat, which is fantastic if you are trying to keep your fluid cool.
The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:
Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk
You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from losing the pedal due to boiling at the wrong time and making the day very expensive.
Water jet cut to exact size, no cutting, grinding, or swearing involved.
Price is per axle (four pieces)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TS-916-4
23139
23330
07.B314.16
07B31416
99635194912
The product you are viewing cross references to these numbers
€88.35
Now €83.93
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
DISPLAYING 1 to 4 (of 4 products)
Also found on these pages
About Performance Friction Brakes
Performance Friction Brake Pads
“ (the) first step is to upgrade the brake pads from the organic or semi-metallic original equipment material to a Carbon Metallic® pad…We found that these less compressible pads improved initial bite and reduced by nearly a half inch the pedal travel…”
Carbon Metallic® brake pads are unique in material and process—made of highly ordered Carbon Crystal structure molded through high density compression and processed though air craft quality heat treatment.
You may also like
-
Brake Pads & Disc Package
-
SPORTS Brake Pads & Disc Package
-
Brake Pads Packages
-
Brake Disc Standard
-
Brake Pads Standard
-
SPORTS Brake Disc
-
Brembo Standard brakes
-
Brembo Racing brakes
-
TEXTAR Brakes
-
PAGID Racing Brakes
-
Zimmermann Brakes
-
Giro Slotted Brake Disc
-
SHW Performance Brakes
-
EBC Brakes
-
Black Diamond Performance Brakes
-
Surface Transforms Ceramic Brakes
-
Rotinger Graphite Line
-
Replacement for Ceramic Disc
-
Brake Pad Wear Sensors
-
Brake Pad Anti-vibration shims
-
Caliper Bolts / Disc Screws
-
Pin Kit and Guide Plates
-
Performance Brake Hoses
-
Standard Brake Hoses
-
Caliper and Brake Lines
-
Brake Calipers
-
Brake Caliper Upgrades
-
HandBrake Shoes
-
HandBrake Cables
-
Brake Disc Cover Plates
-
ABS | Speed Sensors
-
Caliper Seals |Pistons
-
Brake Servo | Booster
-
Brake Master Cylinder
-
Brake Fluid Reservoir
-
Brake Fluid
-
Centre Locking Hubs
-
Titanium Brake Pad Shields
-
Duct Spoiler / Air Scoop
-
DesignTek Brake Kits
-
Build Your Own Brake Kit
Porsche Brake Disc Upgrades: Venting, Drilling, and Grooving Explained
Today we’re talking brake discs: the unsung heroes of your Porsche’s stopping power. What do they do? How can you tell when they need replacing? And what are the upgrade options for enhanced performance? It’s all here. We’ll explore the evolution of brake disc designs, from solid to vented, drilled, and grooved, explaining how each type improves performance. Plus, we’ll break down the materials: durable cast iron, high-carbon steel, and Porsche’s high-performance options like carbon ceramic and surface-coated discs. Whether you’re looking for better braking on the track or a cost-effective daily driving solution, we’ve got you covered.Popular Models
