Price Match Guarantee
Worldwide Delivery
12 Month Warranty
Air Filters
Filter by brand
Cold Air Induction Kit Porsche 996 C2 / C4 / C4S 1997-2004
Code: INDUCTIONKIT20
Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
Information
Designed to give 25% more air flow, which in turn gives more power.
NOTE: For manual cars only
Installing the cold air performance enhancement kit will make any standard 996 with factory mufflers sound as if you have added a very mild performance exhaust. This is perfect for any 996 owner that wants his car to sound slightly more aggressive than stock.
The cold air kit adds 1.5 liters of cold air by eliminating the plastic factory muffler in air pipe, this allows the engine to draw cold air across entire topside of air box (left and right rather than just from the right) Adds 0.42 seconds faster acceleration 3000-6000 RPM.
The cold air kit is made from 4 ply silicone tube - better flow from air box to throttle body.
No "Check engine" lights as you retain the factory MAF.
Please note this item fits MANUAL CARS ONLY Replacing Factory black hose 99611022157.
Kit Contains:
1 x Cold Air Hose
2 x Jubilee Clips
1 x Alloy Stopper plug
*Please add a K&N / BMC or DesignTek air filter with this kit as it is not included
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
INDUCTIONKIT20
The product you are viewing cross references to these numbers
NOTE: For manual cars only
Installing the cold air performance enhancement kit will make any standard 996 with factory mufflers sound as if you have added a very mild performance exhaust. This is perfect for any 996 owner that wants his car to sound slightly more aggressive than stock.
The cold air kit adds 1.5 liters of cold air by eliminating the plastic factory muffler in air pipe, this allows the engine to draw cold air across entire topside of air box (left and right rather than just from the right) Adds 0.42 seconds faster acceleration 3000-6000 RPM.
The cold air kit is made from 4 ply silicone tube - better flow from air box to throttle body.
No "Check engine" lights as you retain the factory MAF.
Please note this item fits MANUAL CARS ONLY Replacing Factory black hose 99611022157.
Kit Contains:
1 x Cold Air Hose
2 x Jubilee Clips
1 x Alloy Stopper plug
*Please add a K&N / BMC or DesignTek air filter with this kit as it is not included
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
INDUCTIONKIT20
0549290110
99951235002
999110SH002
99604000052
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Jubilee Clamp 12mm 90-110 (0549290110
1 x Hose screw clamp 9mm 80-100 (99951235002
1 x INDUCTION SILICONE HOSE 002 (996/997 C2/4) BLUE (999110SH002
1 x Induction alloy insert (52mm). Porsche 996 (99604000052
Price: €87.73
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Intake Plenum + 82MM Throttle Body + Induction Kit Porsche 996 / 997
Code: IPDKIT99602
Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
Information
Aluminum Intake Plenum + 82MM Throttle Body + Induction Kit Porsche 996 / 997
Dyno tested power gains with our ECU remap archiving and extra +30Bhp To read more about this power increase Click Here
IPD
Porsche has been controlling engine output by restricting the inlet track for decades. This has been successfully accomplished by utilizing smaller throttle bodies. This simple power control solution has been a very effective way of preventing lower level models from out performing certain flagship models, especially models with prolific racing pedigree. Although the factory engine packages are fantastic performance machines, they are engineered and developed to achieve specific performance numbers that satisfy a target demographic and compete with rival brands. Unfortunately driving enthusiasts who seek an elevated Porsche driving experience require performance levels well outside the target market.
Power improvements will be fully realized once the factory ECU/DME makes all the necessary "adaptation" requirements. This process can be expedited with a series of "hard pulls" or spirited full throttle acceleration runs through the gears. Of course this should only be performed on a closed course circuit.
Induction Kit
Engineered for maximum power and sound. This engineered system eliminates the OEM restrictive airbox and incorporates a high flow cone air filter and sealed fresh air chamber. A cone filter has superior air flow characteristics as compared to flat panel filters. The cone filter better shapes the air as it enters through the filter for smoother straighter more formed air. Next, we have CMC machined a MAF housing to the exact tolerances of the OEM housing for precise MAF reading and NO CHECK ENGINE LIGHTS. In addition, the sealed air chamber sections off the cone air filter from the engine compartment so that it can only draw cool outside air for more power. Finally, the system is injected molded from crosslink polyethylene which has the lowest thermal conductivity rating of any single-layered moldable material available on the market today. This is key in keeping intake temperatures low and increasing power.
Fits:
Porsche 997 Carrera
Porsche 996 Carrera*
(*FOR CARS WITH "ELECTRONIC ACCELERATOR (M620)" NOT FOR EARLY CABLE THROTTLE CARS)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT99602
The product you are viewing cross references to these numbers
Dyno tested power gains with our ECU remap archiving and extra +30Bhp To read more about this power increase Click Here
IPD
Porsche has been controlling engine output by restricting the inlet track for decades. This has been successfully accomplished by utilizing smaller throttle bodies. This simple power control solution has been a very effective way of preventing lower level models from out performing certain flagship models, especially models with prolific racing pedigree. Although the factory engine packages are fantastic performance machines, they are engineered and developed to achieve specific performance numbers that satisfy a target demographic and compete with rival brands. Unfortunately driving enthusiasts who seek an elevated Porsche driving experience require performance levels well outside the target market.
Power improvements will be fully realized once the factory ECU/DME makes all the necessary "adaptation" requirements. This process can be expedited with a series of "hard pulls" or spirited full throttle acceleration runs through the gears. Of course this should only be performed on a closed course circuit.
Induction Kit
Engineered for maximum power and sound. This engineered system eliminates the OEM restrictive airbox and incorporates a high flow cone air filter and sealed fresh air chamber. A cone filter has superior air flow characteristics as compared to flat panel filters. The cone filter better shapes the air as it enters through the filter for smoother straighter more formed air. Next, we have CMC machined a MAF housing to the exact tolerances of the OEM housing for precise MAF reading and NO CHECK ENGINE LIGHTS. In addition, the sealed air chamber sections off the cone air filter from the engine compartment so that it can only draw cool outside air for more power. Finally, the system is injected molded from crosslink polyethylene which has the lowest thermal conductivity rating of any single-layered moldable material available on the market today. This is key in keeping intake temperatures low and increasing power.
Fits:
Porsche 997 Carrera
Porsche 996 Carrera*
(*FOR CARS WITH "ELECTRONIC ACCELERATOR (M620)" NOT FOR EARLY CABLE THROTTLE CARS)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT99602
99760511601
97182
57-7000
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Throttle body 82mm for Porsche (99760511601/1
1 x Aluminum Intake Plenum Competition 82MM Porsche 996 / 997 (97182
1 x K&N Air Induction Kit for Porsche 996 / 997 3.6L (57-7000
€1,570.00
Now €1,491.50
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Intake Plenum Competition 82MM + Throttle Body Porsche 996 Carrera 3.4L/ 3.6L IPD
Code: IPDKIT99601
Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
Information
Aluminum Intake Plenum "Competition" 82MM + Throttle Body Porsche 996 Carrera 3.4L /3.6L IPD
Fits:
Porsche Porsche 996 Carrera C2 3.6L
Porsche Porsche 996 Carrera C4 3.6L
Porsche Porsche 996 Carrera C2 3.4L*
Porsche Porsche 996 Carrera C4 3.4L*
(*FOR CARS WITH "ELECTRONIC ACCELERATOR (M620)" NOT FOR EARLY CABLE THROTTLE CARS)
Porsche has been controlling engine output by restricting the inlet track for decades. This has been successfully accomplished by utilizing smaller throttle bodies. This simple power control solution has been a very effective way of preventing lower level models from out performing certain flagship models, especially models with prolific racing pedigree. Although the factory engine packages are fantastic performance machines, they are engineered and developed to achieve specific performance numbers that satisfy a target demographic and compete with rival brands. Unfortunately driving enthusiasts who seek an elevated Porsche driving experience require performance levels well outside the target market.
All of the IPD Plenums deliver substantial power and torque gains, but when combined with larger throttle bodies they perform even better. All of the IPD "Competition" Plenums utilize the next largest size throttle body offered by Porsche. In this case, the Competition Carrera upgrades the factory OE 74mm throttle body with Porsche's 82mm 997 GT3 throttle body. All of our Competition Plenums are designed to perform with cars equipped with high performance exhaust systems. The more extensive the exhaust system (headers, kats and mufflers) the better. Optimizing air intake and exhaust together creates a balanced performance package that allows the engine to inhale and exhale more air thus creating more power and torque.
IPD has pioneered another new Plenum design with the Competition Carrera Plenum. Laminar flows and volumetric efficiencies have been further enhanced with our unique and innovative internal merge collector area. This completely new approach has yielded not only great performance gains but more linear power delivery and improved throttle response as well. Gains vary depending on pre-existing mods and quality of after-market exhaust installed. As we all "should" know, horsepower and torque become harder to find and typically more expensive as we climb the proverbial performance ladder. That being said, performance components yield different power gains depending on the order they were installed. IPD tests and evaluates all products on bone stock cars, this establishes a level playing field and a better "apples to apples" comparison. The Competition Carrera Plenum however is designed to work with applications that are already moderately to heavily modified. Power gains will vary with each Carrera, but the bottom line is, there will be noticeable and impressive gains that are sure to make any Porsche Carrera driving enthusiast smile.
Power improvements will be fully realized once the factory ECU/DME makes all the necessary "adaptation" requirements. This process can be expedited with a series of "hard pulls" or spirited full throttle acceleration runs through the gears. Of course this should only be performed on a closed course circuit.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT99601
The product you are viewing cross references to these numbers
Fits:
Porsche Porsche 996 Carrera C2 3.6L
Porsche Porsche 996 Carrera C4 3.6L
Porsche Porsche 996 Carrera C2 3.4L*
Porsche Porsche 996 Carrera C4 3.4L*
(*FOR CARS WITH "ELECTRONIC ACCELERATOR (M620)" NOT FOR EARLY CABLE THROTTLE CARS)
Porsche has been controlling engine output by restricting the inlet track for decades. This has been successfully accomplished by utilizing smaller throttle bodies. This simple power control solution has been a very effective way of preventing lower level models from out performing certain flagship models, especially models with prolific racing pedigree. Although the factory engine packages are fantastic performance machines, they are engineered and developed to achieve specific performance numbers that satisfy a target demographic and compete with rival brands. Unfortunately driving enthusiasts who seek an elevated Porsche driving experience require performance levels well outside the target market.
All of the IPD Plenums deliver substantial power and torque gains, but when combined with larger throttle bodies they perform even better. All of the IPD "Competition" Plenums utilize the next largest size throttle body offered by Porsche. In this case, the Competition Carrera upgrades the factory OE 74mm throttle body with Porsche's 82mm 997 GT3 throttle body. All of our Competition Plenums are designed to perform with cars equipped with high performance exhaust systems. The more extensive the exhaust system (headers, kats and mufflers) the better. Optimizing air intake and exhaust together creates a balanced performance package that allows the engine to inhale and exhale more air thus creating more power and torque.
IPD has pioneered another new Plenum design with the Competition Carrera Plenum. Laminar flows and volumetric efficiencies have been further enhanced with our unique and innovative internal merge collector area. This completely new approach has yielded not only great performance gains but more linear power delivery and improved throttle response as well. Gains vary depending on pre-existing mods and quality of after-market exhaust installed. As we all "should" know, horsepower and torque become harder to find and typically more expensive as we climb the proverbial performance ladder. That being said, performance components yield different power gains depending on the order they were installed. IPD tests and evaluates all products on bone stock cars, this establishes a level playing field and a better "apples to apples" comparison. The Competition Carrera Plenum however is designed to work with applications that are already moderately to heavily modified. Power gains will vary with each Carrera, but the bottom line is, there will be noticeable and impressive gains that are sure to make any Porsche Carrera driving enthusiast smile.
Power improvements will be fully realized once the factory ECU/DME makes all the necessary "adaptation" requirements. This process can be expedited with a series of "hard pulls" or spirited full throttle acceleration runs through the gears. Of course this should only be performed on a closed course circuit.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT99601
99760511601
97182
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Throttle body 82mm for Porsche (99760511601/1
1 x Aluminum Intake Plenum Competition 82MM Porsche 996 / 997 (97182
€1,024.59
Now €973.36
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Air Filter Vortex for Porsche 996 C2/4 1997-2004 /997 C2/4 - DesignTek
Code: 3603001597
Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
Information
At the heart of the unique DesignTek air filter is a specially developed polyurethane foam which acts as a filtration medium, higher both higher performance and life expectancy then paper air filters. The PYRAMID VORTEX design outer surface area will absorb larger amounts of airborne dirt particles, while still allowing air to flow freely.
High flow with excellent filteration. Washable and reusable.
This Product Fits:
Porsche 911 (996) 3.4 Carrera (301bhp) 06/97 - 10/01
Porsche 911 (996) 3.4 Carrera, Carrera 4 (320bhp) 06/99 -
Porsche 911 (996) 3.6 Carrera, Carrera 4, 4S (320bhp) 09/01 -
Porsche 911 (996) 3.6 Carrera, Carrera 4 (345bhp) 05/02 -
Porsche 911 (997) 3.6 Carrera 07/04 -
Porsche 911 (997) 3.8 Carrera S 07/04 -
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3603001597
99611013152
33-2786
99611013151
99711013152
The product you are viewing cross references to these numbers
€108.17
Now €102.76
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
BMC Air Filter Cleaning Kit - Detergent + Oil
Code: WA2
Information
Rejuvenate your existing BMC air filter using this kit.
Includes special BMC detergent and an oil applicator - in either spray bottle or liquid form.
HOW IS A BMC FILTER REGENERATED?
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WA2
The product you are viewing cross references to these numbers
Includes special BMC detergent and an oil applicator - in either spray bottle or liquid form.
HOW IS A BMC FILTER REGENERATED?
We recommend using original BMC kits only, as other products may not be effective or may damage the filter permanently, thus invalidating the warranty.
We recommend regenerating the filter (washing + oil application) every 20.000 – 25.000 km to ensure best performance and long service life.
This value is a rough estimate and can vary based on the climatic conditions and the ground on which the vehicle is used (sand, dirt roads, etc.).
The various steps to be carried out in order to regenerate the filtering element are indicated in the instructions contained in the regeneration kit.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WA2
99-5000EU
The product you are viewing cross references to these numbers
Prices from: €18.09
Shop Securely
12 Month Warranty
Worldwide Delivery
BMC Air Filter. Porsche 996 / 997 (Part No. FB156/01)
Code: FB156/01
Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
Information
BMC Air Filter.
This Product Fits:
Porsche 911 (996) 3.4 Carrera 2/4
Porsche 911 (996) 3.6 Carrera 2/4
Porsche 911 (997) 3.6 Carrera 2/4
Porsche 911 (997) 3.8 Carrera 2S /4S
Panel Filter Size:
- width - 171/128mm
- height - 3528mm
BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.
DESIGN AND MATERIALS
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FB156
The product you are viewing cross references to these numbers
This Product Fits:
Porsche 911 (996) 3.4 Carrera 2/4
Porsche 911 (996) 3.6 Carrera 2/4
Porsche 911 (997) 3.6 Carrera 2/4
Porsche 911 (997) 3.8 Carrera 2S /4S
Panel Filter Size:
- width - 171/128mm
- height - 3528mm
BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.
DESIGN AND MATERIALS
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FB156
99611013152
99611013151
The product you are viewing cross references to these numbers
€141.37
Now €134.30
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Cold Air Induction Kit Porsche Tiptronic 996 C2 / C4 / C4S 1997-2004
Code: TB-5570
Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
Information
Silicone Throttle Body Resonator Delete Hose to suit Porsche 996 / 911 Carrera 4, 3.6Ltr N/A, Tiptronic. (Resonator Delete, Keeps Vacuum Connection) 2002 ~ 2005
NOTE: For Tiptronic cars only
Please also add the following
1 x 0549290110
1 x 99951235002
1 x 99604000052
Installing the cold air performance enhancement kit will make any standard 996 with factory mufflers sound as if you have added a very mild performance exhaust. This is perfect for any 996 owner that wants his car to sound slightly more aggressive than stock.
The cold air kit adds 1.5 liters of cold air by eliminating the plastic factory muffler in air pipe, this allows the engine to draw cold air across entire topside of air box (left and right rather than just from the right) Adds 0.42 seconds faster acceleration 3000-6000 RPM.
The cold air kit is made from 4 ply silicone tube - better flow from air box to throttle body.
No "Check engine" lights as you retain the factory MAF.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TB-5570
The product you are viewing cross references to these numbers
NOTE: For Tiptronic cars only
Please also add the following
1 x 0549290110
1 x 99951235002
1 x 99604000052
Installing the cold air performance enhancement kit will make any standard 996 with factory mufflers sound as if you have added a very mild performance exhaust. This is perfect for any 996 owner that wants his car to sound slightly more aggressive than stock.
The cold air kit adds 1.5 liters of cold air by eliminating the plastic factory muffler in air pipe, this allows the engine to draw cold air across entire topside of air box (left and right rather than just from the right) Adds 0.42 seconds faster acceleration 3000-6000 RPM.
The cold air kit is made from 4 ply silicone tube - better flow from air box to throttle body.
No "Check engine" lights as you retain the factory MAF.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TB-5570
99611022158
The product you are viewing cross references to these numbers
€113.05
Now €107.40
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Fabspeed Carbon Fibre Competition Intake – Replacement Air Filter. Porsche 996 & 997 Carrera 1998-2012
Code: FS30LAFO
Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
Information
Replacement air filter for 996, 997-1, and 997-2 Carrera models equipped with Fabspeed's current Motorsport Carbon Fibre Competition Air Intake System with the "Y" intake tube.
Sold individually; x2 filters are required.
Fits:
Models Fitted with FSPOR996COMPAI or FSPOR996COMPAITX
Porsche 996 Carrera 1998-05
Models Fitted with FSPOR996GT3COMPAI
Porsche 996 GT3 1998-05
Porsche 996 GT3 RS 2004-05
Models Fitted with FSPOR997COMPAI or FSPOR9972COMPAI
Porsche 997-1 Carrera 2005-08
Porsche 997-2 Carrera 2009-12
Models Fitted with 3603109973 (FSPOR997TCOMPAI) / FSPOR9972TCOMPAI
Porsche 997-1 Turbo 2007-09
Porsche 997-2 Turbo 2010-13
Models Fitted with FSPOR997GT3COMPAI / FSPOR9972GT3COMPAI
Porsche 997 GT3 / RS 2007-11
Why choose Fabspeed?
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FS30LAFO
The product you are viewing cross references to these numbers
Sold individually; x2 filters are required.
Fits:
Models Fitted with FSPOR996COMPAI or FSPOR996COMPAITX
Porsche 996 Carrera 1998-05
Models Fitted with FSPOR996GT3COMPAI
Porsche 996 GT3 1998-05
Porsche 996 GT3 RS 2004-05
Models Fitted with FSPOR997COMPAI or FSPOR9972COMPAI
Porsche 997-1 Carrera 2005-08
Porsche 997-2 Carrera 2009-12
Models Fitted with 3603109973 (FSPOR997TCOMPAI) / FSPOR9972TCOMPAI
Porsche 997-1 Turbo 2007-09
Porsche 997-2 Turbo 2010-13
Models Fitted with FSPOR997GT3COMPAI / FSPOR9972GT3COMPAI
Porsche 997 GT3 / RS 2007-11
Why choose Fabspeed?
- High-quality AFE filter designed specifically for Fabspeed Dry-style filter – no oiling required, preventing MAF sensor issues
- Easy to clean with just soap and water
- Backed by Fabspeed's Lifetime Warranty for peace of mind
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FS30LAFO
99611002156
99611092150
99611092151
99611013152
99711002300
99711002301
99711092300
99711092301
99711002100
99711092100
99711092101
99711092500
99711013200
99711013201
99711002031
99711002131
99711002231
99711002240
99711002250
99711002260
99711002331
99711002340
99711002350
99711002360
99711013030
99711013031
99711013032
The product you are viewing cross references to these numbers
€122.57
Now €116.44
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery
Induction alloy insert (52mm). Porsche 996
Code: 99604000052
Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
Information
Induction alloy insert for Throttle Body Resonator Delete Hose part no TB-5570.
52mm
Fits: Porsche 996 C2 / C4 / C4S 1997-2004
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99604000052
The product you are viewing cross references to these numbers
52mm
Fits: Porsche 996 C2 / C4 / C4S 1997-2004
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99604000052
99604000052
The product you are viewing cross references to these numbers
€29.75
Now €28.26
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
K&N Air Filter for Porsche 996 / 997
Code: 33-2786
Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
Information
K&N High Performance replacement air filter.
This Product Fits:
Porsche 911 (996) 3.4L Carrera (301bhp) 06/1997-10/2001
Porsche 911 (996) 3.4L Carrera 2/4 (320bhp) 06/1999>>
Porsche 911 (996) 3.6L Carrera 2/4/4S (320bhp) 09/2001>>
Porsche 911 (996) 3.6L Carrera 2/4 (345bhp) 05/2002>>
Porsche 911 (997) 3.6L Carrera 07/2004>>
Porsche 911 (997) 3.8L Carrera S 07/2004>>
K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower.
Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's 10-Year/Million Mile Limited Warranty.
K&N drop-in replacement filters are designed to install easily into your factory air box.
Works with Original Equipment Manufacturer Vehicle Electronics.
Environmentally Friendly, K&N Reusable Air Filters
Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
33-2786
The product you are viewing cross references to these numbers
This Product Fits:
Porsche 911 (996) 3.4L Carrera (301bhp) 06/1997-10/2001
Porsche 911 (996) 3.4L Carrera 2/4 (320bhp) 06/1999>>
Porsche 911 (996) 3.6L Carrera 2/4/4S (320bhp) 09/2001>>
Porsche 911 (996) 3.6L Carrera 2/4 (345bhp) 05/2002>>
Porsche 911 (997) 3.6L Carrera 07/2004>>
Porsche 911 (997) 3.8L Carrera S 07/2004>>
K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower.
Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's 10-Year/Million Mile Limited Warranty.
K&N drop-in replacement filters are designed to install easily into your factory air box.
Works with Original Equipment Manufacturer Vehicle Electronics.
Environmentally Friendly, K&N Reusable Air Filters
Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
33-2786
99611013151
The product you are viewing cross references to these numbers
€114.04
Now €109.48
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
K&N Air Induction Kit for Porsche 996 / 997 3.6L
Code: 57-7000
Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
Information
K&N Air Induction Kit for Porsche 996 / 997 3.6L
Fits:
Porsche 996 C2 1998-2004
Porsche 996 C4 1998-2004
Porsche 996 C4S 2000-2004
Not Turbo Models
Porsche 997 C2 / C4 2005>>
3.6L Engines
Engineered for maximum power and sound. This engineered system eliminates the OEM restrictive air box and incorporates a high flow cone air filter and sealed fresh air chamber. A cone filter has superior air flow characteristics as compared to flat panel filters. The cone filter better shapes the air as it enters through the filter for smoother straighter more formed air. Next, we have CMC machined a MAF housing to the exact tolerances of the OEM housing for precise MAF reading and NO CHECK ENGINE LIGHTS. In addition, the sealed air chamber sections off the cone air filter from the engine compartment so that it can only draw cool outside air for more power. Finally, the system is injected moulded from cross link polyethylene which has the lowest thermal conductivity rating of any single-layered mould-able material available on the market today. This is key in keeping intake temperatures low and increasing power.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
57-7000
The product you are viewing cross references to these numbers
Fits:
Porsche 996 C2 1998-2004
Porsche 996 C4 1998-2004
Porsche 996 C4S 2000-2004
Not Turbo Models
Porsche 997 C2 / C4 2005>>
3.6L Engines
Engineered for maximum power and sound. This engineered system eliminates the OEM restrictive air box and incorporates a high flow cone air filter and sealed fresh air chamber. A cone filter has superior air flow characteristics as compared to flat panel filters. The cone filter better shapes the air as it enters through the filter for smoother straighter more formed air. Next, we have CMC machined a MAF housing to the exact tolerances of the OEM housing for precise MAF reading and NO CHECK ENGINE LIGHTS. In addition, the sealed air chamber sections off the cone air filter from the engine compartment so that it can only draw cool outside air for more power. Finally, the system is injected moulded from cross link polyethylene which has the lowest thermal conductivity rating of any single-layered mould-able material available on the market today. This is key in keeping intake temperatures low and increasing power.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
57-7000
57-7000
577000
The product you are viewing cross references to these numbers
€545.41
Now €523.59
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
K&N Filter care service kit aerosol - international
Code: 99-5000EU
Information
K&N Filter care service kit aerosol - international.
K&N Recharger Kit 99-5000EU is designed for cleaning your K&N oiled cotton air filter when it is time to be serviced.
Part 99-5000EU is labeled in English, Spanish, Swedish, Polish and Czech for use in Europe.
The kit comes with K&N Power Kleen air filter cleaner and air filter oil.
99-5000EU will restore air flow efficiency and will bring your K&N oiled cotton air filter to like new condition. K&N Power Kleen works to dissolve the dirt build up and old filter oil, and can be washed away with water. After the air filter fully dries re-oil your air filter then reinstall it.
This Recharger Kit comes with a 204 milliliter aerosol spray can of oil and a 355 milliliter K&N pump bottle of Power Kleen air filter cleaner.
NOTE: This product has got shipping restrictions for export
Please note this item can not be sent out by plane. Deliveries only to European countries by road service
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99-5000EU
The product you are viewing cross references to these numbers
K&N Recharger Kit 99-5000EU is designed for cleaning your K&N oiled cotton air filter when it is time to be serviced.
Part 99-5000EU is labeled in English, Spanish, Swedish, Polish and Czech for use in Europe.
The kit comes with K&N Power Kleen air filter cleaner and air filter oil.
99-5000EU will restore air flow efficiency and will bring your K&N oiled cotton air filter to like new condition. K&N Power Kleen works to dissolve the dirt build up and old filter oil, and can be washed away with water. After the air filter fully dries re-oil your air filter then reinstall it.
This Recharger Kit comes with a 204 milliliter aerosol spray can of oil and a 355 milliliter K&N pump bottle of Power Kleen air filter cleaner.
NOTE: This product has got shipping restrictions for export
Please note this item can not be sent out by plane. Deliveries only to European countries by road service
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99-5000EU
99-5000EU
WA200-500
WA250-500
The product you are viewing cross references to these numbers
€16.85
Now €16.18
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Rennline air intake, carbon fibre. Porsche 996 / 997
Code: M110
Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
Information
Rennline air intake, carbon fibre.
Fits:
Porsche 996 C2 / C4 / C4S
Porsche 997 C2 / C4 / C2S / C4S
Product Description
With the Rennline Carbon Fibre Intake, your drive will never feel better. Made from carbon fibre with a high-flow air filter and stainless steel fasteners, this intake performs as well as it looks.
This system provides improved flow dynamics and unlocks hidden induction acoustics.
Features
- Save precious weight over stock unit
- Improved airflow over OEM unit.
- Improved induction noise
- Easily replace filters (without removing the box)
- Smooth carbon inlet for high velocity air
- Replacement filters available under SKU# M95
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
M110
99611002156
99611002158
99611092150
99611092151
99611013152
99711002300
99711002301
99711002100
99711002101
99611013151
The product you are viewing cross references to these numbers
€2,218.16
Now €2,107.25
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery
DISPLAYING 1 to 13 (of 13 products)
Also found on these pages
You may also like
-
Pulleys
-
Engine / Gearbox Mounts
-
Oil Flow / Sump
-
IMS Bearings
-
Engine Rods and Bolts
-
Thermostats
-
Radiators
-
Air Induction Kits
-
Performance Plenum
-
ECU Re-Mapping DIY
-
Electronic Throttle Booster
-
IRIDIUM POWER Spark Plugs
-
IRIDIUM RACING Spark Plugs
-
Plasma Direct Coils
-
Clutches / Flywheels
-
Hoses / Kits
-
Inter Coolers
-
ECU Reader / Fault Finder
-
Exhaust Packages
-
Supercharger Kits
-
Fuel Additives
-
Wössner Forged Piston Kit
-
CP Carrillo Connecting Rods
-
Capricorn Engine parts
Popular Models
