Sport & Track Seats

3D-printed Bucket seat centre panel.
Please note: Only available for vehicles with full-bucket seats and only for the driver's seat.



Fits:
Porsche 911 (991) R / GT3 / GT3 RS
Porsche 911 (991 II) Carrera T / Speedster / GT3 / GT3 RS / GT2 RS
Porsche 911 (992) Carrera GTS / Carrera 4 GTS
Porsche 911 (992) Turbo / Turbo S
Porsche 911 (992) GT3 / GT3 with Touring-Package
Porsche 718 (981) Boxster Spyder
Porsche 718 Boxster (982) GTS / GTS 4.0 / T
Porsche 718 Cayman (982) GTS / GTS 4.0 / T / GT4 / GT4 4.0
Porsche 718 Spyder

The 3D printed bodyform full-bucket seat combines maximum functionality with individual design. The seat cushion and the seat backrest of the full-bucket seat already installed in the vehicle are replaced by new elements. These consist of a solid and energy-absorbing substrate material, a 3D-printed elastic grille structure and a perforated top covering made of Race-Tex. The grille structure and perforation improve both the passive air conditioning and the resilience of the seat. At the same time, depending on the selected degree of hardness, the upholstery has a weight advantage of more than 8% compared to the standard material. A deep seat position typical of motor sports and increased lateral support thanks to a thigh cushion provide an even more direct feel for the track - for an experience similar to that in motor racing.

As a visual highlight, the visible grille elements on the cushion and backrest are available separately in various colours.

The 3D printed bodyform full-bucket seat can be installed and removed again in a few simple steps. Compatible with both 3- and 6-point seat belts. Includes a practical transport bag.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

982044779

The product you are viewing cross references to these numbers

Adjustable lumbar support lightweight bucket seat. 
Sold each - One per seat

Fits:
Porsche 718 Boxster / Cayman - 2017 Onwards
Porsche 991  - 2019 to 2019
Porsche 992 - 2019 Onwards
Porsche 918 Spyder- 2014 to 2016

The incredible Lightweight Bucket Seats from Porsche adorn many vehicles from the 918 to the GT3, GT2, GT4, T and many other models if so equipped. 

We created this adjustable lumbar support for our vehicles out of necessity. Not only for the driver but the passenger who agreed to that 6 hour journey as our co-pilot. Typically these are quite comfortable seats but on longer journeys, a little lumbar support goes a long way to comfort the back of you and your co-pilot. 

These install in a minute for each side, adjustable for height (lower back, small of back, etc)

The air bladder is adjustable via a simple and lightweight ball pump and once the desired support is obtained, the ball pump can be removed and the hose and check valve tucked into the seat for an invisible install. Or just keep the ball for adjustment at anytime.

Front seat angle adjuster block set. 
Sold per seat



Firs:
Porsche 992 GT3 - 2019 Onwards
Porsche 992 GT3 RS - 2019 Onwards

The Porsche LWB Seat Angle Adjuster is an optimisation accessory designed by the SilverRocket racing team based on years of experience in endurance racing with Porsche race cars. It is specifically designed for Porsche's original carbon fiber bucket seats, aiming to create a comfortable sitting posture similar to Porsche race cars, allowing for a more comfortable driving experience.

Porsche LWB Seat Angle Adjuster can increase the backward tilt angle of the seat, solving the problem of the original upright posture that is not suitable for long-time driving, especially when the original seat angle causes discomfort in the neck due to the head being forced forward when wearing a helmet.

In addition, through SR's exclusive innovative design and precise production process that perfectly fits Porsche's original LWB seats, the seat height and front-back adjustment function can be retained while changing the seat angle, without damaging the seat rails.

Finally, to ensure the safety of our product in a track environment, we exclusively use ultra-high-strength TC-4 titanium alloy, which provides better reliability and safety beyond the original strength of Porsche in a track environment.

Highlights:

High Quality TC-4 Titinium: 

Porsche LWB Seat Angle Adjuster is made of a more expensive aerospace-grade TC-4 titanium alloy, which surpasses the traditional aluminum option in every aspect. Especially in high-pressure track driving, it provides over 10 times the aluminum alloy's tensile strength and yield strength, bringing you a safer driving experience and better durability.

Perfect Contouring:  
Our seat adjuster is precisely CNC engineered to perfectly contour the shape of the mating surfaces of your LWB seats, creating a rigid structure that professional racers prefer.

Minimally Invasive Design: 
Unlike other products, our unique design does not mount to the seat slider hinges, ensuring that your slider remains undamaged and fully functional.

Sleek Appearance:  
The seat adjuster is finished with electroplated black nickel, giving it a sleek and polished appearance that complements the interior aesthetics of your Porsche 992 GT3 RS.

Function:
By increasing the incline of the driver's seat, you can achieve a better seating posture for both high-performance driving and long-distance comfort. This is particularly crucial when wearing a helmet on the track. The original upright seating position can force your head to bend forward with extensive discomfort and loss in performance. With our seat adjuster, you can create more space to accommodate the helmet, allowing for a natural and comfortable driving position.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9GT881105BY

The product you are viewing cross references to these numbers

Grille elements for 3D-printed Bucket seat centre panel.
3-parts

"Grille elements in Black, 9820447898YR"

"Grille elements in Guards Red, 98204478984A"

"Grille elements in Racing Yellow, 9820447891S1"

Fits:
Porsche 911 (991) R / GT3 / GT3 RS
Porsche 911 (991 II) Carrera T / Speedster / GT3 / GT3 RS / GT2 RS
Porsche 911 (992) Carrera GTS / Carrera 4 GTS
Porsche 911 (992) Turbo / Turbo S
Porsche 911 (992) GT3 / GT3 with Touring-Package
Porsche 718 (981) Boxster Spyder
Porsche 718 Boxster (982) GTS / GTS 4.0 / T
Porsche 718 Cayman (982) GTS / GTS 4.0 / T / GT4 / GT4 4.0
Porsche 718 Spyder

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

982044789

The product you are viewing cross references to these numbers

Seat cover and softer foam set.
Porsche 918 fixed carbon bucket seats



If your car is equipped with the 918 fixed carbon bucket seats, changing the appearance has never been easier.

Choose from the OEM 911R onwards factory Black/Silver or Agate Grey material (not a reproduction) or our range of Pepita Houndstooth Fabric.

This set comes complete with new backrest and seat base foams (softer than the factory originals) covered in your desired material and fitting is straightforward.

Some found the factory original foams too hard so we have developed replacement foam sets slightly softer than the factory originals for a more comfortable ride, but still with all the factory details.

Please Note
When fitting sets to 2021 seats and onward make sure you disconnect the battery while working on the seats in order not to get any warning lights appearing.

Seat cover and standard foam set. Porsche 918 fixed carbon bucket seats



If your car is equipped with the 918 fixed carbon bucket seats, changing the appearance has never been easier.

Choose from the OEM 911R onwards factory Black/Silver or Agate Grey material (not a reproduction) or our range of Pepita Houndstooth Fabric.

This set comes complete with new backrest and seat base foams (as factory original) covered in your desired material and fitting is straightforward.

The foam used in these are the same density as the factory items. If you find these to hard, please see our range of softer foams.

Please Note
When fitting sets to 2021 seats and onward make sure you disconnect the battery while working on the seats in order not to get any warning lights appearing.

Side bolster protector covers. Porsche 918 fixed bucket seats



If your car is equipped with the 918 fixed carbon bucket seats, it can be a physical challenge climbing in and out, leading to visible scuffing, deep creases in the leather trim and torn stitching.

Here is a solution in the form of its 918 seat bolster protectors.

Once installed over the outside bolsters of both seats, this new-to-market product perfectly replicates the look of the standard bolster due to being made from Porsche factory black Napa leather and deviated stitching in the colour of your choice.
Along with the additional 'cuff cover', these protectors will also shield the rear of the bolster without looking out of place and installation is easy.
Please Note Protector "Cuff" does not have deviated stitching

Sold as a pair - Left and Right seat

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

918BOLSTERCVR

The product you are viewing cross references to these numbers

Sub strap mount Light Weight Bucket Seat (LWB). 
Sold each - Fits left or right hand seat



Fits:
Porsche 981 Cayman GT4
Porsche 718 Cayman GT4 / GT4 RS
Porsche 991.1 / 991.2 GT3 / GT3 RS
Porsche 992 GT3 / GT3 RS / GT2 RS

The Best Way to Install Sub Straps in your Porsche
The Performance Sub Strap Mount is a must-have for Porsche GT2RS, GT3/GT3RS, and GT4 owners using five, six, or seven-point harnesses with the factory CFRP Full Bucket Seats (also called Light Weight Bucket seats). Designed to easily bolt in using existing seat hardware without having to fully remove the seats from the car, the Performance Sub Strap Mount properly anchors your harness anti-submarine straps ("sub straps") to your seat base.

The CMS Performance Sub Strap Mount fits the driver- and/or passenger-side seats.
Performance install harness sub straps in your Porsche are Made in the USA.

Performance Sub Strap Mounts are designed, manufactured, and powder-coated entirely in-house in the USA. Made of solid carbon steel while only weighing 1.4 lbs (625g), there's not a stronger, more affordable solution available. Sub Strap Mounts allow full seat adjustment, fore/aft and up/down, while maintaining the ideal sub strap angle to your body for maximum safety.

Performance Sub Strap Mount Details:

• Solid steel construction for maximum safety
• Allows full fore/aft and up/down seat adjustment
• Powder-coated satin black standard; several Porsche colors available in the drop-down above!
• Fits driver or passenger seat (Porsche LWB only)
• Simple to install
• Compatible with OEM seat belt and airbag hardware