SmartTOP Top Control for Alfa Spider + Ferrari California - STLFAO1
STLFAO1
Information
The smartTOP roof control unit allows opening or closing the convertible top while driving at slow speeds.
It works similar to power-windows and opens or closes the roof automatically at the touch of a button. It is not necessary to stop the vehicle and pull the handbrake to operate the roof.
This Product Fits:
Alfa Spider (939) Model Year 2006+
Ferrari California Model Year 2008+
Ferrari California 30 Model Year 2012+
Ferrari California T Model Year 2014+
Open/Close your convertible top using the original factory remote control key / key fob.
Open/Close the top while driving
Never have to stop again for your top: Open/Close your top while driving. Speed programmable up to 40kmh.
One-Touch power convertible top
"One-Touch" convertible top operation allows your top to open or close automatically.
Individually programmable
Configure all functions of the module to meet your personal preferences via USB setup.
Passive / Invisible mode
Turn the whole module off with an easy key sequence. Ideal when letting someone else drive your car.
Reversible plug-in installation
Remove any time allowing sale or return of a leased vehicle in its original condition.
Separate window control
Raise and lower the windows separately by remote without activating the top.
Top convenience mode
Turning the ignition on or off does not interrupt convertible top operation.
Invert switch logic
Direction of center console top switch can be changed to "pull to open" and "push to close".
Comfort window close
One-Touch operation when closing all windows simultaneously via the separate driver's door switch.
Keyless Go top control
Open and close the top by touching the door handle three times.
Plug-n-Play Wiring harness
Custom designed plug-in-between wiring harness for extremely simple and quick installation included.
USB Port for easy setup / updates
This module can be configured and updated using
any Mac or PC.
It works similar to power-windows and opens or closes the roof automatically at the touch of a button. It is not necessary to stop the vehicle and pull the handbrake to operate the roof.
This Product Fits:
Alfa Spider (939) Model Year 2006+
Ferrari California Model Year 2008+
Ferrari California 30 Model Year 2012+
Ferrari California T Model Year 2014+
Ferrari 458 Spider
Ferrari 488 Spider
Open/Close your convertible top using the original factory remote control key / key fob.
Open/Close the top while driving
Never have to stop again for your top: Open/Close your top while driving. Speed programmable up to 40kmh.
One-Touch power convertible top
"One-Touch" convertible top operation allows your top to open or close automatically.
Individually programmable
Configure all functions of the module to meet your personal preferences via USB setup.
Passive / Invisible mode
Turn the whole module off with an easy key sequence. Ideal when letting someone else drive your car.
Reversible plug-in installation
Remove any time allowing sale or return of a leased vehicle in its original condition.
Separate window control
Raise and lower the windows separately by remote without activating the top.
Top convenience mode
Turning the ignition on or off does not interrupt convertible top operation.
Invert switch logic
Direction of center console top switch can be changed to "pull to open" and "push to close".
Comfort window close
One-Touch operation when closing all windows simultaneously via the separate driver's door switch.
Keyless Go top control
Open and close the top by touching the door handle three times.
Plug-n-Play Wiring harness
Custom designed plug-in-between wiring harness for extremely simple and quick installation included.
USB Port for easy setup / updates
This module can be configured and updated using
any Mac or PC.
€470.82
Now €447.28
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Related products
One-Touch Comfort-Softtop roof control for Convertible Ferrari 360 Spider and F430 Spider SmartTop
Code: STAFFI1
Information
The smartTOP roof control unit allows opening or closing the convertible top while driving at slow speeds.
It works similar to power-windows and opens or closes the roof automatically at the touch of a button. It is not necessary to stop the vehicle and pull the handbrake to operate the roof.
This Product Fits:
Ferrari 360 Spider
Ferrari 430 Spider
Remote control of convertible top
Open/Close your convertible top using the original factory remote control key / key fob.
Open/Close the top while driving
Never have to stop again for your top: Open/Close your top while driving. Speed programmable up to 40kmh.
One-Touch power convertible top
"One-Touch" convertible top operation allows your top to open or close automatically.
Individually programmable
Configure all functions of the module to meet your personal preferences via USB setup.
Passive / Invisible mode
Turn the whole module off with an easy key sequence. Ideal when letting someone else drive your car.
Reversible plug-in installation
Remove any time allowing sale or return of a leased vehicle in its original condition.
Separate window control
Raise and lower the windows separately by remote without activating the top.
Top convenience mode
Turning the ignition on or off does not interrupt convertible top operation.
Invert switch logic
Direction of center console top switch can be changed to "pull to open" and "push to close".
Comfort window close
One-Touch operation when closing all windows simultaneously via the separate driver's door switch.
Keyless Go top control
Open and close the top by touching the door handle three times.
Plug-n-Play Wiring harness
Custom designed plug-in-between wiring harness for extremely simple and quick installation included.
USB Port for easy setup / updates
This module can be configured and updated using
any Mac or PC.
It works similar to power-windows and opens or closes the roof automatically at the touch of a button. It is not necessary to stop the vehicle and pull the handbrake to operate the roof.
This Product Fits:
Ferrari 360 Spider
Ferrari 430 Spider
Remote control of convertible top
Open/Close your convertible top using the original factory remote control key / key fob.
Open/Close the top while driving
Never have to stop again for your top: Open/Close your top while driving. Speed programmable up to 40kmh.
One-Touch power convertible top
"One-Touch" convertible top operation allows your top to open or close automatically.
Individually programmable
Configure all functions of the module to meet your personal preferences via USB setup.
Passive / Invisible mode
Turn the whole module off with an easy key sequence. Ideal when letting someone else drive your car.
Reversible plug-in installation
Remove any time allowing sale or return of a leased vehicle in its original condition.
Separate window control
Raise and lower the windows separately by remote without activating the top.
Top convenience mode
Turning the ignition on or off does not interrupt convertible top operation.
Invert switch logic
Direction of center console top switch can be changed to "pull to open" and "push to close".
Comfort window close
One-Touch operation when closing all windows simultaneously via the separate driver's door switch.
Keyless Go top control
Open and close the top by touching the door handle three times.
Plug-n-Play Wiring harness
Custom designed plug-in-between wiring harness for extremely simple and quick installation included.
USB Port for easy setup / updates
This module can be configured and updated using
any Mac or PC.
€199.42
Now €189.45
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
ICarsoft Professional Diagnostic Tool CR Plus for Multi-brand Vehicles
Code: CRPLUS
Information
ICarsoft Professional Diagnostic Tool CR Plus for Multi-brand Vehicles
Please note: this is an electronic unit, once this is registered to the user or used it will not be able to return, ICarsoft will be able to give you product support should you require this.
iCarsoft CR Plus is a well built comprehensive diagnosis instrument by iCarsoft.It's not only including full function of OBDII/EOBD,but also support more function of Four system( Engine, automatic transmission, anti-lock braking system and airbag ) of certain models of car, such as read and clear code, multi languages, data flow picture display, graph. It also includes Electronic Parking Brake (EPB) release, Steering Angle Sensor (SAS) and Oil Service Light resets. View Engine, ABS, SRS along with A/T enhanced data
Features & Benefits:
• OBDII diagnostic full function
• Multiple car models (covering over 40 prevailing models from Asia, America and Europe).
• Support 4 Systems: Engine, Transmission, ABS, and Airbag.
• Basic diagnostic functions: read DTCs, clear DTCs, and read data stream
• Support DTCs help, data stream wave display, history data record and replay
• Online upgrade, you can download the latest version anytime anywhere.
• Auto module search
• Enhanced OBDII Mode 6
• Supports vehicles 1996 & newer ( OBDII & CAN )
• Retrieves generic P0, P2, P3 & U0 codes,
along with manufacturer specific P1, P3 & U1 codes – both permanent & pending
• Read & Clear Check Engine Lights
• Turn off MIL & reset monitors
• Displays DTC definitions right on the screen
• View freeze frame data & I/M Readiness monitor status
• Display live PCM data stream & O2 Sensor test data
• Graph, record & replay data in full color
• Resets Oil Service Light
• Brake Pads Reset
• Steering Angle Sensor Calibration
• Code cause / solution tips guide users to the root cause of trouble codes faster, saving diagnosis and repair time
• Retrieves vehicle information ( VIN, CIN and CVN )
Twelve Super Advantages:
1. Read & Clear DTCs
2. Read Data Stream
3. Full ECU Diagnosis
4. Diagnose Multi-brand Models Equipped With OBDII-16 DLC
5. Easy To Use With Metal Dome Keys
6. Oil Light/Service Reset
7.Brake Pads Reset
8.Steering Angle Sensor Calibration
9. 4.0" TFT LCD With 480 * 320 Pixels
10. USB 2.0 High Speed Upgrade
11. Upgrade Via TF Card
12. Multi-language: English, French, Spanish, German, Italian, Russian and Dutch.
And for more, refer to User's Manual.
Specifications:
• Display: 4.0" TFT LCD , with 480 * 320 Pixels
• Operation Temperature: 0℃ -- 50℃
• Storage Temperature: -20 ℃ -- 70 ℃
• Power: 9V -- 18V
• Operating current: 150mA@12V(Typical)
• Power consumption: 1.8W(Typical)
• Dimension: 205mm*110mm*31mm(LxWxH)
• Weight: 350g
OBDII function:
1. Read Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are
operating properly and are ready for Inspection and Maintenance testing.
4. Data Stream
5. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by
the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of
the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently
performed tests from the vehicle's on-board computer.
7. On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring
tests for specific components/systems.
8. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle's EVAP system.
Before using the system test function, refer to the vehicle's service repair manual to determine the procedures
necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification
number (CVN), and other information of the test vehicle.
Contents:
● Main Unit
● Hardcopy User's Manual
● Main cable
● USB cable
● TF Card
● Nylon carry case
● TF Card reader
Please note: this is an electronic unit, once this is registered to the user or used it will not be able to return, ICarsoft will be able to give you product support should you require this.
iCarsoft CR Plus is a well built comprehensive diagnosis instrument by iCarsoft.It's not only including full function of OBDII/EOBD,but also support more function of Four system( Engine, automatic transmission, anti-lock braking system and airbag ) of certain models of car, such as read and clear code, multi languages, data flow picture display, graph. It also includes Electronic Parking Brake (EPB) release, Steering Angle Sensor (SAS) and Oil Service Light resets. View Engine, ABS, SRS along with A/T enhanced data
Features & Benefits:
• OBDII diagnostic full function
• Multiple car models (covering over 40 prevailing models from Asia, America and Europe).
• Support 4 Systems: Engine, Transmission, ABS, and Airbag.
• Basic diagnostic functions: read DTCs, clear DTCs, and read data stream
• Support DTCs help, data stream wave display, history data record and replay
• Online upgrade, you can download the latest version anytime anywhere.
• Auto module search
• Enhanced OBDII Mode 6
• Supports vehicles 1996 & newer ( OBDII & CAN )
• Retrieves generic P0, P2, P3 & U0 codes,
along with manufacturer specific P1, P3 & U1 codes – both permanent & pending
• Read & Clear Check Engine Lights
• Turn off MIL & reset monitors
• Displays DTC definitions right on the screen
• View freeze frame data & I/M Readiness monitor status
• Display live PCM data stream & O2 Sensor test data
• Graph, record & replay data in full color
• Resets Oil Service Light
• Brake Pads Reset
• Steering Angle Sensor Calibration
• Code cause / solution tips guide users to the root cause of trouble codes faster, saving diagnosis and repair time
• Retrieves vehicle information ( VIN, CIN and CVN )
Twelve Super Advantages:
1. Read & Clear DTCs
2. Read Data Stream
3. Full ECU Diagnosis
4. Diagnose Multi-brand Models Equipped With OBDII-16 DLC
5. Easy To Use With Metal Dome Keys
6. Oil Light/Service Reset
7.Brake Pads Reset
8.Steering Angle Sensor Calibration
9. 4.0" TFT LCD With 480 * 320 Pixels
10. USB 2.0 High Speed Upgrade
11. Upgrade Via TF Card
12. Multi-language: English, French, Spanish, German, Italian, Russian and Dutch.
And for more, refer to User's Manual.
Specifications:
• Display: 4.0" TFT LCD , with 480 * 320 Pixels
• Operation Temperature: 0℃ -- 50℃
• Storage Temperature: -20 ℃ -- 70 ℃
• Power: 9V -- 18V
• Operating current: 150mA@12V(Typical)
• Power consumption: 1.8W(Typical)
• Dimension: 205mm*110mm*31mm(LxWxH)
• Weight: 350g
OBDII function:
1. Read Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are
operating properly and are ready for Inspection and Maintenance testing.
4. Data Stream
5. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by
the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of
the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently
performed tests from the vehicle's on-board computer.
7. On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring
tests for specific components/systems.
8. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle's EVAP system.
Before using the system test function, refer to the vehicle's service repair manual to determine the procedures
necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification
number (CVN), and other information of the test vehicle.
Contents:
● Main Unit
● Hardcopy User's Manual
● Main cable
● USB cable
● TF Card
● Nylon carry case
● TF Card reader
€182.90
Now €173.75
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
iCarsoft CR PRO Professional multi-system car diagnostic tool for multiple global car brand manufacturers.
Code: CRPRO
Information
iCarsoft CR PRO Professional multi-system car diagnostic tool for multiple global car brand manufacturers.
Works on all cars upto 2017 with OBDII port.
Please note: this is an electronic unit, once this is registered to the user or used it will not be able to return, ICarsoft will be able to give you product support should you require this.
ICARSOFT CR PRO SUPER ADVANTAGES:
• Diagnose Single Brand of most Models (OBDII-16DLC)
• Full System Diagnosis
• Read & Clear DTC
• Read Live Data
• Oil Service Reset
• Electronic Parking Brake (EPB) system maintenance
• Battery Management System (BMS)
• Diesel Particulate Filter (DPF) Regeneration Control System
• Electronic Throttle Control System (ETC)
• Steering Angle Sensor (SAS) Calibration
• Battery Test
• Data Review and Print
• Full Speed Upgrade via PC
• 4.0″ TFT LCD, 480*320 Pixels
• Multi-Language: English, German, Dutch, Spanish and French
ICARSOFT CR PRO OBDII FUNCTION FOR ALL CAR BRANDS
OBDII Function for all OBDII cars.
Read Codes | Read generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) permanent and pending Diagnostic Trouble Codes.
Erase Codes | Erase generic and manufacturer specific Diagnostic Trouble Codes.
Determine MIL | Turn off Check Engine Light (MIL) after clearing codes and reset monitors.
DataStream | Read live PCM DataStream. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
Freeze Frame Data | When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
I/M Readiness Test | Indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
O2 Sensor Test | This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
Evap System Test | The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
Battery test | Allows you getting the voltage of battery when the engine starts.
On-Board Monitoring | This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
Vehicle Information | Displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the vehicle.
Comprehensive Help | Including OBD Parameter, Mode Explanations, DTC search & More.
iCarsoft CR PRO OBDII Function supports most of the OBDII/EOBD test modes including CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
iCarsoft CR PRO OBDII Function works on most of 2001 and later European OBDII compliant PETROL vehicles and most of 2004 and later European OBDII compliant DIESEL vehicles.
ICARSOFT CR PRO FEATURES FOR GLOBAL CAR BRANDS
• iCarsoft CR PRO reads and clears trouble codes on most of the electronic systems such as engine, transmission, ABS, airbag etc.
• Support OBDII/EOBD (Ten Modes of Operation)
• Full ECU Diagnosis
• Oil Light/Service Reset
• Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for replacement and initialization
• Battery Management System (BMS) registers new battery to the BMS while battery replacement
• Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regen-eration process while DPF blockage and turn off the DPF indicator
• Electronic Throttle Control system (ETC) relearns the throttle va value while clear or replaces the throttle valve
• Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement
• Applies to most models which equipped with OBDII-16 DLC
iCarsoft CR PRO vehicle coverage for global car brands:
Acura | Alfa Romeo | Audi | BMW | Chrysler | Citroën | Dacia | Daewoo | Fiat | Ford | GM | Holden | Honda | Hyundai | Infiniti | Isuzu | Jaguar | Kia | LandRover | Lexus | Mazda | Mercedes-Benz | Mini | Mitsubishi | Nissan | Opel | Peugeot | Porsche | Renault | Saab | Scion | Seat | Skoda | Smart | Subaru | Suzuki | Toyota | Vauxhall | Volkswagen | Volvo
ICARSOFT CR PRO CONTENTS
• iCarsoft CR PRO scantool
• TF card with diagnostic software
• OBDII cable
• Users Manual
• PC Connecting cable
• Nylon Carry Case
Works on all cars upto 2017 with OBDII port.
Please note: this is an electronic unit, once this is registered to the user or used it will not be able to return, ICarsoft will be able to give you product support should you require this.
ICARSOFT CR PRO SUPER ADVANTAGES:
• Diagnose Single Brand of most Models (OBDII-16DLC)
• Full System Diagnosis
• Read & Clear DTC
• Read Live Data
• Oil Service Reset
• Electronic Parking Brake (EPB) system maintenance
• Battery Management System (BMS)
• Diesel Particulate Filter (DPF) Regeneration Control System
• Electronic Throttle Control System (ETC)
• Steering Angle Sensor (SAS) Calibration
• Battery Test
• Data Review and Print
• Full Speed Upgrade via PC
• 4.0″ TFT LCD, 480*320 Pixels
• Multi-Language: English, German, Dutch, Spanish and French
ICARSOFT CR PRO OBDII FUNCTION FOR ALL CAR BRANDS
OBDII Function for all OBDII cars.
Read Codes | Read generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) permanent and pending Diagnostic Trouble Codes.
Erase Codes | Erase generic and manufacturer specific Diagnostic Trouble Codes.
Determine MIL | Turn off Check Engine Light (MIL) after clearing codes and reset monitors.
DataStream | Read live PCM DataStream. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
Freeze Frame Data | When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
I/M Readiness Test | Indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
O2 Sensor Test | This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
Evap System Test | The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
Battery test | Allows you getting the voltage of battery when the engine starts.
On-Board Monitoring | This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
Vehicle Information | Displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the vehicle.
Comprehensive Help | Including OBD Parameter, Mode Explanations, DTC search & More.
iCarsoft CR PRO OBDII Function supports most of the OBDII/EOBD test modes including CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
iCarsoft CR PRO OBDII Function works on most of 2001 and later European OBDII compliant PETROL vehicles and most of 2004 and later European OBDII compliant DIESEL vehicles.
ICARSOFT CR PRO FEATURES FOR GLOBAL CAR BRANDS
• iCarsoft CR PRO reads and clears trouble codes on most of the electronic systems such as engine, transmission, ABS, airbag etc.
• Support OBDII/EOBD (Ten Modes of Operation)
• Full ECU Diagnosis
• Oil Light/Service Reset
• Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for replacement and initialization
• Battery Management System (BMS) registers new battery to the BMS while battery replacement
• Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regen-eration process while DPF blockage and turn off the DPF indicator
• Electronic Throttle Control system (ETC) relearns the throttle va value while clear or replaces the throttle valve
• Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement
• Applies to most models which equipped with OBDII-16 DLC
iCarsoft CR PRO vehicle coverage for global car brands:
Acura | Alfa Romeo | Audi | BMW | Chrysler | Citroën | Dacia | Daewoo | Fiat | Ford | GM | Holden | Honda | Hyundai | Infiniti | Isuzu | Jaguar | Kia | LandRover | Lexus | Mazda | Mercedes-Benz | Mini | Mitsubishi | Nissan | Opel | Peugeot | Porsche | Renault | Saab | Scion | Seat | Skoda | Smart | Subaru | Suzuki | Toyota | Vauxhall | Volkswagen | Volvo
ICARSOFT CR PRO CONTENTS
• iCarsoft CR PRO scantool
• TF card with diagnostic software
• OBDII cable
• Users Manual
• PC Connecting cable
• Nylon Carry Case
€241.90
Now €229.80
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery