do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
- Porsche 991.1 Turbo S 3.8L (560 Bhp) 2014-16
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "Drilled":
Drilled brake discs lead off the emerging braking heat faster than undrilled discs because of the high ventilation at the bigger radiation surface.
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 410 x 36 mm left
- Brake disc type drilled, front axle 410 x 36 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 390 x 30 mm left
- Brake disc type drilled, rear axle 390 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2120121
The product you are viewing cross references to these numbers
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.2 Carrera 2 3.0L 2024>>
- Porsche 992.2 Carrera 2S 3.0L 2024>>
- Porsche 992.2 Carrera T 3.0L 2024>>
- Porsche 992.2 Carrera 4S 3.0L 2024>>
Sold as a pair
Brake Disc Ø: 350mm
Brake Disc Thickness: 34mm
Upgrade the braking performance of your performance Porsche with DesignTek Carbon Ceramic Front Brake Discs — engineered for drivers who demand exceptional stopping power, consistent performance, and long-life durability on both road and track.
Fits:
Porsche 992.1 Carrera 2 3.0L 2019-24
Porsche 992.1 Carrera 4 3.0L 2019-24
Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
Porsche 992.2 Carrera 2 3.0L 2024>>
Crafted to be a direct OE-replacement fit, these carbon ceramic discs deliver a substantial enhancement over conventional cast iron brakes. They maintain consistent performance throughout a wide temperature range, resist fade under repeated hard use, and significantly reduce unsprung mass for improved vehicle dynamics.
Whether you’re pushing your Porsche hard on track days or seeking superior braking feel and reduced dust for aggressive street performance, DesignTek Carbon Ceramic Front Brake Discs offer a premium, precision-engineered solution.
Product Features:
- Carbon ceramic construction for high heat tolerance and fade-resistant braking
- Direct OE replacement fitment for vehicles originally equipped with carbon ceramic systems
- Lightweight design reduces unsprung and rotating mass for quicker response
- Exceptional thermal stability and wear resistance
- Designed for use with OE and compatible aftermarket calipers
- Pairs perfectly with DesignTek CCB-compatible brake pads (recommended)
- Ideal for high-performance road use and track performance driving
Important Fitment & Usage Notes:
- Carbon ceramic discs must be used with CCB-compatible brake pads — not standard iron-disc pads
- Compatible with OE and selected aftermarket calipers that are designed for carbon ceramic use
- Not suitable for use with pads or calipers that aren’t expressly rated for carbon ceramic applications
- Before ordering, please confirm caliper compatibility and pad selection to ensure optimal performance and safety.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
36040092CCF
The product you are viewing cross references to these numbers
- Porsche 992.2 Carrera 2S 3.0L 2024>>
- Porsche 992.2 Carrera 2 GTS / Spirit 70 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
This Ninemeister front carbon-ceramic brake disc kit is designed for Porsche 992.2 Carrera S and GTS models from 2024 onwards. It provides a two-piece replacement option for cars using PCCB carbon-ceramic brakes with option code M450 and is also specified as a direct replacement for the corresponding steel front discs. Sold as a pair
Fits
- Porsche 992.2 Carrera 2S 3.0L 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
What This Product Does
The discs provide the friction surfaces required by the front braking system while managing the heat generated during repeated brake applications. Their carbon-ceramic construction combines low mass with thermal stability, while the floating two-piece design allows the disc and centre bell to respond separately to temperature changes.
Functions
- Replaces the original front PCCB or corresponding steel brake discs
- Provides a stable friction surface for compatible brake pads
- Manages repeated braking heat through carbon-ceramic construction
- Reduces rotating and unsprung mass compared with many cast-iron discs
- Uses a floating connection between the rotor and centre bell
- Produces less brake dust than a conventional cast-iron disc and pad combination
Technical Details
- Front brake disc kit
- Disc dimensions: 410 x 36mm
- Two-piece floating construction
- Carbon-fibre long-strand rotor reinforced with silicon carbide
- CNC-machined 7075-T6 billet aluminium centre bells with a hard-anodised finish
- Published weight: 7kg
Symptoms of Fault
- Brake judder or pedal pulsation
- Cracking, chipping or other visible rotor damage
- Scoring or deterioration of the friction surface
- Heat spots or uneven disc condition
- Reduced disc thickness or excessive wear
- Uneven braking response or abnormal pad wear
Why Replacement Matters
Carbon-ceramic discs should be replaced when inspection identifies damage, excessive wear or deterioration outside the permitted service limits. Renewing damaged front discs helps restore an even working surface for the pads and consistent operation across the front axle. Ninemeister applies specialist Porsche experience to braking upgrades intended for demanding road and track applications. Discs should be inspected and fitted by a suitably experienced technician, with compatible pads, hardware and the correct bedding-in procedure confirmed before use.
FAQs
- Are these discs intended for PCCB-equipped cars?
Yes. They are specified as direct replacements for OEM PCCB front discs with option code M450. - Can they replace steel front discs?
The manufacturer also specifies the kit as a direct replacement for the corresponding steel disc arrangement. Confirm the vehicle's brake specification before fitting. - What size are the discs?
Each disc specification is 410mm in diameter and 36mm thick. - Should both front discs be renewed together?
Brake discs are normally serviced as an axle pair to maintain matching condition across the front braking system. - Are brake pads and fitting hardware included?
The supplied product information does not confirm these items. Check the kit contents and select compatible pads and hardware before installation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9M992615301AC
The product you are viewing cross references to these numbers
- Porsche 992.2 Carrera 2S 3.0L 2024>>
- Porsche 992.2 Carrera 2 GTS / Spirit 70 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
Rear Carbon-Ceramic Brake Disc Upgrade Kit by Ninemeister for Porsche 992.2 Carrera S and GTS models from 2024 onwards. These two-piece floating rear discs provide a direct-fit carbon-ceramic replacement for compatible PCCB (M450) and steel-disc brake configurations. Sold as a pair
Fits
- Porsche 992.2 Carrera 2S 3.0L 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
What This Product Does
The discs provide the rear friction surfaces required to convert vehicle movement into heat during braking. Their carbon-fibre and silicon-carbide construction is designed to manage repeated heat cycles while reducing rotating and unsprung mass compared with conventional cast-iron discs. The floating arrangement allows controlled expansion between the rotor and centre bell.
Functions
- Provides compatible rear braking surfaces for the specified Porsche 992.2 applications
- Manages heat generated during repeated braking
- Reduces unsprung and rotating mass
- Allows controlled thermal expansion through a two-piece floating design
- Produces less brake dust than a conventional cast-iron disc and matching pad combination
Technical Details
- Rear disc size: 390 x 32mm
- Manufacturer-listed weight: 6.4kg
- Two-piece floating carbon-ceramic construction
- Carbon-fibre long-strand material reinforced with silicon carbide
- CNC-machined 7075-T6 billet centre bells with a hard-anodised finish
- Designed as a direct-fit replacement for compatible PCCB M450 or steel rear discs
Symptoms of Fault
- Cracks, chips or other visible rotor damage
- Brake judder or vibration during deceleration
- Uneven braking response or abnormal pad wear
- Disc measurements at or beyond the specified wear limit
- Warning messages or braking behaviour requiring specialist diagnosis
Why Replacement Matters
Damaged or worn brake discs can affect pad contact, braking consistency and pedal response. Replacement should follow inspection of both rear discs, the compatible brake pads, calipers, sensors and associated fitting hardware. Ninemeister develops Porsche-focused components using specialist experience with road and track-oriented braking systems.
FAQs
- Can these replace Porsche PCCB discs? They are designed as a direct-fit rear replacement for compatible Porsche Ceramic Composite Brake systems with option code M450.
- Can they replace steel brake discs? The manufacturer also identifies them as a direct replacement for compatible steel-disc configurations. Confirm the vehicle's original brake specification before fitting.
- Are brake pads included? Kit contents beyond the rear discs are not specified. Confirm the required compatible pads and fitting components separately.
- Is specialist installation recommended? Brake-system work should be completed by a suitably qualified technician, followed by the correct inspection and bedding procedure.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9M992615601A
The product you are viewing cross references to these numbers
- Porsche 992.2 Carrera 2S 3.0L 2024>>
- Porsche 992.2 Carrera 2 GTS / Spirit 70 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
Front carbon-ceramic brake disc and brake pad package by Ninemeister for Porsche 992.2 Carrera 2S, Carrera 2 GTS and Carrera 4 GTS models from 2024 onwards. It combines two-piece floating front discs with a compatible low-metallic road pad compound.
Fits
- 992.2 Carrera 2S 3.0L 2024>>
- 992.2 Carrera 2 GTS 3.6L 2024>>
- 992.2 Carrera 4 GTS 3.6L 2024>>
What This Product Does
This package provides matched front carbon-ceramic friction components for replacing worn or damaged discs and pads. The discs are designed as direct replacements for the OEM PCCB carbon-ceramic system with option code M450, while Ninemeister also identifies the discs as suitable steel-disc replacements. The included pad specification is intended solely for use with carbon-ceramic brake discs.
Functions
- Renews the front brake disc and pad friction surfaces together.
- Provides a compatible road pad compound for carbon-ceramic discs.
- Supports consistent low-to-medium friction characteristics.
- Reduces unsprung weight compared with conventional cast-iron discs.
- Uses a floating two-piece construction to accommodate repeated thermal cycles.
- Produces less brake dust than a typical cast-iron disc and pad combination.
Technical Details
- Front disc dimensions: 410 × 36 mm.
- Two-piece floating carbon-ceramic disc construction.
- Carbon-fibre long-strand material reinforced with silicon carbide.
- CNC-machined 7075-T6 billet aluminium centre bells with a hard-anodised finish.
- Manufacturer-stated disc weight: 7 kg.
- Road pads use a low-metallic, resin-bonded material containing steel and aramid fibres.
Symptoms of Fault
- Brake judder or vibration through the pedal or steering wheel.
- Reduced initial brake response or an inconsistent pedal feel.
- Visible disc chipping, cracking or surface deterioration.
- Brake pads approaching their wear limit.
- Unusual squealing, scraping or grinding noises.
- Uneven wear across the front brake components.
Why Replacement Matters
Carbon-ceramic discs and their matching pads should be inspected as a complete friction system. Renewing compatible discs and pads together helps avoid mixing unsuitable compounds and provides a consistent maintenance baseline across the front axle. Calipers, wear sensors, hoses and fitting hardware should also be inspected before installation. Follow the brake component manufacturer’s bedding-in procedure after fitting.
FAQs
- Are the pads compatible with iron brake discs?
No. Ninemeister specifies these road pads for carbon-ceramic brake discs only. - What size are the front discs?
Each disc specification is 410 × 36 mm. - Does this package replace the original PCCB system?
The discs are identified as direct replacements for OEM PCCB front discs with option code M450. - Are wear sensors and fitting hardware included?
These items are not specified, so compare the package contents with the vehicle and planned installation before work begins. - Should the brakes be bedded in?
Yes. Use the procedure supplied for the discs and pad compound and avoid heavy braking until bedding-in is complete.
This kit is comprised of the following items:
