Rear upper centre track control arm, SET OF 2. Porsche 970 Panamera 2010-16 - 97033104700
97033104700/1KIT
Vehicle Group
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
Information
Rear upper centre track control arm set, Ref No. 97033104700.
This Set of 2 includes two 97033104700 control arms — enough for both sides of the rear axle for the Porsche Panamera (970 series). Each arm is manufactured to the same exacting standards, so that left and right sides operate in harmony with equal performance characteristics. This paired set is perfect for a full rear-axle refresh, ensuring matched components and consistent handling.
SET OF 2, for both sides (left and right).
Fits:
Porsche 970.1 Panamera 2010 - 2013 all models
Porsche 970.2 Panamera 2014 - 2016 all models
Diagram ref no 9
• Position on Vehicle: Rear suspension, both upper outer or upper inner arms (as appropriate) for full-axle replacement.
• Applications: Ideal when replacing suspension components on both sides to maintain symmetry, avoid mismatched parts, ensure uniform ride and handling behaviour across the rear axle.
Replacing only one side can lead to mismatched suspension behaviour where one arm is new and the other is old, resulting in uneven wear, asymmetric handling or poor alignment outcomes. A full-set ensures both sides work identically, delivering harmonised performance and maximising the service life of the rear suspension system.
When to replace both:
• Both arms show wear or have original bushings and you want uniform performance.
• Undergoing major rear suspension service where access is granted to both sides.
• Addressing rear-end instability, asymmetric tyre wear or suspension misalignment.
• High-mileage vehicle where the rear suspension components across both sides are approaching end-of-life together.
• Preventative replacement to avoid repeated labour and downtime.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97033104700
The product you are viewing cross references to these numbers
This Set of 2 includes two 97033104700 control arms — enough for both sides of the rear axle for the Porsche Panamera (970 series). Each arm is manufactured to the same exacting standards, so that left and right sides operate in harmony with equal performance characteristics. This paired set is perfect for a full rear-axle refresh, ensuring matched components and consistent handling.
SET OF 2, for both sides (left and right).
Fits:
Porsche 970.1 Panamera 2010 - 2013 all models
Porsche 970.2 Panamera 2014 - 2016 all models
Diagram ref no 9
• Position on Vehicle: Rear suspension, both upper outer or upper inner arms (as appropriate) for full-axle replacement.
• Applications: Ideal when replacing suspension components on both sides to maintain symmetry, avoid mismatched parts, ensure uniform ride and handling behaviour across the rear axle.
Replacing only one side can lead to mismatched suspension behaviour where one arm is new and the other is old, resulting in uneven wear, asymmetric handling or poor alignment outcomes. A full-set ensures both sides work identically, delivering harmonised performance and maximising the service life of the rear suspension system.
When to replace both:
• Both arms show wear or have original bushings and you want uniform performance.
• Undergoing major rear suspension service where access is granted to both sides.
• Addressing rear-end instability, asymmetric tyre wear or suspension misalignment.
• High-mileage vehicle where the rear suspension components across both sides are approaching end-of-life together.
• Preventative replacement to avoid repeated labour and downtime.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97033104700
97033104700
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Rear upper centre track control arm. Porsche 970 Panamera 2010-16 (97033104700/1
Price: £100.00
In stock
Related products
Information
Rear control arm hexagon head bolt, M 14 X 100.
Designed for the rear axle control arm on Porsche 996 and 997, it provides exact factory fit, strength, and corrosion resistance.
Sold each.
Fits:
Porsche 996 1998 - 2005
Porsche 997.1 2005 - 2008
Porsche 997.2 2009 - 2012
Diagram ref no 18
Thread size / spec: M14 × 1.5 × 100 mm
Supersession: Part 90037805109 is superseded by 90037805101
This bolt secures the rear suspension control arm to the wheel carrier or subframe, providing the clamping force needed to maintain accurate suspension alignment and minimize movement under load.
Over years of service, high torque loads, vibration, and exposure to road conditions can weaken or corrode suspension bolts. A compromised bolt may lead to improper alignment, handling instability, or noise under braking and cornering.
When to replaces:
• During control arm replacement, alignment service, or rear suspension rebuilds
• If original bolts show corrosion, stretching, or thread wear
• As part of preventive maintenance when reassembling load-bearing suspension joints
Replacing with Genuine Porsche hardware ensures structural integrity, precise fit, and lasting performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90037805101
The product you are viewing cross references to these numbers
Designed for the rear axle control arm on Porsche 996 and 997, it provides exact factory fit, strength, and corrosion resistance.
Sold each.
Fits:
Porsche 996 1998 - 2005
Porsche 997.1 2005 - 2008
Porsche 997.2 2009 - 2012
Diagram ref no 18
Thread size / spec: M14 × 1.5 × 100 mm
Supersession: Part 90037805109 is superseded by 90037805101
This bolt secures the rear suspension control arm to the wheel carrier or subframe, providing the clamping force needed to maintain accurate suspension alignment and minimize movement under load.
Over years of service, high torque loads, vibration, and exposure to road conditions can weaken or corrode suspension bolts. A compromised bolt may lead to improper alignment, handling instability, or noise under braking and cornering.
When to replaces:
• During control arm replacement, alignment service, or rear suspension rebuilds
• If original bolts show corrosion, stretching, or thread wear
• As part of preventive maintenance when reassembling load-bearing suspension joints
Replacing with Genuine Porsche hardware ensures structural integrity, precise fit, and lasting performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90037805101
90037805101
90037805109
The product you are viewing cross references to these numbers
Price: £13.19
In stock
Vehicle Group
- Porsche 991.1 Carrera C2 3.4L (350Bhp) 2012-16
- Porsche 991.1 Carrera C2S 3.8L (400Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350Bhp) 2012-16
- Porsche 991.1 Carrera C4S 3.8L (400Bhp) 2012-16
- Porsche 991.1 Turbo 3.8L (520bhp) 2014-16
- Porsche 991.1 Turbo S 3.8L (560Bhp) 2014-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
Information
Control arm lower, Rear.
Fits:
Porsche 991.1 2016 >> (Cars produced from week 45 onwards)
Porsche 991.2 2017>>
Porsche 991 Turbo 2016>> (Cars produced from week 45 onwards)
Click 'Zoom in' for large parts diagram.
Diagram ref no 20
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99133104
The product you are viewing cross references to these numbers
Fits:
Porsche 991.1 2016 >> (Cars produced from week 45 onwards)
Porsche 991.2 2017>>
Porsche 991 Turbo 2016>> (Cars produced from week 45 onwards)
Click 'Zoom in' for large parts diagram.
Diagram ref no 20
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99133104
99133104420
99133104320
The product you are viewing cross references to these numbers
Prices from: £203.25
Vehicle Group
- Porsche 991.1 Carrera C2 3.4L (350Bhp) 2012-16
- Porsche 991.1 Carrera C2S 3.8L (400Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350Bhp) 2012-16
- Porsche 991.1 Carrera C4S 3.8L (400Bhp) 2012-16
- Porsche 991.1 Turbo 3.8L (520bhp) 2014-16
- Porsche 991.1 Turbo S 3.8L (560Bhp) 2014-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
Information
Control arm upper, Rear. Fits left and right side.
Fits:
Porsche 991.1 2012-16
Porsche 991.2 2017>>
Porsche 991 Turbo 2014>>
Click 'Zoom in' for large parts diagram.
Diagram ref no 14
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99133106104
The product you are viewing cross references to these numbers
Fits:
Porsche 991.1 2012-16
Porsche 991.2 2017>>
Porsche 991 Turbo 2014>>
Click 'Zoom in' for large parts diagram.
Diagram ref no 14
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99133106104
99133106104
The product you are viewing cross references to these numbers
Price: £189.67
Orderable