do not press the back button…
-
Engine Parts
-
- Engine Cooling Coolant Hoses and Pipes (Front engine cars) Coolant Hoses and Pipes (Rear engine cars) Water / Coolant Radiators Track & Race Coolant Radiators Water / Coolant Pumps Coolant Bottles / Expansion Tanks Thermostat / Temperature Sensor Oil Radiators / Heat Exchangers Engine Oil Coolant / Antifreeze
-
- Engine Rebuild Parts Oil System Parts Fuel System Parts Gaskets & Sets Belts / Tensioners / Rollers Chains & Tensioners Engine Bearings / Shells Engine Valves / Guides / Springs Engine Bolts / Studs Engine Mounts Engine Cylinders / Liners / Pistons Connecting Rod Cylinder Head / Camshaft Carrier Camshaft covers / Gaskets Crankcase Parts Crankshaft & Parts Air Intake & Injection Specialist Tools
-
-
Brakes
-
- Brakes Brake Pads & Disc Package Brake Disc Standard Brake Pads Standard SPORTS Brake Disc Brembo Standard brakes Brembo Racing brakes TEXTAR Brakes PAGID Racing Brakes Zimmermann Brakes Performance Friction Brakes Giro Slotted Brake Disc SHW Performance Brakes O-Brake Brake Discs Replacement for Ceramic Disc Brake Pad Wear Sensors Brake Pad Anti-vibration shims Caliper Bolts / Disc Screws Pin Kit and Guide Plates Performance Brake Hoses Standard Brake Hoses Caliper and Brake Lines Brake Calipers All Categories
-
-
Suspension & Steering
-
- Steering Parts Steering Racks Steering Gaiter Track Rods
-
-
Transmission
-
- Gearbox / Transmission Clutch Friction Plate Clutch Pressure Plate Clutch Bolts Gearbox Parts Driveshafts & Parts Gasket Sets / Gaskets / Seals / Lock Nuts Gearbox Mounts Gearshift Control Parts Flywheel / Torque CV Joints Kits CV Boots and Kits Cardan Shaft / Prop Shaft Transmission Parts Gearbox / Differential Oil Gearbox Sump / Oil Pan Rear Differential Transmission Cooling
-
- Cooling & Heating
-
Electrical & Lighting
-
- Electrical & Relays Hazard Warning Switch Handbrake Switch Reverse Light Switch Window Switch Window Mechanism Electric Horn Ignition Switch Seat Switch Relays / Fuses Washer pumps / bottles / jets Alarms / Security / Central Locking Electronic Control Units Dashboard / Console Parts & Switches Door Mirror Switch Air Bags & Parts Tracker Cruise Control Connector housing Wiring harness
-
-
Body & Exhaust
-
- Chassis / Bodywork Restoration Chassis / Repair Panels Front Lid Damper Rear Lid Damper Bonnets / Locks & Latches Rear lid / Tailgate Bumpers Front Bumpers Rear Door Handles | Locks | Keys Door Panels | Hinges | Striker Plates Window Lifters | Motors Wings Front & Parts Side Sill Panels Exterior Chassis Mouldings Mirrors & Parts Stone Chip Foils / Stickers Undertrays Chassis & Engine Front Wiper Arms & Blades Rear Wiper Arms & Blades Wheel Arch Liners & Covers Roof - Cabrio / Targa / Coupe / Speedster Roll Cages Plastic Covers All Categories
-
-
Lubricants & Fluids
-
- Service Parts Oil Filters Air Filters Pollen/Particle Filters Belts All Types Spark Plugs Ignition Coils Front Wiper Arms & Blades Rear Wiper Arms & Blades Gearbox Service Parts Engine Oil & Lubricants - Mobil Engine Oil & Lubricants - Total Engine Oil & Lubricants - Castrol Engine Oil & Lubricants - Motul Engine Oil & Lubricants - Millers Oils NanoDrive Engine Oil & Lubricants - Millers Oils Engine Oil & Lubricants - LIQUI MOLY Fuel Additives Coolant / Antifreeze Garage PPE
-
-
All Parts
-
- Parts Accessories Chassis / Bodywork Brakes Clothing & Gifts Electrical & Relays Engine Cooling Engine Electrical Engine Rebuild Parts Engine Tuning Exhausts Exterior Styling / Spoilers Gearbox / Transmission Heating / Air Conditioning Hydraulics Interior & Accessories Incar / Multimedia Lighting Mats & Carpets Motorsport and Off-Road Parts for Other Cars Pedal Cluster Rubber Seals All Categories
-
- Back to main website
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Front Bumper Radiator Wire Mesh Kit. Porsche 95B.3 Macan S / GTS 2022-26 › 22MACANGTS
- Porsche 95B.3 Macan S Petrol 2.9L V6 (380Bhp) 2022>>
- Porsche 95B.3 Macan GTS Petrol 2.9L V6 (440Bhp) 2022>>
Radiator Grille Set
Protect one of the most vulnerable areas of your Porsche
Macan while enhancing its appearance with this premium Radiator Grille Set,
designed specifically for the Porsche Macan S and Macan GTS (2022–2026).
Engineered to fit the facelift front bumper perfectly, these high-quality
aluminium mesh grilles provide outstanding protection for your radiators and
intercoolers without compromising airflow or factory styling.
Fits:
- Porsche 95B.3 Macan S Petrol 2.9L V6 (380Bhp) 2022>>
- Porsche 95B.3 Macan GTS Petrol 2.9L V6 (440Bhp) 2022>>
The standard Macan front bumper features large, open side air intakes that maximise cooling but leave expensive cooling components exposed to stones, road debris, leaves and insects. This grille kit provides an effective barrier against everyday hazards while delivering a clean OEM+ appearance that complements Porsche's distinctive design language.
What Do Radiator Grilles Do?
Radiator grilles act as a protective shield for the cooling
system, preventing debris from reaching the radiators and intercoolers
positioned directly behind the front bumper openings. Their primary functions
include:
- Protecting radiators and intercoolers from stone impacts.
- Preventing leaves, insects and road debris from clogging cooling fins.
- Maintaining unrestricted airflow for efficient engine cooling.
- Helping reduce the risk of costly radiator repairs.
- Enhancing the appearance of the front bumper with a factory-inspired finish.
This simple upgrade provides long-term protection for critical cooling components without affecting normal vehicle operation.
Why Are Radiators Vulnerable?
The open intake design on the Porsche Macan allows
unrestricted airflow but also exposes delicate aluminium cooling fins to
damage. Common issues include:
- Stone chips puncturing radiator cores.
- Bent cooling fins reducing cooling efficiency.
- Dirt, leaves and insects restricting airflow.
- Corrosion accelerated by trapped road debris and moisture.
- Expensive repairs caused by coolant leaks following impact damage.
Installing protective radiator grilles significantly reduces the likelihood of this type of damage while helping to maintain optimum cooling performance.
When Should Radiator Grilles Be Installed?
Radiator grilles are best fitted as a preventative upgrade,
ideally from new or immediately after replacing damaged radiators. They are
particularly recommended for vehicles that regularly experience:
- Motorway driving.
- Country roads with loose gravel.
- Track days.
- Winter driving conditions.
- Frequent long-distance touring.
Protecting your cooling system before damage occurs can save significant repair costs over the life of the vehicle.
Quick & Simple Installation
Designed with the enthusiast in mind, this grille kit
installs quickly without requiring bumper removal, drilling or permanent
modifications.
- No specialist tools required.
- Straightforward DIY installation.
- Fully reversible if required.
- Factory-quality fit and finish.
What's Included?
Each kit contains:
- Left-hand radiator grille.
- Right-hand radiator grille.
- Complete fitting kit where applicable.
Everything required to protect both front side radiator openings for a clean, symmetrical installation.
- Porsche 991.1 R 4.0L (500 Bhp) 2016
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
Fits:
Porsche 991.2 Carrera 2017>>
Porsche 991.2 Turbo / S 2017>>
Note: If you have the Sport Design package, be sure to select the Sport Design option under model, regardless of which 991 model you have.
One of Porsche's biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install a Rennline Radiator Protection Grill Kit.
Why Rennline kits are the best:
• Rennline developed the "Original" Radiator protection system with years of proven results
• Your car's nose already looks perfect, our kits install behind the louvers to retain a desired factory look
• No risk of paint damage due to misalignment or loose components like front mounted kits
• Rigid mount system that executes a true "protection system" not just aesthetic
• Unique screw and clip (some vehicle's don't require the clips, and simply install with screws) system that eliminates the need for adhesive, zip ties or other unreliable fastening technics.
• Powder coated aluminum resulting in the ultimate oxidation protection
• Millions of track miles and winning races have proven our mesh size will not affect airflow or cooling
• Every grill is pre-molded for your specific model resulting in a perfect fit every time
• Easy install, most kits take a total of an hour or less to install with basic hand tools. If removing your bumper cover seems intimidating, don't worry, average bumper removal time without a car lift is 10-15 mins
• Manufactured in the USA by Rennline.
* Cars with adaptive cruise control may require minor trimming with snips or scissors.
Please note : ** If you select "No" to "Center Radiator", you will not receive a center screen as there is no place to affix it, and there is no functional reason to install it. If you plan to add a third radiator kit down the road, select "Yes" for this question.
Pictures may not reflect actual application.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
E10002
The product you are viewing cross references to these numbers
- Porsche 991.1 R 4.0L (500 Bhp) 2016
- Porsche 991.1 GT3 3.8L (475 Bhp) 2014-16
- Porsche 991.1 GT3 RS 4.0L (500 Bhp) 2015-16
Fits:
Porsche 991 GT3 2014-17
Porsche 991 GT3 RS 2014-21
Porsche 991 R 2014-21
Click 'Zoom in' for large parts diagram.
Diagram ref no 5
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99150571
The product you are viewing cross references to these numbers
- Porsche 991.1 R 4.0L (500 Bhp) 2016
- Porsche 991.1 GT3 3.8L (475 Bhp) 2014-16
- Porsche 991.1 GT3 RS 4.0L (500 Bhp) 2015-16
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
Fits:
Porsche 991 R / GT3 / GT3 2013-17
Click 'Zoom in' for large parts diagram.
Diagram ref no 7
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99150571191
The product you are viewing cross references to these numbers
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed