do not press the back button…
-
Engine Parts
-
- Engine Electrical Batteries & Chargers Ignition Coil Speed / Reference / Knock Sensors Throttle Body
-
- Engine Rebuild Parts Oil System Parts Fuel System Parts Gaskets & Sets Radial Seal / RMS / Camshaft / Balance shaft Belts / Tensioners / Rollers Chains & Tensioners Engine Bearings / Shells Engine Bolts / Studs Engine Cylinders / Liners / Pistons Connecting Rod Cylinder Head / Camshaft Carrier Crankcase Parts Crankshaft & Parts Turbo Chargers / Intercoolers & Parts Air Intake & Injection Specialist Tools
-
Brakes
-
- Brakes Brake Pads & Disc Package SPORTS Brake Pads & Disc Package Brake Disc Standard Brake Pads Standard SPORTS Brake Disc Brembo Standard brakes Brembo Racing brakes TEXTAR Brakes PAGID Racing Brakes Zimmermann Brakes Giro Slotted Brake Disc SHW Performance Brakes EBC Brakes Replacement for Ceramic Disc Brake Pad Wear Sensors Brake Pad Anti-vibration shims Caliper Bolts / Disc Screws Pin Kit and Guide Plates Performance Brake Hoses Standard Brake Hoses Caliper and Brake Lines Brake Calipers All Categories
-
- Suspension & Steering
- Transmission
-
Cooling & Heating
-
- Heating / Air Conditioning Air con condensers & desiccators Blower Motors & Fans
-
- Electrical & Lighting
-
Body & Exhaust
-
- Chassis / Bodywork Restoration Chassis / Repair Panels Bonnets / Locks & Latches Boots / Rear Lid / Locks and Latches Bumpers Front Bumpers Rear Door Handles | Locks | Keys Door Panels | Hinges | Striker Plates Mirrors & Parts Stone Chip Foils / Stickers Front Wiper Arms & Blades Rear Wiper Arms & Blades Roof - Cabrio / Targa / Coupe / Speedster Plastic Covers Engine Covers Front screen Rear screen Front side glass Rear side glass Fastenings & Fixings
-
-
Lubricants & Fluids
-
- Service Parts Oil Filters Air Filters Belts All Types Spark Plugs Ignition Coils Front Wiper Arms & Blades Rear Wiper Arms & Blades Gearbox Service Parts Engine Oil & Lubricants - Mobil Engine Oil & Lubricants - Total Engine Oil & Lubricants - Castrol Engine Oil & Lubricants - Motul Engine Oil & Lubricants - Millers Oils NanoDrive Engine Oil & Lubricants - Millers Oils Fuel Additives Garage PPE
-
-
All Parts
-
- Parts Accessories Chassis / Bodywork Brakes Clothing & Gifts Electrical & Relays Engine Cooling Engine Electrical Engine Rebuild Parts Engine Tuning Exhausts Exterior Styling / Spoilers Gearbox / Transmission Heating / Air Conditioning Hydraulics Interior & Accessories Incar / Multimedia Lighting Mats & Carpets Motorsport and Off-Road Parts for Other Cars Pedal Cluster Rubber Seals All Categories
-
- Back to main website
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Lambda Probe For Turbocharger. Porsche 95B Macan 2.0L Petrol 2014-18 ❭ PAC906262A
- Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
Restore accurate exhaust-gas monitoring and dependable engine-management operation with this OE Match Lambda Probe for Turbocharger. Designed for compatible turbocharged Porsche applications, this lambda probe monitors oxygen content within the exhaust gases and supplies this information to the engine control unit (ECU).
Fits:
- Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
Diagram Ref No 13
Also known as an oxygen sensor, O2 sensor or lambda sensor, the probe operates within the high-temperature turbocharger and exhaust environment. Accurate lambda information helps the engine-management system monitor combustion conditions, manage fuelling where applicable and maintain effective emissions-system operation.
Turbocharged engines place particularly high demands on exhaust-system sensors. Extreme temperatures, vibration, rapid thermal cycling and combustion deposits can gradually cause a lambda probe to become contaminated, slow to respond or electrically defective.
A deteriorating sensor may continue to produce a signal while no longer responding accurately enough for reliable engine management. The internal heater circuit, wiring and electrical connector can also suffer from age and prolonged heat exposure.
This OE Match Lambda Probe provides a high-quality replacement for a confirmed faulty, contaminated or slow-response sensor.
What This Product Does:
- Measures oxygen content within the exhaust gases.
- Sends exhaust-condition information to the ECU.
- Helps the engine-management system monitor combustion.
- Supports accurate air-fuel mixture management where applicable.
- Helps identify rich or lean operating conditions.
- Supports efficient turbocharged engine operation.
- Helps maintain controlled exhaust emissions.
- Provides information for onboard diagnostics.
- Supports correct emissions-system operation.
- Helps protect exhaust and catalyst components from incorrect running conditions.
- Operates within the high-temperature turbocharger/exhaust environment.
- Replaces a slow, contaminated, inaccurate or failed lambda probe.
- Provides a Porsche replacement component for compatible applications.
- Check engine or engine-management warning light.
- Lambda or oxygen-sensor diagnostic fault codes.
- Rich or lean mixture fault codes.
- Increased fuel consumption.
- Rough or unstable idle.
- Engine hesitation.
- Poor throttle response.
- Reduced engine performance.
- Inconsistent power delivery.
- Engine misfires.
- Increased exhaust emissions.
- Failed emissions test.
- Strong fuel smell from the exhaust.
- Slow lambda response during diagnostic testing.
- Implausible oxygen-sensor readings.
- Intermittent sensor signals.
- Lambda sensor heater circuit faults.
- Damaged or heat-affected wiring.
- Corroded or damaged electrical connectors.
Why Replacement Matters:
- The lambda probe provides the ECU with important information about conditions within the exhaust system.
- A sensor does not always fail suddenly. As it deteriorates, it may continue generating a signal but become increasingly slow or inaccurate.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PAC906262A
The product you are viewing cross references to these numbers
- Porsche 992.2 Carrera 2 3.0L 2024>>
- Porsche 992.2 Carrera 2S 3.0L 2024>>
- Porsche 992.2 Carrera T 3.0L 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 2 3.0L Cabriolet 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Targa 4 GTS 3.6L 2024>>

Fits:
Porsche 991.2 Carrera (In front of catalyst)
Cars with and without petrol particulate filter.
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9A260618803
The product you are viewing cross references to these numbers
- Porsche 992.2 Carrera 2 3.0L 2024>>
- Porsche 992.2 Carrera 2S 3.0L 2024>>
- Porsche 992.2 Carrera T 3.0L 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 2 3.0L Cabriolet 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Targa 4 GTS 3.6L 2024>>

Fits:
Porsche 991.2 Carrera (In front of catalyst)
Cars with and without petrol particulate filter.
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9A260618803
The product you are viewing cross references to these numbers
- Porsche 992.2 Carrera 2 3.0L 2024>>
- Porsche 992.2 Carrera 2S 3.0L 2024>>
- Porsche 992.2 Carrera T 3.0L 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 2 3.0L Cabriolet 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Targa 4 GTS 3.6L 2024>>

Fits:
Porsche 991.2 Carrera (In front of catalyst)
Cars with and without petrol particulate filter.
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9A260618803
The product you are viewing cross references to these numbers
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed