Inlet plenum - GT3 Retrofit kit. Porsche 997.1 Turbo 2007-2009 - TR-150-GT3-KIT
TR-150-GT3-KIT
Vehicle Group
- Porsche 997 TURBO 2007>>
Information
DO88 Inlet plenum - GT3 Retrofit kit.
To fit:
Porsche 997.1 Turbo models 2007-2009, using the DO88 TR-150 OEM throttle body
This conversion kit allows customers already using our 997.1 DO88 throttle body in the OEM 74mm size to purchase the fittings to upgrade to using a larger GT3 82mm throttle body.
Includes all parts that are different between the OEM and GT3 size kits.
• Larger silicone hose
• 4 fixing bolts
• Replacement seal
• New hose clips
When making this conversion, the oem size spacer plate is no longer used.
To fit:
Porsche 997.1 Turbo models 2007-2009, using the DO88 TR-150 OEM throttle body
This conversion kit allows customers already using our 997.1 DO88 throttle body in the OEM 74mm size to purchase the fittings to upgrade to using a larger GT3 82mm throttle body.
Includes all parts that are different between the OEM and GT3 size kits.
• Larger silicone hose
• 4 fixing bolts
• Replacement seal
• New hose clips
When making this conversion, the oem size spacer plate is no longer used.
Price: €83.26
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery
Related products
Race plenum and throttle body. Porsche 997 Turbo 07-09
Code: AP-997TT-105
Vehicle Group
- Porsche 997 TURBO 2007>>
- Porsche 997 MKII Turbo 2009>>
Information
Race plenum and throttle body.
Fits:
Porsche 997 Turbo 2007-09
Adding bolt-on horsepower to the 997 Turbo is a continuous quest by many enthusiasts looking for more power. Reverting back to old tuning technologies, Agency Power has developed a larger throttle body and plenum kit for the Porsche 997 Turbo to gain added performance. The point of a larger throttle body is to get in more air.
The more air you bring in, the more power you make. The 997 Turbo's engine intake system works off pulses, so how that air is diverted to either side of the engine is not as important as the volume incoming. The plenum kit includes an OEM Porsche Cayenne Turbo throttle body (part# 94860511503) which is a direct bolt on and plug in for the electronic throttle control with no modifications needed.
This throttle body has a 77.64mm inner diameter compared to the stock one of 75.64mm. We chose to go with this smaller diameter throttle body to give the car more low end horsepower and torque. If the diameter of the throttle body is to big, it will increase turbo lag and performance gains will only be made at the mid to top end RPM range. Since most 997 Turbo users drive their car on the street and track, we developed this product to substantially increase throttle response and improve "usable" power.
The Agency Power plenum kit is made using high quality 6061 aluminum that has been TIG welded and pressure tested in a T shape to mimic the OEM design. The CNC machined 4 bolt throttle body flange features a groove to accompany a rubber o-ring to ensure a secure and sealed fit with the OEM Porsche Cayenne throttle body. The T plenum features the necessary fittings for stock vacuum hoses and breather lines and includes a 1 way check valve needed. Each T plenum is powder coated gloss black for an OEM look and includes new silicone couplers in black and worm clamps to secure it to the factory intake manifolds. The installation of the plenum requires removal of the factory airbox and Y pipe to access the component.
Installation of the Agency Power plenum kit DOES NOT require the ECU to be flashed. The factory ECU will adjust accordingly to the change in throttle body diameter. However, corresponding mods including an ECU flash will only bring out additional power. As it stands alone, the plenum kit will add a bolt on 20 wheel horsepower to your Porsche 997 Turbo. As tested on a VR700 kit, the plenum added nearly 45 horsepower and 60 ft/lbs of torque. Splitting and diverting the air flow and directing it towards the cylinders at a much higher air speed.
Recommended installation time is approximately 3 hours.
HP Gains: 40-45Bhp. 60 ft/lbs of torque
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
AP-997TT-105
The product you are viewing cross references to these numbers
Fits:
Porsche 997 Turbo 2007-09
Adding bolt-on horsepower to the 997 Turbo is a continuous quest by many enthusiasts looking for more power. Reverting back to old tuning technologies, Agency Power has developed a larger throttle body and plenum kit for the Porsche 997 Turbo to gain added performance. The point of a larger throttle body is to get in more air.
The more air you bring in, the more power you make. The 997 Turbo's engine intake system works off pulses, so how that air is diverted to either side of the engine is not as important as the volume incoming. The plenum kit includes an OEM Porsche Cayenne Turbo throttle body (part# 94860511503) which is a direct bolt on and plug in for the electronic throttle control with no modifications needed.
This throttle body has a 77.64mm inner diameter compared to the stock one of 75.64mm. We chose to go with this smaller diameter throttle body to give the car more low end horsepower and torque. If the diameter of the throttle body is to big, it will increase turbo lag and performance gains will only be made at the mid to top end RPM range. Since most 997 Turbo users drive their car on the street and track, we developed this product to substantially increase throttle response and improve "usable" power.
The Agency Power plenum kit is made using high quality 6061 aluminum that has been TIG welded and pressure tested in a T shape to mimic the OEM design. The CNC machined 4 bolt throttle body flange features a groove to accompany a rubber o-ring to ensure a secure and sealed fit with the OEM Porsche Cayenne throttle body. The T plenum features the necessary fittings for stock vacuum hoses and breather lines and includes a 1 way check valve needed. Each T plenum is powder coated gloss black for an OEM look and includes new silicone couplers in black and worm clamps to secure it to the factory intake manifolds. The installation of the plenum requires removal of the factory airbox and Y pipe to access the component.
Installation of the Agency Power plenum kit DOES NOT require the ECU to be flashed. The factory ECU will adjust accordingly to the change in throttle body diameter. However, corresponding mods including an ECU flash will only bring out additional power. As it stands alone, the plenum kit will add a bolt on 20 wheel horsepower to your Porsche 997 Turbo. As tested on a VR700 kit, the plenum added nearly 45 horsepower and 60 ft/lbs of torque. Splitting and diverting the air flow and directing it towards the cylinders at a much higher air speed.
Recommended installation time is approximately 3 hours.
HP Gains: 40-45Bhp. 60 ft/lbs of torque
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
AP-997TT-105
99760511500
99760511501
99760511502
The product you are viewing cross references to these numbers
€1,311.82
Now €1,180.64
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Aluminum Intake Plenum 74mm. Porsche 997.1 Turbo IPD
Code: 97274
Vehicle Group
- Porsche 997 TURBO 2007>>
Information
The incredible 997 Porsche Turbo is the most revolutionary and capable Porsche Turbo to ever come out of Germany. The already explosive power can be further increased with the new 997 Turbo IPD Intake Plenums.
The patented IPD Plenum design works exceptionally well with all forced induction applications and the 997 Turbo is no exception. Power and torque increases provided by the IPD plenum are impressive and stay over and above all factory power curves from launch to redline. Maximum power increases take place in the midrange where it's most needed and most critical.
Maximum horsepower gains range from 30 to 35 depending on vehicle condition and pre-existing mods. The 997 Turbo plenums deliver smooth and linear power with considerably quicker boost response creating a longer and more desirable power band. The Turbo plenums deliver reliable performance for both street and motorsport applications enhancing the already visceral Porsche Turbo driving experience.
Unlike the 996 Turbo the 997 Turbo requires an "adaptation" period that can be fully realized with either a series of hard pulls on the dyno or 10 to 50 miles of hard driving which of course IPD recommends only be performed on a closed circuit race track.
The 997 Turbo has an extremely sensitive ECU/DME making it prone to external environmental corrections so it is imperative that proper, adequate and consistent cooling be available when you dyno any of the 997 Turbos to get accurate and reliable dyno figures both before and after each test.
Installation of all Turbo Plenums is highly recommended to be performed by qualified and trained Porsche technicians.
Turbo customers looking to increase engine power without pushing the motorsport envelope to redline would best benefit from the 74mm IPD Turbo Plenum.
This version of the 997 Turbo plenum utilizes the factory 74mm throttle body and delivers impressive performance gains for both stock and slightly modified Turbos with exhaust and software. Beyond these performance mods we recommend upgrading to the larger 82mm IPD Turbo Plenum.
The 74mm IPD Turbo Plenum is also designed to perform with the higher flowing IPD "Y" Pipe.
Fits:
Porsche 997.1 Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97274
The product you are viewing cross references to these numbers
The patented IPD Plenum design works exceptionally well with all forced induction applications and the 997 Turbo is no exception. Power and torque increases provided by the IPD plenum are impressive and stay over and above all factory power curves from launch to redline. Maximum power increases take place in the midrange where it's most needed and most critical.
Maximum horsepower gains range from 30 to 35 depending on vehicle condition and pre-existing mods. The 997 Turbo plenums deliver smooth and linear power with considerably quicker boost response creating a longer and more desirable power band. The Turbo plenums deliver reliable performance for both street and motorsport applications enhancing the already visceral Porsche Turbo driving experience.
Unlike the 996 Turbo the 997 Turbo requires an "adaptation" period that can be fully realized with either a series of hard pulls on the dyno or 10 to 50 miles of hard driving which of course IPD recommends only be performed on a closed circuit race track.
The 997 Turbo has an extremely sensitive ECU/DME making it prone to external environmental corrections so it is imperative that proper, adequate and consistent cooling be available when you dyno any of the 997 Turbos to get accurate and reliable dyno figures both before and after each test.
Installation of all Turbo Plenums is highly recommended to be performed by qualified and trained Porsche technicians.
Turbo customers looking to increase engine power without pushing the motorsport envelope to redline would best benefit from the 74mm IPD Turbo Plenum.
This version of the 997 Turbo plenum utilizes the factory 74mm throttle body and delivers impressive performance gains for both stock and slightly modified Turbos with exhaust and software. Beyond these performance mods we recommend upgrading to the larger 82mm IPD Turbo Plenum.
The 74mm IPD Turbo Plenum is also designed to perform with the higher flowing IPD "Y" Pipe.
Fits:
Porsche 997.1 Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97274
97274
99711021570
The product you are viewing cross references to these numbers
€934.56
Now €841.10
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Aluminum Intake Plenum Competition Range. Porsche 997.1 Turbo IPD
Code: 97282
Vehicle Group
- Porsche 997 TURBO 2007>>
Information
The incredible 997 Porsche Turbo is the most revolutionary and capable Porsche Turbo to ever come out of Germany. The already explosive power can be further increased with the new 997 Turbo IPD Intake Plenums.
The patented IPD Plenum design works exceptionally well with all forced induction applications and the 997 Turbo is no exception. Power and torque increases provided by the IPD plenum are impressive and stay over and above all factory power curves from launch to redline. Maximum power increases take place in the midrange where it's most needed and most critical.
Maximum horsepower gains range from 30 to 35 depending on vehicle condition and pre-existing mods. The 997 Turbo plenums deliver smooth and linear power with considerably quicker boost response creating a longer and more desirable power band. The Turbo plenums deliver reliable performance for both street and motorsport applications enhancing the already visceral Porsche Turbo driving experience.
Unlike the 996 Turbo the 997 Turbo requires an "adaptation" period that can be fully realized with either a series of hard pulls on the dyno or 10 to 50 miles of hard driving which of course IPD recommends only be performed on a closed circuit race track.
The 997 Turbo has an extremely sensitive ECU/DME making it prone to external environmental corrections so it is imperative that proper, adequate and consistent cooling be available when you dyno any of the 997 Turbos to get accurate and reliable dyno figures both before and after each test.
Installation of all Turbo Plenums is highly recommended to be performed by qualified and trained Porsche technicians.
Power obsessed Turbo customers looking to push the motorsport envelope a little harder would best benefit from the larger 82mm "Competition" IPD plenum fitted with a factory 997 GT3 82mm Porsche throttle body (additional purchase required).
The larger 82mm intake opening allows for even greater air flow to help optimize the more extreme mods such as larger turbos, intercoolers, Y Pipes and more aggressive software.
This larger version Plenum is also designed to perform with the higher flowing IPD "Y" Pipe.
997.1 Turbo Competition Plenum: HP Gains 30-35 / Torque Gains 35-40. Requires upgrading factory 74mm TB with 997 GT3 82mm Thottle Body
Fits:
Porsche 997.1 Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97282
The product you are viewing cross references to these numbers
The patented IPD Plenum design works exceptionally well with all forced induction applications and the 997 Turbo is no exception. Power and torque increases provided by the IPD plenum are impressive and stay over and above all factory power curves from launch to redline. Maximum power increases take place in the midrange where it's most needed and most critical.
Maximum horsepower gains range from 30 to 35 depending on vehicle condition and pre-existing mods. The 997 Turbo plenums deliver smooth and linear power with considerably quicker boost response creating a longer and more desirable power band. The Turbo plenums deliver reliable performance for both street and motorsport applications enhancing the already visceral Porsche Turbo driving experience.
Unlike the 996 Turbo the 997 Turbo requires an "adaptation" period that can be fully realized with either a series of hard pulls on the dyno or 10 to 50 miles of hard driving which of course IPD recommends only be performed on a closed circuit race track.
The 997 Turbo has an extremely sensitive ECU/DME making it prone to external environmental corrections so it is imperative that proper, adequate and consistent cooling be available when you dyno any of the 997 Turbos to get accurate and reliable dyno figures both before and after each test.
Installation of all Turbo Plenums is highly recommended to be performed by qualified and trained Porsche technicians.
Power obsessed Turbo customers looking to push the motorsport envelope a little harder would best benefit from the larger 82mm "Competition" IPD plenum fitted with a factory 997 GT3 82mm Porsche throttle body (additional purchase required).
The larger 82mm intake opening allows for even greater air flow to help optimize the more extreme mods such as larger turbos, intercoolers, Y Pipes and more aggressive software.
This larger version Plenum is also designed to perform with the higher flowing IPD "Y" Pipe.
997.1 Turbo Competition Plenum: HP Gains 30-35 / Torque Gains 35-40. Requires upgrading factory 74mm TB with 997 GT3 82mm Thottle Body
Fits:
Porsche 997.1 Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97282
97282
99711021570
The product you are viewing cross references to these numbers
€979.40
Now €881.46
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery