- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
For early struts with brake caliper mounting bolt spacing of 3.0 inches (76.2mm)
Min Wheel Diameter Required: 15 inch
Caliper Mounting Bolt Spacing: 3.0 inch (76.2mm)
Spindle Type Used: Factory Disc Spindle
Mount Type: Radial
Caliper Type: 4 piston - Powder Coated
Porsche 911 - 1969 to 1973
POWERLITE Front Brake Caliper Kits using OE Hubs and Rotors
Wilwood’s motorsports-proven Powerlite four piston calipers provide the foundation for a complete brake kit package for classic 1969-74 Porsche 911s using OE hubs. Complete brake kits include brackets for bolt-on mounting to struts with 3.0” (76,2mm) mounting tabs, rotors, stainless steel Flexlines and brake pads. Caliper-only kits include brackets for 3.0” mounting tabs, Flexlines, and brake pads.
Kit Features:
- Calipers continuously refined through modern engineering and manufacturing methods, including FEA (Finite Element Analysis)
- Compatible with factory master cylinder
Calipers: POWERLITE PL4R
- Rigid, forged aluminum radial mount four piston calipers
- Quick-clip top pad retainer allows faster pad changes and fits inside smaller diameter wheels
- One-piece stainless steel pistons slow heat transfer and resist corrosion
- Calipers are finished in gloss Le Mans yellow, black or red powder coat, over durable wear-resistant Type-III hard anodized coating
Brake Pads: BP-10
- BP-10 street performance pads
Installation Parts:
- Caliper brackets, stainless steel Flexlines and all premium-grade hardware for installation are included
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
140-17019
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Hydra tec lubricant for maintenance work and protection Textar
.jpg){kind=link}
Hydra tec lubricant for maintenance work and protection Textar
Available in 180ml Tube, 75ml Tube or 5ml Sachet
The Advantages of Hydra Tec:
- Facilitates the installation of hydraulic brake components
- Tested compatibility with commercially available braking fluids (DOT3, DOT4, DOT4LV, DOT5.1)
- Free of mineral oils and compatible with EPDM rubber
- In addition, running surfaces are protected against corrosion
Hydra Tec is suitable for lubricating:
- Cylinder running surfaces
- Pistons
- Sealing elements
Application:
Apply a thin layer of Hydra Tec on the marked sections.
Note:
Hydra Tec should be applied thinly and evenly.
Never use mineral oils or greases as substitutes.
Do not apply the product on friction surfaces of brake pads or brake discs.
Find out about Textar product verification here
Shop Securely
12 Month Warranty
Worldwide Delivery