Front and rear NTR R3 trackday and race suspension kit. Porsche 996 Carrera 2 / 996 GT3 - NTCPO021R3-46
NTCPO021R3-46
Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
Information
Front and rear NTR R3 trackday and race suspension kit.
Fits
Porsche 996 Carrera 2 - 1997 to 2005
Porsche 996 GT3 / GT3 RS - 1999 to 2004
Kits are supplied complete, ready to fit with Nitron race springs (including helpers where required) and top mounts.
This kit is the hose and remote reservoir type
Standalone Front Axle Lift system raises height by 25mm at the shock absorber
The NTR R3 system sets the standard for ultimate performance with a design that offers drivers and engineers unparalleled damping control.
3-Way independent damping adjustment
By incorporating our class leading large diameter piston and ultra-strong piston rod, the R3 system demonstrates outstanding levels of performance, damping control and adjustment.
The remotely mounted reservoir allows quick and simple independent adjustment of rebound and fast and slow compression damping. The large range of adjustment and quality of feedback allows the experienced driver to fully exploit the full potential of their car.
The R3 is a proven race winner and lap record holder across a wide spectrum of international motorsport formulas.
The high-grade materials protect against corrosion whilst reducing weight. Every R3 kit is custom built, sprung and fully serviceable. Titanium and hard-anodised parts are hand built to last not only the lengthiest endurance races, season after season, but also the harshest of winters.
Bi-Axis Hose Fittings
NTR Hose shocks are fitted with Nitrons exclusively developed Bi-Axis fittings that allow for simple and precise installation.
R3 kits have dry-breaks on front hoses only
Note:
Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.
All Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
NTCPO021R3-46
The product you are viewing cross references to these numbers
Fits
Porsche 996 Carrera 2 - 1997 to 2005
Porsche 996 GT3 / GT3 RS - 1999 to 2004
Kits are supplied complete, ready to fit with Nitron race springs (including helpers where required) and top mounts.
This kit is the hose and remote reservoir type
Standalone Front Axle Lift system raises height by 25mm at the shock absorber
The NTR R3 system sets the standard for ultimate performance with a design that offers drivers and engineers unparalleled damping control.
3-Way independent damping adjustment
By incorporating our class leading large diameter piston and ultra-strong piston rod, the R3 system demonstrates outstanding levels of performance, damping control and adjustment.
The remotely mounted reservoir allows quick and simple independent adjustment of rebound and fast and slow compression damping. The large range of adjustment and quality of feedback allows the experienced driver to fully exploit the full potential of their car.
The R3 is a proven race winner and lap record holder across a wide spectrum of international motorsport formulas.
The high-grade materials protect against corrosion whilst reducing weight. Every R3 kit is custom built, sprung and fully serviceable. Titanium and hard-anodised parts are hand built to last not only the lengthiest endurance races, season after season, but also the harshest of winters.
Bi-Axis Hose Fittings
NTR Hose shocks are fitted with Nitrons exclusively developed Bi-Axis fittings that allow for simple and precise installation.
R3 kits have dry-breaks on front hoses only
Note:
Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.
All Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
NTCPO021R3-46
021R3-46
99633305191
99633305195
99633305108
99633305188
99633305197
99634304191
99634304195
99634304197
9963430413
999634304120
99634304123
99634304127
99634304136
99634304116
99634304104
99634304130
99633305104
99633305143
The product you are viewing cross references to these numbers
Prices from: £5,375.00
Also found on these pages
Related products
Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
Information
Front and rear NTR R1 suspension kit.
Fits
Porsche 996 Carrera 2 - 1997 to 2005
Porsche 996 GT3 / GT3 RS - 1999 to 2004
Standalone Front Axle Lift system raises height by 25mm at the shock absorber
Kits are supplied complete, ready to fit with Nitron race springs (including helpers where required) and top mounts.
NTR R1 System offers unrivalled performance and value with a design that gives drivers a wide range of effective, easy to use damping control.
2-Way combined damping adjustment.
Developed from our full race suspension and sharing many components with the R3 system, the R1 offers exceptional performance, reliability and value for both road and track use. Widely praised by drivers around the world and respected for out-performing considerably more expensive suspension kits.
R1 kits provides uncompromising quality, reliability and performance without the need for a remote canister. Fade-resistant and hand built with ultra-low friction components, the R1 shock is made to last on the road and track.
The high-grade materials protect against corrosion whilst reducing weight. Every R1 kit is custom built, sprung and fully serviceable. Titanium and hard-anodised parts are hand built to last not only season after season, but also the harshest of winters.
Note:
Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.
All Nitron shocks are hand made to order to each individual customer's requirements.
Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
NTCPO021R1-46
The product you are viewing cross references to these numbers
Fits
Porsche 996 Carrera 2 - 1997 to 2005
Porsche 996 GT3 / GT3 RS - 1999 to 2004
Standalone Front Axle Lift system raises height by 25mm at the shock absorber
Kits are supplied complete, ready to fit with Nitron race springs (including helpers where required) and top mounts.
NTR R1 System offers unrivalled performance and value with a design that gives drivers a wide range of effective, easy to use damping control.
2-Way combined damping adjustment.
Developed from our full race suspension and sharing many components with the R3 system, the R1 offers exceptional performance, reliability and value for both road and track use. Widely praised by drivers around the world and respected for out-performing considerably more expensive suspension kits.
R1 kits provides uncompromising quality, reliability and performance without the need for a remote canister. Fade-resistant and hand built with ultra-low friction components, the R1 shock is made to last on the road and track.
The high-grade materials protect against corrosion whilst reducing weight. Every R1 kit is custom built, sprung and fully serviceable. Titanium and hard-anodised parts are hand built to last not only season after season, but also the harshest of winters.
Note:
Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.
All Nitron shocks are hand made to order to each individual customer's requirements.
Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
NTCPO021R1-46
021R1-46
The product you are viewing cross references to these numbers
Prices from: £3,490.50
Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
Information
Front and rear NTR R1 suspension kit.
Fits
Porsche 996 Carrera 2 3.4ltr - 1997 to 2001
Porsche 996 Carrera 2 3.6ltr - 2001 to 2005
For road and track use
The Nitron NTR RoadSport system offers unrivalled performance and value with a design that gives drivers a wide range of effective and easy to use damping control.
Combined 2-way damping adjustment Developed for fast road drivers who occasionally want to take their car to the track. The NTR RoadSport kit provides exceptional performance whilst retaining the OEM top mounts to ensure OEM levels of comfort and noise.
NTR RoadSport kit gives uncompromising quality, reliability and performance without the need for a remote canister. Fade-resistant and hand built with ultra-low friction components.
The ultra high-grade materials protect against corrosion whilst reducing weight.
Every NTR RoadSport kit is custom built, sprung and fully serviceable. Titanium and hard-anodised parts are hand built to last not only season after season, but also the harshest of winters.
Note:
Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.
All Nitron NTR shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
NTCPO019-46RS
The product you are viewing cross references to these numbers
Fits
Porsche 996 Carrera 2 3.4ltr - 1997 to 2001
Porsche 996 Carrera 2 3.6ltr - 2001 to 2005
For road and track use
The Nitron NTR RoadSport system offers unrivalled performance and value with a design that gives drivers a wide range of effective and easy to use damping control.
Combined 2-way damping adjustment Developed for fast road drivers who occasionally want to take their car to the track. The NTR RoadSport kit provides exceptional performance whilst retaining the OEM top mounts to ensure OEM levels of comfort and noise.
NTR RoadSport kit gives uncompromising quality, reliability and performance without the need for a remote canister. Fade-resistant and hand built with ultra-low friction components.
The ultra high-grade materials protect against corrosion whilst reducing weight.
Every NTR RoadSport kit is custom built, sprung and fully serviceable. Titanium and hard-anodised parts are hand built to last not only season after season, but also the harshest of winters.
Note:
Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.
All Nitron NTR shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
NTCPO019-46RS
019-46RS
The product you are viewing cross references to these numbers
Price: £2,415.00
Orderable