Engine head gasket set. Porsche 924S / 944 - 94410090100
94410090100/1
Vehicle Group
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
Information
Engine head gasket set.
Fits:
Porsche 924S 1986-88
Porsche 944 2.5L 1982-88
Gasket set includes:
95110437402 - Head gasket
92810419312 - Valve stem seal x8
92811119312 - Exhaust Manifold to head gasket x4
94411113501 - Down pipe gasket x2
94410519903 - Camshaft housing gasket
94411016305 - Intake manifold gasket x4
92810619704 - Thermostat housing gasket
94410431106 - Coolant inlet housing gasket
92810518400 - Camshaft housing o-ring
99970160240 - Camshaft seal ring
99911328240 - Shaft sealing ring
92810518902 - Camshaft housing rear cork gasket
94410532100 - Gasket
90012314030 - Cam housing screw plug sealing ring
99970146840 - Throttle housing seal
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94410090100
The product you are viewing cross references to these numbers
Fits:
Porsche 924S 1986-88
Porsche 944 2.5L 1982-88
Gasket set includes:
95110437402 - Head gasket
92810419312 - Valve stem seal x8
92811119312 - Exhaust Manifold to head gasket x4
94411113501 - Down pipe gasket x2
94410519903 - Camshaft housing gasket
94411016305 - Intake manifold gasket x4
92810619704 - Thermostat housing gasket
94410431106 - Coolant inlet housing gasket
92810518400 - Camshaft housing o-ring
99970160240 - Camshaft seal ring
99911328240 - Shaft sealing ring
92810518902 - Camshaft housing rear cork gasket
94410532100 - Gasket
90012314030 - Cam housing screw plug sealing ring
99970146840 - Throttle housing seal
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94410090100
94410090100
02-26015-03
022601503
517.900
The product you are viewing cross references to these numbers
£105.00
Now £94.76
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Related products
Victor-Reinz Reinzosil gasket maker valve cover oil sump sealant 300°C 70ml
Code: 703141410
Information
Victor-Reinz Reinzosil gasket maker valve cover oil sump sealant 300°C 70ml
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
703141410
The product you are viewing cross references to these numbers
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
703141410
703141410
PCG04330087
70-31414-10
The product you are viewing cross references to these numbers
£5.95
Now £5.65
Arriving soon
Shop Securely
12 Month Warranty
Worldwide Delivery
Hylomar Anaerobic Gasket Compound - 300ml cartridge
Code: F/HG3400H/300M
Information
Hylomar Gasket 3400 is a modified anaerobic curing, flexible sealant designed to become a Formed in Place (FIP) Gasket when cured. The cured compound has good temperature resistance and high resistance to fretting. The cure is initiated when the compound is in contact with metal ions and in anaerobic conditions. The cure rate and final strength is dependent on the metals being joined and the temperature at which the component is used. The heat generated by a running engine will accelerate the cure.
Typical Applications
Hylomar Gasket 3400 can be used as a gasketing compound between machined surfaces. It is ideal for sealing between mating faces on engines and transmission components where resistance to temperature and vibration are essential.
INSTRUCTIONS FOR USE
Hylomar Gasket 3400 should be applied to clean and dry surfaces, free of contamination such as oil or grease. The compound may be dispensed by hand from cartridge, concertina pack, or via a screen printing system. Once applied the joint should be assembled as soon as practical. Any excess compound can be easily wiped off external surfaces with a clean cloth soaked in Acetone or other suitable solvents.
Typical Physical Properties:
UNCURED PRODUCT
Composition: Methyl-Methacrylate
Colour: Yellow
Viscosity @ 25°C / Brookfield Spindle 6 @ 2.5rpm: 100,000cps
Specific Gravity @ 25°C: 1.10 g/ml
Solvent Content: None
Typical Applications
Hylomar Gasket 3400 can be used as a gasketing compound between machined surfaces. It is ideal for sealing between mating faces on engines and transmission components where resistance to temperature and vibration are essential.
INSTRUCTIONS FOR USE
Hylomar Gasket 3400 should be applied to clean and dry surfaces, free of contamination such as oil or grease. The compound may be dispensed by hand from cartridge, concertina pack, or via a screen printing system. Once applied the joint should be assembled as soon as practical. Any excess compound can be easily wiped off external surfaces with a clean cloth soaked in Acetone or other suitable solvents.
Typical Physical Properties:
UNCURED PRODUCT
Composition: Methyl-Methacrylate
Colour: Yellow
Viscosity @ 25°C / Brookfield Spindle 6 @ 2.5rpm: 100,000cps
Specific Gravity @ 25°C: 1.10 g/ml
Solvent Content: None
Specific Gravity g/ml @ 25°C: 1.04
Flash Point: >100°C
Shelf Life: 1 Year @ 4° to 25°C
CURED PRODUCT
Handling Time: 40 minutes
Functional Cure Time: 4 – 6 hours
Full Cure Time : 24 – 72 hours
Shear Strength : 1.5 N/mm²
Mild Steel/Mild Steel BS 5350 Part C5
Aluminium/Aluminium BS 5350 Part C5
Temperature Range: -40° to 150°C
£51.00
Now £48.45
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery