EBC blue brake pads "street and track" Front. Porsche 991 / 992 / 718 / Cayman GT4 - DP52206NDX
DP52206NDX
Vehicle Group
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 992 Carrera 2S 3.0L
- Porsche 992 Carrera 4S 3.0L
- Porsche 992 Carrera 2S Cabriolet 3.0L
- Porsche 992 Carrera 4S Cabriolet 3.0L
- Porsche 992 Targa 4S 3.0L
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Information
EBC BLUESTUFF Front Brake Pads "Street and Track"
Sold as set of 4 pads for one axle.
Porsche 991 GT3 3.8ltr - 2013 to 2015 (Cast Iron Disc Only)
Porsche 991 turbo / turbo S 3.8ltr - 2013 to 2015 (Cast Iron Disc Only)
Porsche 991.2 Carrera S / Carrera 4S 3.0lt - 2015 to 2019 (Cast Iron Disc Only)
Porsche 991.2 Carrera GTS 3.0ltr 2017-2019 (Cast Iron Disc Only)
Porsche 991.2 turbo / turbo S 3.8ltr 2015-2019 (Cast Iron Disc Only)
Porsche 991.2 GT3 3.8ltr 2015-2019 (Cast Iron Disc Only)
Porsche 991.2 GT3 RS 4.0ltr 2015-2018 (Cast Iron Disc Only)
Porsche 992 Carrera S 3.0ltr 2019>> (Cast Iron Disc Only)
Porsche 992 Carrera 4S 3.0ltr 2019>> (Cast Iron Disc Only)
Porsche 981 Cayman GT4 3.8ltr 2015-2016 (Cast Iron Disc Only)
Porsche 718 Boxster GTS 4.0ltr 2020>> (Cast Iron Disc Only)
Porsche 718 Cayman GTS 4.0ltr 2020>> (Cast Iron Disc Only)
EBC Bluestuff NDX
Super-Street & Trackday Brake Pads
A great all round sport and race pad, revised to a new improved formula in 2021 for faster bed-in.
Bluestuff NDX is a high friction sport and race material that now has R90 approval on almost all fitments for the EU. For USA and Asia markets where R90 does not apply, this compound is totally road safe and the perfect choice for performance vehicles driven hard on the road or track days.
Product Information
When we say "Trackday" don't underestimate this fantastic material.
The reason we draw users' attention to the words Trackday ( also known in the USA as lapping ) is because of this material's fantastic ability to bed in quickly. Weekend fit and go drivers do not want to spend their laps bedding in brake pads.
Yet when used on more serious race track drivers this material delights and up to rotor temps of 550C /1030 F Bluestuff is the way to go. This material has been used by numerous spec series cup car racing groups in Europe.
The NDX pad material is bonded to the steel backing plates using the patented NUCAP NRS hook system which raises shear and bond strength by a factor of five and prevents pad to plate separation. The pads are then baked and ground and feature high-volume Vee grooves to catch the larger amount of debris from track use.
Target use is all types of fast and heavier cars in performance and race driving with a much enhanced lifetime over our previous Yellowstuff grade pads.
R&D Manager Steve Payne checks out the first batch of the Bluestuff NDX material made with a revolutionary process to produce the highly acclaimed EBC Bluestuff NDX Race Pads. The process involves 5 steps never before used in friction materials and sets EBC Brakes firmly in the lead as a provider of brake friction.
Bluestuff is available in NDX high friction version at 0.52 Mu and a lower B version for many rear applications on lighter cars with a lower 0.42 Mu.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP52206NDX
The product you are viewing cross references to these numbers
Sold as set of 4 pads for one axle.
Porsche 991 GT3 3.8ltr - 2013 to 2015 (Cast Iron Disc Only)
Porsche 991 turbo / turbo S 3.8ltr - 2013 to 2015 (Cast Iron Disc Only)
Porsche 991.2 Carrera S / Carrera 4S 3.0lt - 2015 to 2019 (Cast Iron Disc Only)
Porsche 991.2 Carrera GTS 3.0ltr 2017-2019 (Cast Iron Disc Only)
Porsche 991.2 turbo / turbo S 3.8ltr 2015-2019 (Cast Iron Disc Only)
Porsche 991.2 GT3 3.8ltr 2015-2019 (Cast Iron Disc Only)
Porsche 991.2 GT3 RS 4.0ltr 2015-2018 (Cast Iron Disc Only)
Porsche 992 Carrera S 3.0ltr 2019>> (Cast Iron Disc Only)
Porsche 992 Carrera 4S 3.0ltr 2019>> (Cast Iron Disc Only)
Porsche 981 Cayman GT4 3.8ltr 2015-2016 (Cast Iron Disc Only)
Porsche 718 Boxster GTS 4.0ltr 2020>> (Cast Iron Disc Only)
Porsche 718 Cayman GTS 4.0ltr 2020>> (Cast Iron Disc Only)
EBC Bluestuff NDX
Super-Street & Trackday Brake Pads
A great all round sport and race pad, revised to a new improved formula in 2021 for faster bed-in.
Bluestuff NDX is a high friction sport and race material that now has R90 approval on almost all fitments for the EU. For USA and Asia markets where R90 does not apply, this compound is totally road safe and the perfect choice for performance vehicles driven hard on the road or track days.
Product Information
When we say "Trackday" don't underestimate this fantastic material.
The reason we draw users' attention to the words Trackday ( also known in the USA as lapping ) is because of this material's fantastic ability to bed in quickly. Weekend fit and go drivers do not want to spend their laps bedding in brake pads.
Yet when used on more serious race track drivers this material delights and up to rotor temps of 550C /1030 F Bluestuff is the way to go. This material has been used by numerous spec series cup car racing groups in Europe.
The NDX pad material is bonded to the steel backing plates using the patented NUCAP NRS hook system which raises shear and bond strength by a factor of five and prevents pad to plate separation. The pads are then baked and ground and feature high-volume Vee grooves to catch the larger amount of debris from track use.
Target use is all types of fast and heavier cars in performance and race driving with a much enhanced lifetime over our previous Yellowstuff grade pads.
R&D Manager Steve Payne checks out the first batch of the Bluestuff NDX material made with a revolutionary process to produce the highly acclaimed EBC Bluestuff NDX Race Pads. The process involves 5 steps never before used in friction materials and sets EBC Brakes firmly in the lead as a provider of brake friction.
Bluestuff is available in NDX high friction version at 0.52 Mu and a lower B version for many rear applications on lighter cars with a lower 0.42 Mu.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP52206NDX
99135194784
The product you are viewing cross references to these numbers
€200.01
Now €192.01
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery
Related products
EBC Blue brake pads NDX RACE Front. Porsche 996 / 997 / 986 Boxster / 987 Cayman
Code: DP51514NDX
Vehicle Group
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche Cayman S 3.4L 987C 2005-08
Information
EBC Blue brake pads NDX RACE
Sold as set of 4 pads for one axle.
Porsche 996 Carrera 3.4L / 3.6L 1997-04 (Front)
Porsche 997 C2 3.6L 2004-05 (Front)
Porsche 986 Boxster S 3.2L 2000-06 (Front)
Porsche 987 Boxster S 3.2L / 3.4L 2005-08 (Front)*
Porsche 987C Cayman S 3.4L 2005-08 (Front)*
*Original shape to use with old type pin kit and sensors.
Porsche 996 C4S 3.6L 2003-05 (Rear)
Porsche 996 Turbo 2000-04 (Rear)
Porsche 996 GT2 2000-04 (Rear)
Porsche 996 GT3 2000-04 (Rear)
Porsche 997 3.8L C2S / C4S (Rear)
PORSCHE 997 3.8 C2S / C4S 2004-2005 (Cast Iron Disc Only) (Rear)
EBC Bluestuff NDX
Super-Street & Trackday Brake Pads
Bluestuff NDX is a high friction sport and race material that now has R90 approval on almost all fitments for the EU. For USA and Asia markets where R90 does not apply, this compound is totally road safe and the perfect choice for performance vehicles driven hard on the road or track days.
Product Information
When we say "Trackday" don't underestimate this fantastic material.
The reason we draw users' attention to the words Trackday ( also known in the USA as lapping ) is because of this material's fantastic ability to bed in quickly. Weekend fit and go drivers do not want to spend their laps bedding in brake pads.
Yet when used on more serious race track drivers this material delights and up to rotor temps of 550C /1030 F Bluestuff is the way to go. This material has been used by numerous spec series cup car racing groups in Europe.
The NDX pad material is bonded to the steel backing plates using the patented NUCAP NRS hook system which raises shear and bond strength by a factor of five and prevents pad to plate separation. The pads are then baked and ground and feature high-volume Vee grooves to catch the larger amount of debris from track use.
Target use is all types of fast and heavier cars in performance and race driving with a much enhanced lifetime over our previous Yellowstuff grade pads.
R&D Manager Steve Payne checks out the first batch of the Bluestuff NDX material made with a revolutionary process to produce the highly acclaimed EBC Bluestuff NDX Race Pads. The process involves 5 steps never before used in friction materials and sets EBC Brakes firmly in the lead as a provider of brake friction.
Bluestuff is available in NDX high friction version at 0.52 Mu and a lower B version for many rear applications on lighter cars with a lower 0.42 Mu.
Performance
EBC Bluestuff are heat scorched which helps bedding times but you still need to take care especially on the highway and when using on part worn rotors. Use the brakes gently for 200 miles, gradually increasing demand on the brakes in a SAFE ROAD ENVIRONMENT until you feel totally confident and can evaluate their stopping distances in all traffic conditions.
Remember, it's down to you and your bedding-in process. If you do feel brake fade a couple of times and even smell the brakes, this is totally normal and once achieved and the brakes are allowed to cool, they will have improved a lot.
There are several ways of surface scorching pads and EBC has chosen an infra red lamp tunnel for surface preparation of its pad ranges. The furnace is now scorching all pads for resale including the Bluestuff NDX range.
Bedding Performance
The curve shows that friction builds quickly during bedding in even after 2-3 stops but in a real world TRACK USE where rotors may not be perfect and calipers not serviced weekly (like our lab dyno ones) the bedding in process with Blue may exhibit 20-25mm contact bands in the centre of the discs after 4-5 laps and on some standard street calipers some vibration.
This is simply the pad telling you " I cannot hold onto the disc at these torques until I am fully bedded in". If vibration happens you should continue driving whilst BRAKING EARLIER TO BE SAFE until the contact band widens to almost entire disc/rotor sweep at which point the vibration will stop. In street use the torques will not normally be enough to generate vibration during bed in but drive safely for 200 miles gentle brake use to bed in your new brakes and test them to performance in a safe and quiet road environment until you have total confidence that they are bedded. Hitting the brakes too hard, too soon can not only shorten pad life it may cause loss of brakes and an accident. Bed brakes in progressively.
Pre-bedding burns off a lot of the volatile organics in the brake pad surface by passing the pads under an apparatus similar to a toaster after manufacture for a few seconds; this chars the surface and the paint around the pad surface but the result is a major reduction in bed in time which all drivers will appreciate.
More information
Rotor condition. Is important, an off-flat or ribbed and grooved rotor will treble bed in times for street or track use, this is a harder and more durable pad and rotors should be in almost dead flat condition. If you need to have your rotors skimmed we recommend ONLY the very praiseworthy ON CAR brake lathes from Pro Cut.
Lifetime. ALWAYS inspect pads every 30 laps and discard when friction material is down to one eighth of an inch or 3mm to avoid fade. In street use the lifetime is considerable – 20,000 miles and upwards can be expected, even when driving hard.
Ducting and caliper drag. When using a street car brake system for racing, the mere insertion of a race formula pad does not transform your car into a track beast. Some cooling ducts often need to be added to give the brake system and pads a chance to survive race use.
Using Bluestuff NDX as a Street only pad. In Europe, the ECE R90 brake safety regulations require brake pads to have R90 certification when used on the road and with Bluestuff, this is not available for all cars. To find out if Bluestuff is R90 approved for your car, contact us.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP51514NDX
The product you are viewing cross references to these numbers
Sold as set of 4 pads for one axle.
Porsche 996 Carrera 3.4L / 3.6L 1997-04 (Front)
Porsche 997 C2 3.6L 2004-05 (Front)
Porsche 986 Boxster S 3.2L 2000-06 (Front)
Porsche 987 Boxster S 3.2L / 3.4L 2005-08 (Front)*
Porsche 987C Cayman S 3.4L 2005-08 (Front)*
*Original shape to use with old type pin kit and sensors.
Porsche 996 C4S 3.6L 2003-05 (Rear)
Porsche 996 Turbo 2000-04 (Rear)
Porsche 996 GT2 2000-04 (Rear)
Porsche 996 GT3 2000-04 (Rear)
Porsche 997 3.8L C2S / C4S (Rear)
PORSCHE 997 3.8 C2S / C4S 2004-2005 (Cast Iron Disc Only) (Rear)
EBC Bluestuff NDX
Super-Street & Trackday Brake Pads
Bluestuff NDX is a high friction sport and race material that now has R90 approval on almost all fitments for the EU. For USA and Asia markets where R90 does not apply, this compound is totally road safe and the perfect choice for performance vehicles driven hard on the road or track days.
Product Information
When we say "Trackday" don't underestimate this fantastic material.
The reason we draw users' attention to the words Trackday ( also known in the USA as lapping ) is because of this material's fantastic ability to bed in quickly. Weekend fit and go drivers do not want to spend their laps bedding in brake pads.
Yet when used on more serious race track drivers this material delights and up to rotor temps of 550C /1030 F Bluestuff is the way to go. This material has been used by numerous spec series cup car racing groups in Europe.
The NDX pad material is bonded to the steel backing plates using the patented NUCAP NRS hook system which raises shear and bond strength by a factor of five and prevents pad to plate separation. The pads are then baked and ground and feature high-volume Vee grooves to catch the larger amount of debris from track use.
Target use is all types of fast and heavier cars in performance and race driving with a much enhanced lifetime over our previous Yellowstuff grade pads.
R&D Manager Steve Payne checks out the first batch of the Bluestuff NDX material made with a revolutionary process to produce the highly acclaimed EBC Bluestuff NDX Race Pads. The process involves 5 steps never before used in friction materials and sets EBC Brakes firmly in the lead as a provider of brake friction.
Bluestuff is available in NDX high friction version at 0.52 Mu and a lower B version for many rear applications on lighter cars with a lower 0.42 Mu.
Performance
EBC Bluestuff are heat scorched which helps bedding times but you still need to take care especially on the highway and when using on part worn rotors. Use the brakes gently for 200 miles, gradually increasing demand on the brakes in a SAFE ROAD ENVIRONMENT until you feel totally confident and can evaluate their stopping distances in all traffic conditions.
Remember, it's down to you and your bedding-in process. If you do feel brake fade a couple of times and even smell the brakes, this is totally normal and once achieved and the brakes are allowed to cool, they will have improved a lot.
There are several ways of surface scorching pads and EBC has chosen an infra red lamp tunnel for surface preparation of its pad ranges. The furnace is now scorching all pads for resale including the Bluestuff NDX range.
Bedding Performance
The curve shows that friction builds quickly during bedding in even after 2-3 stops but in a real world TRACK USE where rotors may not be perfect and calipers not serviced weekly (like our lab dyno ones) the bedding in process with Blue may exhibit 20-25mm contact bands in the centre of the discs after 4-5 laps and on some standard street calipers some vibration.
This is simply the pad telling you " I cannot hold onto the disc at these torques until I am fully bedded in". If vibration happens you should continue driving whilst BRAKING EARLIER TO BE SAFE until the contact band widens to almost entire disc/rotor sweep at which point the vibration will stop. In street use the torques will not normally be enough to generate vibration during bed in but drive safely for 200 miles gentle brake use to bed in your new brakes and test them to performance in a safe and quiet road environment until you have total confidence that they are bedded. Hitting the brakes too hard, too soon can not only shorten pad life it may cause loss of brakes and an accident. Bed brakes in progressively.
Pre-bedding burns off a lot of the volatile organics in the brake pad surface by passing the pads under an apparatus similar to a toaster after manufacture for a few seconds; this chars the surface and the paint around the pad surface but the result is a major reduction in bed in time which all drivers will appreciate.
More information
Rotor condition. Is important, an off-flat or ribbed and grooved rotor will treble bed in times for street or track use, this is a harder and more durable pad and rotors should be in almost dead flat condition. If you need to have your rotors skimmed we recommend ONLY the very praiseworthy ON CAR brake lathes from Pro Cut.
Lifetime. ALWAYS inspect pads every 30 laps and discard when friction material is down to one eighth of an inch or 3mm to avoid fade. In street use the lifetime is considerable – 20,000 miles and upwards can be expected, even when driving hard.
Ducting and caliper drag. When using a street car brake system for racing, the mere insertion of a race formula pad does not transform your car into a track beast. Some cooling ducts often need to be added to give the brake system and pads a chance to survive race use.
Using Bluestuff NDX as a Street only pad. In Europe, the ECE R90 brake safety regulations require brake pads to have R90 certification when used on the road and with Bluestuff, this is not available for all cars. To find out if Bluestuff is R90 approved for your car, contact us.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP51514NDX
99635294902
99635294903
The product you are viewing cross references to these numbers
€195.62
Now €187.80
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
EBC Blue brake pads NDX RACE Rear. Porsche 996 / 997 / Boxster / Cayman
Code: DP51208NDX
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Information
EBC Blue brake pads NDX RACE.
Sold as set of 4 pads for one axle.
PORSCHE 996 3.4 C2 / C4 97-2002 (Rear)
PORSCHE 996 3.4 C2 / C4 02-2005 (Cast Iron Disc Only) (Rear)
PORSCHE 996 3.6 C2 / C4 / C4S / Targa 2001-2005 (Cast Iron Disc Only) (Rear)
PORSCHE 997 3.6 C2 / C4 / C4 Targa 2004-2008 (Cast Iron Disc Only) (Rear)
PORSCHE 986 Boxster 2.5 1997-99 (Cast Iron Discs only) (Rear)
PORSCHE 986 Boxster 2.7 1999-04 (Cast Iron Discs only) (Rear)
PORSCHE 986 Boxster S 3.2 2000-04 (Cast Iron Discs only) (Rear)
PORSCHE 987.1 Boxster S 3.2 / 3.4 2004-08 (Cast Iron Discs only) (Rear)
PORSCHE 987.2 Boxster S 3.4 2008-12 (Cast Iron Discs only) (Rear)
PORSCHE 987C.1 Cayman 3.4 2005-09 (Cast Iron Discs only) (Rear)
PORSCHE 987C.2 Cayman 3.4 2009-12 (Cast Iron Discs only) (Rear)
EBC Bluestuff NDX
Super-Street & Trackday Brake Pads
Bluestuff NDX is a high friction sport and race material that now has R90 approval on almost all fitments for the EU. For USA and Asia markets where R90 does not apply, this compound is totally road safe and the perfect choice for performance vehicles driven hard on the road or track days.
Product Information
When we say "Trackday" don't underestimate this fantastic material.
The reason we draw users' attention to the words Trackday ( also known in the USA as lapping ) is because of this material's fantastic ability to bed in quickly. Weekend fit and go drivers do not want to spend their laps bedding in brake pads.
Yet when used on more serious race track drivers this material delights and up to rotor temps of 550C /1030 F Bluestuff is the way to go. This material has been used by numerous spec series cup car racing groups in Europe.
The NDX pad material is bonded to the steel backing plates using the patented NUCAP NRS hook system which raises shear and bond strength by a factor of five and prevents pad to plate separation. The pads are then baked and ground and feature high-volume Vee grooves to catch the larger amount of debris from track use.
Target use is all types of fast and heavier cars in performance and race driving with a much enhanced lifetime over our previous Yellowstuff grade pads.
R&D Manager Steve Payne checks out the first batch of the Bluestuff NDX material made with a revolutionary process to produce the highly acclaimed EBC Bluestuff NDX Race Pads. The process involves 5 steps never before used in friction materials and sets EBC Brakes firmly in the lead as a provider of brake friction.
Bluestuff is available in NDX high friction version at 0.52 Mu and a lower B version for many rear applications on lighter cars with a lower 0.42 Mu.
Performance
EBC Bluestuff are heat scorched which helps bedding times but you still need to take care especially on the highway and when using on part worn rotors. Use the brakes gently for 200 miles, gradually increasing demand on the brakes in a SAFE ROAD ENVIRONMENT until you feel totally confident and can evaluate their stopping distances in all traffic conditions.
Remember, it's down to you and your bedding-in process. If you do feel brake fade a couple of times and even smell the brakes, this is totally normal and once achieved and the brakes are allowed to cool, they will have improved a lot.
There are several ways of surface scorching pads and EBC has chosen an infra red lamp tunnel for surface preparation of its pad ranges. The furnace is now scorching all pads for resale including the Bluestuff NDX range.
Bedding Performance
The curve shows that friction builds quickly during bedding in even after 2-3 stops but in a real world TRACK USE where rotors may not be perfect and calipers not serviced weekly (like our lab dyno ones) the bedding in process with Blue may exhibit 20-25mm contact bands in the centre of the discs after 4-5 laps and on some standard street calipers some vibration.
This is simply the pad telling you " I cannot hold onto the disc at these torques until I am fully bedded in". If vibration happens you should continue driving whilst BRAKING EARLIER TO BE SAFE until the contact band widens to almost entire disc/rotor sweep at which point the vibration will stop. In street use the torques will not normally be enough to generate vibration during bed in but drive safely for 200 miles gentle brake use to bed in your new brakes and test them to performance in a safe and quiet road environment until you have total confidence that they are bedded. Hitting the brakes too hard, too soon can not only shorten pad life it may cause loss of brakes and an accident. Bed brakes in progressively.
Pre-bedding burns off a lot of the volatile organics in the brake pad surface by passing the pads under an apparatus similar to a toaster after manufacture for a few seconds; this chars the surface and the paint around the pad surface but the result is a major reduction in bed in time which all drivers will appreciate.
More information
Rotor condition. Is important, an off-flat or ribbed and grooved rotor will treble bed in times for street or track use, this is a harder and more durable pad and rotors should be in almost dead flat condition. If you need to have your rotors skimmed we recommend ONLY the very praiseworthy ON CAR brake lathes from Pro Cut.
Lifetime. ALWAYS inspect pads every 30 laps and discard when friction material is down to one eighth of an inch or 3mm to avoid fade. In street use the lifetime is considerable – 20,000 miles and upwards can be expected, even when driving hard.
Ducting and caliper drag. When using a street car brake system for racing, the mere insertion of a race formula pad does not transform your car into a track beast. Some cooling ducts often need to be added to give the brake system and pads a chance to survive race use.
Using Bluestuff NDX as a Street only pad. In Europe, the ECE R90 brake safety regulations require brake pads to have R90 certification when used on the road and with Bluestuff, this is not available for all cars. To find out if Bluestuff is R90 approved for your car, contact us.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP51208NDX
The product you are viewing cross references to these numbers
Sold as set of 4 pads for one axle.
PORSCHE 996 3.4 C2 / C4 97-2002 (Rear)
PORSCHE 996 3.4 C2 / C4 02-2005 (Cast Iron Disc Only) (Rear)
PORSCHE 996 3.6 C2 / C4 / C4S / Targa 2001-2005 (Cast Iron Disc Only) (Rear)
PORSCHE 997 3.6 C2 / C4 / C4 Targa 2004-2008 (Cast Iron Disc Only) (Rear)
PORSCHE 986 Boxster 2.5 1997-99 (Cast Iron Discs only) (Rear)
PORSCHE 986 Boxster 2.7 1999-04 (Cast Iron Discs only) (Rear)
PORSCHE 986 Boxster S 3.2 2000-04 (Cast Iron Discs only) (Rear)
PORSCHE 987.1 Boxster S 3.2 / 3.4 2004-08 (Cast Iron Discs only) (Rear)
PORSCHE 987.2 Boxster S 3.4 2008-12 (Cast Iron Discs only) (Rear)
PORSCHE 987C.1 Cayman 3.4 2005-09 (Cast Iron Discs only) (Rear)
PORSCHE 987C.2 Cayman 3.4 2009-12 (Cast Iron Discs only) (Rear)
EBC Bluestuff NDX
Super-Street & Trackday Brake Pads
Bluestuff NDX is a high friction sport and race material that now has R90 approval on almost all fitments for the EU. For USA and Asia markets where R90 does not apply, this compound is totally road safe and the perfect choice for performance vehicles driven hard on the road or track days.
Product Information
When we say "Trackday" don't underestimate this fantastic material.
The reason we draw users' attention to the words Trackday ( also known in the USA as lapping ) is because of this material's fantastic ability to bed in quickly. Weekend fit and go drivers do not want to spend their laps bedding in brake pads.
Yet when used on more serious race track drivers this material delights and up to rotor temps of 550C /1030 F Bluestuff is the way to go. This material has been used by numerous spec series cup car racing groups in Europe.
The NDX pad material is bonded to the steel backing plates using the patented NUCAP NRS hook system which raises shear and bond strength by a factor of five and prevents pad to plate separation. The pads are then baked and ground and feature high-volume Vee grooves to catch the larger amount of debris from track use.
Target use is all types of fast and heavier cars in performance and race driving with a much enhanced lifetime over our previous Yellowstuff grade pads.
R&D Manager Steve Payne checks out the first batch of the Bluestuff NDX material made with a revolutionary process to produce the highly acclaimed EBC Bluestuff NDX Race Pads. The process involves 5 steps never before used in friction materials and sets EBC Brakes firmly in the lead as a provider of brake friction.
Bluestuff is available in NDX high friction version at 0.52 Mu and a lower B version for many rear applications on lighter cars with a lower 0.42 Mu.
Performance
EBC Bluestuff are heat scorched which helps bedding times but you still need to take care especially on the highway and when using on part worn rotors. Use the brakes gently for 200 miles, gradually increasing demand on the brakes in a SAFE ROAD ENVIRONMENT until you feel totally confident and can evaluate their stopping distances in all traffic conditions.
Remember, it's down to you and your bedding-in process. If you do feel brake fade a couple of times and even smell the brakes, this is totally normal and once achieved and the brakes are allowed to cool, they will have improved a lot.
There are several ways of surface scorching pads and EBC has chosen an infra red lamp tunnel for surface preparation of its pad ranges. The furnace is now scorching all pads for resale including the Bluestuff NDX range.
Bedding Performance
The curve shows that friction builds quickly during bedding in even after 2-3 stops but in a real world TRACK USE where rotors may not be perfect and calipers not serviced weekly (like our lab dyno ones) the bedding in process with Blue may exhibit 20-25mm contact bands in the centre of the discs after 4-5 laps and on some standard street calipers some vibration.
This is simply the pad telling you " I cannot hold onto the disc at these torques until I am fully bedded in". If vibration happens you should continue driving whilst BRAKING EARLIER TO BE SAFE until the contact band widens to almost entire disc/rotor sweep at which point the vibration will stop. In street use the torques will not normally be enough to generate vibration during bed in but drive safely for 200 miles gentle brake use to bed in your new brakes and test them to performance in a safe and quiet road environment until you have total confidence that they are bedded. Hitting the brakes too hard, too soon can not only shorten pad life it may cause loss of brakes and an accident. Bed brakes in progressively.
Pre-bedding burns off a lot of the volatile organics in the brake pad surface by passing the pads under an apparatus similar to a toaster after manufacture for a few seconds; this chars the surface and the paint around the pad surface but the result is a major reduction in bed in time which all drivers will appreciate.
More information
Rotor condition. Is important, an off-flat or ribbed and grooved rotor will treble bed in times for street or track use, this is a harder and more durable pad and rotors should be in almost dead flat condition. If you need to have your rotors skimmed we recommend ONLY the very praiseworthy ON CAR brake lathes from Pro Cut.
Lifetime. ALWAYS inspect pads every 30 laps and discard when friction material is down to one eighth of an inch or 3mm to avoid fade. In street use the lifetime is considerable – 20,000 miles and upwards can be expected, even when driving hard.
Ducting and caliper drag. When using a street car brake system for racing, the mere insertion of a race formula pad does not transform your car into a track beast. Some cooling ducts often need to be added to give the brake system and pads a chance to survive race use.
Using Bluestuff NDX as a Street only pad. In Europe, the ECE R90 brake safety regulations require brake pads to have R90 certification when used on the road and with Bluestuff, this is not available for all cars. To find out if Bluestuff is R90 approved for your car, contact us.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP51208NDX
98635193913
98635193915
The product you are viewing cross references to these numbers
€146.72
Now €140.85
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery