Camshaft drive gear/inner sprocket puller for Porsche 911 - SR079
SR079
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
Cam drive gear/inner sprocket puller for Porsche 911
More than occasionally the inner sprocket on the end of the 911 camshaft is jammed or fused in place and refuses to budge. The confined space of the chain box makes it impossible to leverage the gear off, and even if you can get an edge, chances are you will only cock the gear, jamming it further, or possibly breaking a tooth on the gear (or even mar the cam itself).
STOMSKI RACING's SR079 centers over the end of the camshaft and slips behind the sprocket flange, allowing you to smoothly and effortlessly slide the gear off– protecting both the camshaft and the gear itself (and the curse jar!). Black oxide hardened steel with stainless steel drive bolt.
Designed to pull the seized inner sprockets from the ends of the camshafts on and early air cooled 911 likes SC's etc, probably up to mid-993 as we think by then they stopped using the pin you slide in from outer sprocket into available slot in the inner sprocket which the tool is for, it's held in place with woodruff key to end of camshaft.
More than occasionally the inner sprocket on the end of the 911 camshaft is jammed or fused in place and refuses to budge. The confined space of the chain box makes it impossible to leverage the gear off, and even if you can get an edge, chances are you will only cock the gear, jamming it further, or possibly breaking a tooth on the gear (or even mar the cam itself).
STOMSKI RACING's SR079 centers over the end of the camshaft and slips behind the sprocket flange, allowing you to smoothly and effortlessly slide the gear off– protecting both the camshaft and the gear itself (and the curse jar!). Black oxide hardened steel with stainless steel drive bolt.
Designed to pull the seized inner sprockets from the ends of the camshafts on and early air cooled 911 likes SC's etc, probably up to mid-993 as we think by then they stopped using the pin you slide in from outer sprocket into available slot in the inner sprocket which the tool is for, it's held in place with woodruff key to end of camshaft.
€172.50
Now €155.68
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Related products
Bearing grease. Porsche 356 / 911 / 912 / 924 / 928 / 944 / 968
Code: PCG04311000
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
- Porsche 914 (1970-1976)
Information
Bearing grease (200 g)
Fits:
Porsche 356 (1950 to 1965)
Porsche 911/912 (1965 to 1989)
Porsche 914 (1970 to 1976)
Porsche 924 / 924 S (1976 to 1988)
Porsche 928 (1978 to 1995)
Porsche 944 /2 (1982 to 1991)
Porsche 968 (1992 to 1995)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PCG04311000
The product you are viewing cross references to these numbers
Fits:
Porsche 356 (1950 to 1965)
Porsche 911/912 (1965 to 1989)
Porsche 914 (1970 to 1976)
Porsche 924 / 924 S (1976 to 1988)
Porsche 928 (1978 to 1995)
Porsche 944 /2 (1982 to 1991)
Porsche 968 (1992 to 1995)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PCG04311000
PCG04311000
The product you are viewing cross references to these numbers
Price: €27.57
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery
Camber adjustment tool. Porsche 911/944
Code: 1118
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Information
Camber adjustment tool. Rear axle.
Porsche ref number 00072191710
Fits:
Porsche 911
Porsche 968
Porsche 944
This special tool fits all Porsche 911, 924/944/968 trailing arm rear axles with torsion bar suspension and is used to adjust the camber.
For the adjustment, the vehicle is jacked up, the semi-trailing arm with the two screw connections released and rotated by means of this eccentric tool against the axle swords.
The tool has a galvanized surface with passive layer.
Quality "Made in Germany"
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1118
The product you are viewing cross references to these numbers
Porsche ref number 00072191710
Fits:
Porsche 911
Porsche 968
Porsche 944
This special tool fits all Porsche 911, 924/944/968 trailing arm rear axles with torsion bar suspension and is used to adjust the camber.
For the adjustment, the vehicle is jacked up, the semi-trailing arm with the two screw connections released and rotated by means of this eccentric tool against the axle swords.
The tool has a galvanized surface with passive layer.
Quality "Made in Germany"
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1118
1118
00072191710
The product you are viewing cross references to these numbers
€30.42
Now €27.45
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Key tool for locking the balance shafts. Porsche 924S / 944 / 968
Code: 1113
Vehicle Group
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Information
Special key for locking the balance shafts.
Porsche ref no 00072192000.
Fits:
Porsche 924 S
Porsche 944
Porsche 968
This tool is necessary for the exchange of the timing belt and allows the countering of the wheels during the process.
Made in Germany.
Note:
Trying to block the waves with pliers or lever is strongly discouraged: Not only by slipping the tool, but also by burrs on the roller, the new belt can be damaged.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1113
The product you are viewing cross references to these numbers
Porsche ref no 00072192000.
Fits:
Porsche 924 S
Porsche 944
Porsche 968
This tool is necessary for the exchange of the timing belt and allows the countering of the wheels during the process.
Made in Germany.
Note:
Trying to block the waves with pliers or lever is strongly discouraged: Not only by slipping the tool, but also by burrs on the roller, the new belt can be damaged.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1113
1113
00072192000
The product you are viewing cross references to these numbers
€45.63
Now €41.18
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery