Akrapovic Evolution header set (Titanium). Porsche 991.2 GT3 RS / Speedster 2019>> with OPF/GPF filter - E-PO
E-PO/T/6/1
Vehicle Group
- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
Information
Akrapovic Evolution header set (Titanium)
Fits:
Porsche 911 GT3 RS (991.2) with OPF/GPF 2019 - 2020
Porsche 911 Speedster with OPF/GPF 2019 - 2020
Evolution Header Set (Titanium) must be mounted together with:
• Slip-On Line (Titanium) system S-PO/TI/15
or
• Slip-On Race Line (Titanium) system S-PO/TI/8.
An additional original Porsche stock bracket (Porsche p/n: 99111147391) is required for mounting the Akrapovič exhaust system. Please read the instructions carefully before the start of the installation.
Evolution Header Set converts the slip-on system into a full system designed to give noticeably increased power at higher revs. Handcrafted titanium headers incorporate 100 cpsi sports catalytic convertors and side mufflers—all designed to increase power and torque—the Evolution Header Set utilizes integrated catalytic convertors and the functionality of the exhaust valves to deliver an out-and-out attack on the senses. With the valves in the open position, it delivers a sportier and hard-hitting sound, but also has the option of a lower sound level when the valves are closed, perfect for use in more everyday locations. Offering an increased weight savings in the area behind the engine and the rear axle, the reduction will enhance the handling and improve performance.
When installing Akrapovič aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovič aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.
THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
E-PO
The product you are viewing cross references to these numbers
Fits:
Porsche 911 GT3 RS (991.2) with OPF/GPF 2019 - 2020
Porsche 911 Speedster with OPF/GPF 2019 - 2020
Evolution Header Set (Titanium) must be mounted together with:
• Slip-On Line (Titanium) system S-PO/TI/15
or
• Slip-On Race Line (Titanium) system S-PO/TI/8.
An additional original Porsche stock bracket (Porsche p/n: 99111147391) is required for mounting the Akrapovič exhaust system. Please read the instructions carefully before the start of the installation.
Evolution Header Set converts the slip-on system into a full system designed to give noticeably increased power at higher revs. Handcrafted titanium headers incorporate 100 cpsi sports catalytic convertors and side mufflers—all designed to increase power and torque—the Evolution Header Set utilizes integrated catalytic convertors and the functionality of the exhaust valves to deliver an out-and-out attack on the senses. With the valves in the open position, it delivers a sportier and hard-hitting sound, but also has the option of a lower sound level when the valves are closed, perfect for use in more everyday locations. Offering an increased weight savings in the area behind the engine and the rear axle, the reduction will enhance the handling and improve performance.
When installing Akrapovič aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovič aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.
THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
E-PO
9GT254400B
9GT254400E
9GT254450B
9GT254450E
The product you are viewing cross references to these numbers
€10,001.95
Now €8,601.68
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery
Related products
Sports exhaust silencers Porsche 970 Panamera turbo and S
Code: TSPOPAN09.003.A
Vehicle Group
- Porsche Panamera Turbo V8 4.8L
- Porsche Panamera Turbo S V8 4.8L
- Porsche Panamera Turbo V8 4.8L (520Hp)
- Porsche Panamera Turbo V8 Executive
Information
Sports exhaust silencers.
Without exhaust valve
Fits:
Porsche 970.1 and 970.2 Panamera turbo and turbo S (2010-2016)
his exhaust system is not street legal. These mufflers can be fitted both on 2WD and 4WD modelsThe component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip
END TIPS DIMENSION - 90mm
The value refers to the external dimensions of the exhaust end tip
SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system
EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible
Without exhaust valve
Fits:
Porsche 970.1 and 970.2 Panamera turbo and turbo S (2010-2016)
his exhaust system is not street legal. These mufflers can be fitted both on 2WD and 4WD modelsThe component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip
END TIPS DIMENSION - 90mm
The value refers to the external dimensions of the exhaust end tip
SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system
EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible
€3,844.62
Now €3,652.39
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery