Even geduld aub… 
Even geduld terwijl we uw bestelling verwerken,
druk niet op de terugknop…
druk niet op de terugknop…
Voer hier uw btw-nummer in en klik op Verifiëren:
U hoeft het landcode-deel van uw btw-nummer niet in te voeren, omdat dit al is geselecteerd in uw factuuradres hierboven.
Uw gegevens zijn geverifieerd. Btw-nummer geregistreerd bij:
,
.
Uw bestelling wordt nu voor BTW-doeleinden op een nultarief gezet. Wij behouden ons het recht voor deze gegevens na uw bestelaanvraag te controleren en indien nodig opnieuw btw aan te rekenen.
Uw btw-gegevens werden niet herkend of waren ongeldig. Uw btw-nummer moet overeenkomen met het land van facturering zoals hierboven aangegeven. Dit wordt momenteel gespecificeerd als . U hoeft het landcode-deel van uw btw-nummer niet in te voeren, omdat dit al is geselecteerd in uw factuuradres hierboven.
De dienst voor het controleren van btw-nummers is momenteel offline. Geef uw btw-gegevens op in het veld opmerkingen of speciale instructies hieronder en wij passen een btw-korting toe na het plaatsen van uw bestelaanvraag.
Engine mount Hardware kit, with Standard bushing set. Porsche 996 / 997 - 997375MOUNTKIT.1
997375MOUNTKIT.1
Product voertuiggroep
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MKII GT3 / GT3 RS 2010-11
- Porsche 997 MKII Turbo 2010-13
Information
Engine mount Hardware kit, with Standard bushing set.
This gearbox mount replacement kit includes an OE Match standard-version bushing for the gearbox mount together with OE Porsche mounting components. It is intended for replacing the worn rubber mounting element while renewing the associated installation hardware at the same time. Designed for applications using gearbox mount reference 99737503303.
Fits:
Porsche 996 C2 / C4 2002 - 2005 TIPRTONIC
Porsche 996 TURBO 2001 - 2005
Porsche 996 GT3 2000 - 2005
Porsche 997 C2 / C4 2005 - 2008 TIPTRONIC
Porsche 997 TURBO 2007 - 2009
Porsche 997 TURBO 2010 - 2012 (G97.55)
Porsche 997 GT3 2007 -2011 (G97.90)
Diagram ref no 4, 5, 7 and the bushings marked in green
The gearbox mount supports the transmission and helps isolate drivetrain vibration from the chassis. A correctly functioning mount controls gearbox movement during acceleration, braking, and gear changes while helping reduce vibration, harshness, and unwanted drivetrain noise.
The included OE Porsche hardware provides fresh fixing components for installation, while the OE Match standard bushing is designed to restore original-style road use characteristics.
Functions:
• Replaces the gearbox mount bushing
• Standard-specification
• OE Match replacement
• Includes OE Porsche mounting hardware
• Helps support the transmission securely
• Helps control gearbox and drivetrain movement
• Reduces vibration, harshness, and unwanted noise
• Supports smoother drivetrain operation
• Suitable for gearbox mount repair or drivetrain restoration
• Provides a convenient hardware and bushing replacement kit.
Why Replace This Kit?
Gearbox mount bushes can deteriorate due to age, heat, oil contamination, vibration, and drivetrain load. As the rubber softens, cracks, or collapses, the transmission may move excessively under load. Worn gearbox mounts can contribute to vibration, knocking, drivetrain shunt, poor gearshift feel, or excessive movement during acceleration and braking. Mounting bolts and nuts can also corrode, seize, or become damaged during removal. Replacing the bushing and hardware together provides a more complete repair.
When to Replace This Kit
• Gearbox mount rubber is cracked, soft, or collapsed
• Excessive transmission movement is present
• Vibration is felt through the chassis or cabin
• Knocking occurs during acceleration or gear changes
• Gearshift feel has become harsh or unsettled
• Original mounting hardware is corroded or damaged
• Gearbox or drivetrain service is being carried out
• Transmission mounting system is being restored.
Where it fits on the car
This kit fits at the gearbox / transmission mounting point for applications using gearbox mount reference 99737503303.
Applications / Fitments
• Suitable for applications using gearbox mount reference 99737503303
• Designed for standard road-use gearbox mounting replacement
• Always verify vehicle fitment against the listed part numbers before ordering
Gerelateerde referentienummers
Gerelateerde, vervangen, kruisverwijzingen of alternatieve nummers ter vergelijking.
997375MOUNTKIT.1
Het product dat u bekijkt, verwijst naar deze nummers
This gearbox mount replacement kit includes an OE Match standard-version bushing for the gearbox mount together with OE Porsche mounting components. It is intended for replacing the worn rubber mounting element while renewing the associated installation hardware at the same time. Designed for applications using gearbox mount reference 99737503303.
Fits:
Porsche 996 C2 / C4 2002 - 2005 TIPRTONIC
Porsche 996 TURBO 2001 - 2005
Porsche 996 GT3 2000 - 2005
Porsche 997 C2 / C4 2005 - 2008 TIPTRONIC
Porsche 997 TURBO 2007 - 2009
Porsche 997 TURBO 2010 - 2012 (G97.55)
Porsche 997 GT3 2007 -2011 (G97.90)
Diagram ref no 4, 5, 7 and the bushings marked in green
The gearbox mount supports the transmission and helps isolate drivetrain vibration from the chassis. A correctly functioning mount controls gearbox movement during acceleration, braking, and gear changes while helping reduce vibration, harshness, and unwanted drivetrain noise.
The included OE Porsche hardware provides fresh fixing components for installation, while the OE Match standard bushing is designed to restore original-style road use characteristics.
Functions:
• Replaces the gearbox mount bushing
• Standard-specification
• OE Match replacement
• Includes OE Porsche mounting hardware
• Helps support the transmission securely
• Helps control gearbox and drivetrain movement
• Reduces vibration, harshness, and unwanted noise
• Supports smoother drivetrain operation
• Suitable for gearbox mount repair or drivetrain restoration
• Provides a convenient hardware and bushing replacement kit.
Why Replace This Kit?
Gearbox mount bushes can deteriorate due to age, heat, oil contamination, vibration, and drivetrain load. As the rubber softens, cracks, or collapses, the transmission may move excessively under load. Worn gearbox mounts can contribute to vibration, knocking, drivetrain shunt, poor gearshift feel, or excessive movement during acceleration and braking. Mounting bolts and nuts can also corrode, seize, or become damaged during removal. Replacing the bushing and hardware together provides a more complete repair.
When to Replace This Kit
• Gearbox mount rubber is cracked, soft, or collapsed
• Excessive transmission movement is present
• Vibration is felt through the chassis or cabin
• Knocking occurs during acceleration or gear changes
• Gearshift feel has become harsh or unsettled
• Original mounting hardware is corroded or damaged
• Gearbox or drivetrain service is being carried out
• Transmission mounting system is being restored.
Where it fits on the car
This kit fits at the gearbox / transmission mounting point for applications using gearbox mount reference 99737503303.
Applications / Fitments
• Suitable for applications using gearbox mount reference 99737503303
• Designed for standard road-use gearbox mounting replacement
• Always verify vehicle fitment against the listed part numbers before ordering
Gerelateerde referentienummers
Gerelateerde, vervangen, kruisverwijzingen of alternatieve nummers ter vergelijking.
997375MOUNTKIT.1
99737503303
9963750303
99637533103
99637503302
99737503302
99737503301
99637503303
Het product dat u bekijkt, verwijst naar deze nummers
Over de kit
Deze kit bestaat uit de volgende items:
1 x Busset voor transmissiebevestiging, standaard. Porsche 996 / 997 (99737503303KIT)
Eenheidsprijs: € 94,01
StockDue
2 x Stop voor transmissiebevestiging. Porsche 996 turbo / 996 GT3 / 997 turbo (99637525908)
Eenheidsprijs: € 23,76
InStock
2 x Zeskantbout versnellingsbaksteun en belhuis M12 x 1.5 x 100. Porsche 986 / 987 / 996 / 997 (99907201001)
Eenheidsprijs: € 8,31
InStock
2 x Transmissiesteun Lagersteun Zeskantmoer. Porsche 964 C4 / 993 C4 / 993 C4S / 993 Turbo HANDGESCHAKELD (90038000801)
Eenheidsprijs: € 3,72
StockDue
Prijs: € 165,59
Binnenkort gearriveerd