SuperPro

SuperPro for Porsche

The SuperPro range of polyurethane Porsche suspension bushes is manufactured by Zeder Corp of Australia for UK and European markets. These components are also widely used where the vehicle is intended for extreme conditions, including various forms of motorsport

A Quick Look at SuperPro

SuperPro information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.

Choosing the Right Fit for Your Porsche

Where SuperPro is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector or mounting type where relevant.

• Typical reasons to choose these bushes include tightening steering response, improving stability under braking, and curing vague rear-end movement on Porsches with tired rubber bushes.
• Common symptoms of worn or incorrectly fitted bushes are squeaks, binding, harshness, uneven tyre wear and tramlining, especially if alignment is not corrected after work.
• Plan for a full alignment after suspension work and tighten arms at normal ride height, not at full droop.
• Apply the specified grease during installation, and re-check fixings after a short bedding-in period.
• Be aware that noise and vibration can increase slightly depending on bush location and specification.

Browse by Category

If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.

Gearbox / Transmission — You change gearbox and transmission parts when you have shifting issues, noise, leaks, or when refreshing a high-mileage Porsche drivetrain. This can range from seals and mounts to clutches and internal components, helping restore smooth, predictable gear changes where listed.

• Rule out simple causes first: correct oil spec and level, sound mounts, and properly adjusted linkages before assuming internal gearbox failure.
• Avoid prolonged driving with a noisy or slipping transmission, as existing wear can escalate quickly.

Gearshift Control Parts — Gearshift control parts are replaced to cure vague or stiff selection and restore precise, confidence-inspiring shifts on applicable Porsche models. Linkages, cables and bushes are often renewed before opening a gearbox because external wear is common.

• If clutch operation is good but selection feels vague across several gears, suspect linkage or bushes rather than the gearbox itself.

Interior & Accessories — Interior parts and accessories are used to refresh worn touch points, replace broken trim, or add usability upgrades inside your Porsche. Where listed, they help restore factory fit and function or add subtle enhancements without changing the car’s core character.

• Check part notes carefully for model-year and interior-code specifics, as small changes in clips or finishes can affect fit.
• Use proper trim tools and renew missing or damaged clips during installation to minimise new rattles.

Short Gear Shift — Short shift components are chosen to reduce lever travel and deliver a tighter, more direct gearchange on suitable Porsche models. They are popular for fast-road or track use, or simply to modernise the driving feel where compatible kits are available.

• Consider refreshing bushes, cables and related mounts at the same time so the shorter throw is supported by tight, unworn components.
• A short shift does not inherently increase gearbox wear, but forcing very rapid shifts through tired synchros can accelerate existing issues.

Motorsport and Off-Road — Motorsport and off-road parts are selected when a Porsche is used on track, in competition, or over rough terrain. They focus on strength, protection, braking consistency and safety so the car copes better with higher loads and temperatures.

• Be clear about whether the car is mainly for road, fast-road or track/off-road use so you select upgrades that suit your intended driving rather than overbuilding.
• Some parts may affect comfort, noise or road legality, so always review individual product notes and local regulations.

Explore SuperPro at Design911

View the current SuperPro range for Porsche at Design911, then filter by model and category to narrow down to the right parts.